Fluance Fi70 User manual

Fluance Fi70 Quick Start Guide
1
Quick Start Guide
Fi70 - Bluetooth®Music System

Fluance Fi70 Quick Start Guide
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in anyway, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not place open ame sources on or near the unit.
16. Batteries must be disposed of in accordance with local environmental regulations. Please
recycle batteries!

Fluance Fi70 Quick Start Guide
3
Introduction
Fluance believes everyone should experience audio in its truest form, recreating the
performance the way the artist intended. Utilizing only superior components and expert
audio engineering, their products are a testament to the performance that can be achieved
when a passion for music takes center stage. The perfect complement to any audiophile’s
lifestyle, you’ll be enjoying live performances in your home for years to come.
Break-in Period
Our speakers have a Butyl rubber ring surrounding the cone. The break-in period allows the
rubber to loosen and stretch, allowing the cone a larger range of movement, which gives
a better sound reproduction. We recommend 10-12 hours of play at moderate volume to
achieve this.
What’s Included
Quick Start
Guide
3ft 3.5mm
Auxillary Cable
AM/FM
Radio Antennas
LIFETIME
Customer Support
Lifetime
Customer Support
2 Year
Warranty
Music System with Stand
and Mounting Hardware
VOL +
VOL -
TREBLEBASS
Remote
Control
2 ‘AAA’
Batteries
Power
Cord

Fluance Fi70 Quick Start Guide
4
Cabinet Buttons
1. Power ON/OFF
2. Source
3. Settings
4. Previous/Back*
5. Play/Pause
6. Next/Forward*
7. Volume Down
8. Volume Up
Remote Control Layout
1. Power ON/OFF
2. Volume
3. Source
4. Bass
5. Mute
6. Play/Pause
7. Forward/Back*
8. Settings
9. Treble
VOL +
VOL -
TREBLEBASS
1
1 3 5 7
2 4 6 8
5
7
6
8
2
3
4 9
*Note: Previous Track/Next Track (when on Bluetooth®);
Previous Station/Next Station (when on Radio Source)

Fluance Fi70 Quick Start Guide
5
First Time Use
Assembling The Stand (Optional)
OFF
ON
120V~60Hz
280W
FM AM
DC5V 2.1A
POWERAUXIN OPTICALIN
USBCHARGING
RADIO
OFF
ON
120V~60Hz
280W
FM AM
DC5V 2.1A
POWERAUXIN OPTICALIN
USBCHARGING
RADIO
VOL +
VOL -
TREBLEBASS
Attach the pole to the base
using the large screws and
washers.
Plug the Power Cord into
the Cabinet and into a wall
outlet.
Attach the pole to the
bracket using the small
screws.
Flip the Power Switch to the
ON position.
Attach the assembled stand
to the cabinet with the bolts.
Press on the Remote or
Cabinet.
Powering Up Your Music System
OFF
ON
12 0V~6 0Hz
280W
FM AM
DC 5V 2.1A
POWERAUXIN OPTICAL IN
USB CHARGING
RA DIO
OFF
ON
12 0V~6 0Hz
280W
FM AM
DC 5V 2.1A
POWERAUXIN OPTICAL IN
USB CHARGING
RA DIO

Fluance Fi70 Quick Start Guide
6
Listening To Music
Bluetooth® Setup
Optical Audio Signal Compatibility
The Fi70 does not support Dolby Digital Audio or DTS Audio. Locate Audio Output Settings
on your source device and ensure Dolby Digital is turned off. This setting is sometimes referred
to as PCM or Stereo. Some TV’s also require that audio output be enabled. This setting may be
referred to as External Speakers. Ensure this is selected as your speaker/audio output.
For instructions on a specic device, please consult the device’s user manual.
OFF
ON
120V~60Hz
280W
FM AM
DC5V 2.1A
POWERAUXIN OPTICALIN
USBCHARGING
RADIO
Playback Charging
OFF
ON
120V~60Hz
280W
FM AM
DC5V 2.1A
POWERAUXIN OPTICALIN
USBCHARGING
RADIO
Bluetooth
MY DEVICES
Settings
Fluance Fi70
OFF
ON
120V~60Hz
280W
FM AM
DC5V 2.1A
POWERAUXIN OPTICALIN
USBCHARGING
RADIO
AM
AUX Playback from mobile
devices.
Press until you see “BT”
on the LCD screen.
USB Charging for mobile
devices.
Connect to Fluance Fi70
from your mobile device’s
Bluetooth®settings.
AM/FM Antenna for radio
listening.
Play Music!
To reset Bluetooth® pairing,
press and hold the Play/Pause
Button for 3 seconds.
OFF
ON
12 0V~6 0Hz
280W
FM AM
DC 5V 2.1A
POWERAUXIN OPTICA L IN
USB CHARGING
RA DIO
Playback
Charging
OFF
ON
12 0V~6 0Hz
280W
FM AM
DC 5V 2.1A
POWERAUXIN OPTICA L IN
USB CHARGING
RA DIO
OFF
ON
12 0V~6 0Hz
280W
FM AM
DC 5V 2.1A
POWERAUXIN OPTICA L IN
USB CHARGING
RA DIO
AM

Fluance Fi70 Quick Start Guide
7
Setting The Time
Save Radio Presets
TIME
FM
08:30
MEM
OK
CH00
Press the Button until
you see “TIME” on the LCD
screen.
Use the Buttons to
cycle between AM or PM.
On the AM or FM input,
press the Buttons to
select the radio station you
wish to save.
Press the Button to
conrm.
Press the Buttons
to select the hour and press
the Button again to
conrm.
Tap the Button until you
see “MEM” on the display,
now press the Button to
continue.
Press the Buttons
to select the minute and
press the Button again to
conrm.
“OK” will now be displayed
on the LCD screen.
“CH00” will ash on the display.
Press the Buttons to
select the pre-set channel to
save to. Press the Button to
conrm.

Fluance Fi70 Quick Start Guide
8
Changing The Display
LCD MODE OK
Press the Button until
LCD is displayed.
Use the Buttons to
cycle between MODE, TIME,
and OFF.
Press the Button to
conrm the selection.
"OK"will be displayed on
the LCD screen.
MODE - Displays the current source
TIME - Displays the time
OFF - Turns the display off

Fluance Fi70 Quick Start Guide
9
Frequently Asked Questions
How do I adjust the Volume / Change the Bass or Treble?
Select the equalizer using the settings button on the touch panel or using the Bass/Treble EQ
buttons on the remote. Use the +/- buttons to increase or decrease volume accordingly. The
range of the BASS/TREBLE is -10 to 10 and the range of volume is 0 to 40.
What is “Auto-Pairing” and how does it work?
Auto-Pairing is a convenient connection feature implemented into all uance bluetooth
enabled speakers. If the connected Bluetooth enabled device leaves the connection range
of the Fi70 and returns at a later time, the device will automatically connect. If the device’s
Bluetooth function is disabled and then enabled at a later time, the device will automatically
connect as well. Please note that the Fluance Fi70 will only auto-pair to the last device that it
was connected to and if the Fi70 is set to its Bluetooth input.
What is the purpose of the USB port on the back panel?
The USB port is designed to charge any of your devices such as smartphones, tablets, music
players, etc., however, it cannot be used for playing audio les with the Fi70.
I can’t connect my device to the Fi70.
Please ensure Bluetooth is enabled on your device and attempt to re-pair with the Fi70.
Please consult the included Quick Start Guide. If more troubleshooting is needed consult the
full instruction manual which is located at Fluance.com/Support.
Another device is connected to the Fi70 and I wish to connect my device.
You can reset any Bluetooth connection by pressing and holding the “Play/Pause” button on
the remote/touch panel. The Fi70 will be available to connect to any new device for the next
30 seconds. If no device is found, the Fi70 will auto-pair back to the previously connected
device. Please note only one device can be paired at a time.
What is the range of the Bluetooth Connection?
The Fi70 operates with Power Class 2 Bluetooth devices, which have a range of approximately
33’ feet (line of sight).
How can I connect a turntable to the Fi70?
The best method to connect a turntable to the Fi70 is using an Aux to RCA cable. The RCA
connection would be connected to the turntable and the Aux connection would be connected
to the Fi70.

Fluance Fi70 Quick Start Guide
10
Certification Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

Fluance Fi70 Quick Start Guide
11
Warranty Information
Fluance gives the following warranty to the original customer of each new Fluance product
purchased from a dealer authorized by Fluance. Fluance warrants that each new product,
under normal use, is free from defects, subject to the terms and conditions set forth. If a
defect should occur within the warranty period, repairs will be made free of charge for parts
and labor when such defects are determined by us to be attributable to faulty materials or
workmanship at time of manufacture.
Warranty Period
The Fluance products listed below are warranted for parts and labor for the stated period
from the date of original purchase and are subject to the terms and conditions of the
warranty.
Home Audio Passive Speakers: Lifetime Warranty
Active/Powered Speakers: 2 Year Warranty
HiFi Turntables: 2 Year Warranty
Warranty Exclusions
• Products purchased from a dealer not authorized by Fluance.
• Products with the serial number defaced, altered or missing.
• Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect,
unauthorized modication or water damage.
• Defects or damage as a result of repairs performed by a person or party not authorized
by Fluance.
• Defects or damage occurring during shipping (claims should be made with the shipping
company).
To Obtain Warranty Service
Should your Fluance product require warranty service, please contact your Fluance Autho-
rized Dealer and send your product fully insured and freight prepaid to the nearest Fluance
authorized service center. Before sending to Fluance, you will be required to get a Return
Authorization Number from your dealer.
Products shipped without a valid Return Authorization Number will be refused. To avoid
possible shipping damage, make sure the product is properly packaged and well protected.
Include a copy of your original bill of sale as proof of warranty along with your name, home
and/or work telephone number(s), a complete return address and a detailed description of
the faults.
Products repaired within warranty will be returned freight prepaid. This warranty in itself is
not considered a valid proof of purchase. When applying for warranty repairs, you must
present the original copy of your bill of sale as proof of warranty.

Fluance Fi70 Quick Start Guide
12
Fluance.com