Philips FWD154/98 User manual

Version 1.0
FWD154
3141 785 33780
DVD Mini Hi-Fi System
/98
Published by LX 0913 Service Audio Subject to modification
© Copyright 2009 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
or otherwise without the prior permission of Philips.
CONTENTS
�
Technical specification ..................................................................1-2
Service measurement setup..........................................................1-3
Service aids .................................................................................1-4
Instructions on CD playability ................................................2-1..2-2
Disassembly diagram............ .......................................................3-1
Block diagram................................................................................4-1
Wiring diagram ..............................................................................4-2
Display board
Circuit diagram ..................................................................5-1..5-3
Layout diagram..................................................................5-4..5-5
AMP board
Circuit diagram .........................................................................6-1
Layout diagram..................................................................6-2..6-3
Cassette board
Circuit diagram .........................................................................7-1
Layout diagram..................................................................7-2..7-3
USB/Line in/Video out board
Circuit diagram .........................................................................8-1
Layout diagram.........................................................................8-2
DVD board
Circuit diagram ..................................................................9-1..9-4
Layout diagram.........................................................................9-5
Exploded view diagram ...............................................................10-1
Mechanical parts list....................................................................10-2
Electrical parts list........................................................................ 11-1

Tuner
FM
Tuning Range 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBu
<45 dBu
Search Selectivity <28 dBu
Total Harmonic Distortion <3%
Signal to Noise Ratio >45 dB
MW
Tuning Range 531 - 1602 kHz
Tape deck
Frequency Response
- Normal tape (type I)
63-8000Hz
(8dB)
S/N Ratio
- Normal tape (type I)
35dBA
Wow and flutter <=0.4%
DIN
Speakers
Speaker Impedance 8 ohm
Speaker Driver 3.5”woofer
Sensitivity >82 dB/m/W
Amplifier
Rated Output Power 2X20W RMS
Frequency Response 63 - 16000 Hz, ±3dB
Signal to Noise Ratio >62dB
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Video Decoding MPEG-2/MPEG-1
Video DAC 10 Bits
Signal System PAL/NTSC
Video Format 4:3/16:9
Video S/N 56 dB (minimum)
Composite Video
Output 1.0 Vp-p, 75 ohm
Audio DAC 24Bits / 96 kHz
Total Harmonic
Distortion <1%
Frequency
Response
4 Hz - 20 kHz (44.1
kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 44 kHz (96 kHz)
Total harmonic
distortion < 0.1% (1 kHz)
Channel separation 40 dB minimum (1 kHz)
S/N Ratio >65 dBA
General information
AC power 110-127V/220 -
240V, 50/60 Hz
Operation power
consumption
50W
Standby power
consumption
<10W
USB direct Version 2.0/1.1
Dimensions
- Main Unit (W x H x D)
- Speaker Box (W x H
x D)
220 x 290 x 271
mm
189 x 290 x 175
mm
Weight
- With Packing
- Main Unit
- Speaker Box
8.5 kg
3.8 kg
2 x 1.7 kg
TECHNICAL SPECIFICATION
1 - 2

1-3
LF Generator
e.g. PM5110
Recorder
Use Universal Test Cassette CrO2 SBC419 4822 397 30069
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
S/N and distortion met
e
e.g. Sound Technology ST170
L
R
DUT
or Universal Test Cassette Fe SBC420 4822 397 30071
LEVEL METER
e.g. Sennheiser UPM550
with FF
-
filter
S/N and distortion meter
e.g. Sound Technology ST1700B
L
R
DUT
CD
Use Audio Signal Disc
(replaces test disc 3)
SBC429 4822 397 30184
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
S/N and distortion meter
e.g. Sound Technology ST1700B
Frame aerial
e.g. 7122 707 89001
Tuner AM (MW,LW)
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday´s cage.
Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).
RF Generator
e.g. PM5326
Ri=50:
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
RF Generator
e.g. PM5326
S/N and distortion meter
e.g. Sound Technology ST1700B
Use a bandpass filter to eliminate hum (50Hz, 100Hz) and disturbance from the pilottone (19kHz, 38kHz).
Ri=50:
Tuner FM
MEASUREMENT SETUP

1-4
SERVICE AIDS
GB WARNING
All ICs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
ESD
CLASS 1
LASER PRODUCT
GB
Safety regulations require that the set be restored to its original
condition and that parts which are identical with those specified,
be used
Safety components are marked by the symbol !.
Lead free

Set remains closed!
N
Y
Play a CD
for at least 10 minutes
Y
playability
ok ?
N
playability
ok ?
add Info for customer
"SET OK"
check playability
N
Y
playability
ok ?
check playability
check playability
return set
Customer complaint
"CD related problem"
"fast" lens cleaning
1
2
3For flap loaders (= access to CD drive possible)
cleaning method 4is recommended
INSTRUCTIONS ON CD PLAYABILITY
2 - 1
Exchange CDM
1-4For description - see following pages

1
PLAYABILITY CHECK
For sets which are compatible with CD-RW discs
use CD-RW Printed Audio Disc ....................7104 099 96611
TR 3 (Fingerprint)
TR 8 (600µ Black dot) maximum at 01:00
• playback of these two tracks without audible disturbance
playing time for: Fingerprint 10seconds
Black dot from 00:50 to 01:10
• jump forward/backward (search) within a reasonable time
For all other sets
use CD-DA SBC 444A..................................4822 397 30245
TR 14 (600µ Black dot) maximum at 01:15
TR 19 (Fingerprint)
TR 10 (1000µ wedge)
• playback of all these tracks without audible disturbance
playing time for: 1000µ wedge 10seconds
Fingerprint 10seconds
Black dot from 01:05 to 01:25
• jump forward/backward (search) within a reasonable time
2
CUSTOMER INFORMATION
It is proposed to add an addendum sheet to the set which
informs the customer that the set has been checked
carefully - but no fault was found.
The problem was obviously caused by a scratched, dirty or
copy-protected CD. In case problems remain, the customer
is requested to contact the workshop directly.
The lens cleaning (method 3) should be mentioned in the
addendum sheet.
The final wording in national language as well as the printing
is under responsibility of the Regional Service Organizations.
4
LIQUID LENS CLEANING
Because the material of the lens is synthetic and coated
with a special anti-reflectivity layer, cleaning must be done
with a non-aggressive cleaning fluid. It is advised to use
“Cleaning Solvent
The actuator is a very precise mechanical component and
may not be damaged in order to guarantee its full function.
Clean the lens gently (don’t press too hard) with a soft and
clean cotton bud moistened with the special lens cleaner.
The direction of cleaning must be in the way as indicated in
the picture below.
Before touching the lens it is advised to clean the
surface of the lens by blowing clean air over it.
This to avoid that little particles make scratches on
the lens.
INSTRUCTIONS ON CD PLAYABILITY
2 - 2

DISASSEMBLY DIAGRAM VIEW
3 - 1 3 - 1
Loosen 8 screws PT3×12 in both sides.
a.Plug in the 220V AC power cord , set the menu to "CD" function,
and press "STANDBY-ON" button , Press "OPEN/CLOSE"to open CD door.
b.Pull out CD door
c.Press "OPEN/CLOSE" button to close the CD tray,
power off the mainset and unplug the AC power cord.
4) Remove top cabinet.
5) Loosen 2 screws PA3x18 to remove CD tray.
6) Loosen 6 screws T3×10 and 14 screws PT3x10 to remove Main board.
1
2
34
5
6
87
3) Loosen 6 screws BT3×12 in rear cabinet .
CD DOOR 1
2
12
3
4
5
6
1
2
3
⑵
⑶
⑷
⑸
⑹
⑺
⑻
⑼
⑽
⑾
⑿
PT 3x6螺
⑴

TUNER
FM/MW
TAPE
L/R
REC L/R L/R
EQ/VOL
PT2314
I2C
LCD DISPLAY
PT1621
IR SENSOR
KHS-313AAD MECHANISMS
LOADER
5-CHANNELS DRIVER
MCU CONTROLLER
DVD/USB
DECODER /SERVO
AMPLIFIER
4558+TDA8948
INPUT/OUTPUT TERMINALS
AUX ,LINE-IN ,USB-PORT
YUV , S-VHS ,CVB
,COAXIAL ,HEADPHONE
TU_VCC(+9V)
PWR_VCC
VCC_+5V
MCU_VCC(3.3V)
MCU_VCC(3.3V)
M+5V
AU_VCC
+30V
AU_VCC
POWER MANAGEMENT
+12V/+30V
MCU_VCC(3.3V)
VCC_+5V
USB_+5V
PWR_VCC(+9V)
TU_VCC(+9V) AU_VCC(+9V)
USB_+5V
SPHE8202LQ
PIC18F44J10
D5888S (TDA8947 x 2)
PT7312
LV23010
120V/240V
SET BLOCK DIAGRAM
4 - 1 4 - 1

SET WIRING DIAGRAM
4 - 2 4- 2

5 - 15 - 1
CIRCUIT DIAGRAM - DISPLAY BOARD
EQ/VOL PART

CIRCUIT DIAGRAM - DISPLAY BOARD
LCD PART
5 - 2 5 - 2

CIRCUIT DIAGRAM - DISPLAY BOARD
MCU PART
5 - 3 5 - 3

LAYOUT DIAGRAM - DISPLAY BOARD
COMPONENT SIDE VIEW
5 - 4 5 - 4

LAYOUT DIAGRAM - DISPLAY BOARD
COPPER SIDE VIEW
5 - 5 5 - 5

CIRCUIT DIAGRAM - AMP BOARD
6 - 1 6 - 1

LAYOUT DIAGRAM - AMP BOARD
COMPONENT SIDE VIEW
6 - 2 6 - 2

LAYOUT DIAGRAM - AMP BOARD
COPPER SIDE VIEW
6 -3 6 - 3

CIRCUIT DIAGRAM - CASSETTE BOARD
Cassette is not repaired,diagram for referrence only.
7 - 1 7 - 1

LAYOUT DIAGRAM - CASSETTE BOARD
COMPONENT SIDE VIEW
7 - 2 7 - 2

LAYOUT DIAGRAM - CASSETTE BOARD
COPPER SIDE VIEW
7 - 3
7 - 3