FlyDigi WASP 2 User manual

Flydigi

User Guide
STEP 2： Connect to device via Bluetooth
In Flydigi Game Center > Gamepad, tap Connect and
follow the instructions displayed to connect the
gamepad.
The paired gamepad will automatically reconnect
when it is turned on, as long as your device is within
the specified range and the Bluetooth is on.
If you wish to pair the gamepad with another device,
you must first turn off Bluetooth on the current device,
then go to Flydigi Game Center and tap Connect
Gamepad.
LB
Joystick
B
A
Power switch
Logo
(LED indicator)
LT
Lock
M
(No M button
in standard edition)
Charging Port
(Charging LED indicator)
Utool Cable
(to activate Android devices)
STEP1: Download Flydigi Game Center
Scan the QR code to download and install Flydigi
Game Center
GamePad
Disconnected Connect
Flydigi Device Only
App Store Google Play

STEP 3： Activate button mapping
(Android users only)
Follow the activation instructions in Flydigi Game
Center - Key Mapping to enable USB debugging and
complete the activation.
Pull out the Utool cable from Wasp 2, plug it into the
charging port of your device, then turn on the gamepad.
iOS users please skip toSTEP 4
If your device has Micro-USB only, you needto purchase
an additional Type-C to Micro USB adapter.
*
If your device prompts
you to authorize USB
debugging, tap OK.
Allow USB debugging?
The computer’s RSA key fingerprint is:
C7:BB:CC:19:26:38:24:97:09:C6:BE:98:EA:5B:16:D7.
Always allow this computer to debug.
Cancel OK
Once activation is successful, the indicator light will stop
blinking and stay in blue. You can then unplug the Utool
cable.
STEP 4： Install the gamepad
1. Press the lock button to pop up the handle.
2. Press on the handle until your device is secured.

Accessories Installation Instructions
M
Joystick
Follow the steps in the diagram to insert the buckle
of the M button into the holder at the back of the
gamepad and the M button will be automatically
placed in the correct position.
Follow the steps in the diagram to apply a force
perpendicular to the gamepad to remove or install
the joystick.
This part is only applicable to Elite version.
STEP 5： Start game
Please tap “Gamepad” > “Add Game” to add a
game downloaded from App Store or Google Play,
then open the game to start.
For all users across Android and IOS:
For a better gaming experience, please launch
the game inFlydigi Game Center.

Basic Operations
and LED indicator Status
Wireless frequency
Bluetooth range <10 m
iPhone 5s and above with iOS
9.3 and above.
Android devices with Android
6.0 and above & Bluetooth 4.0,
thickness of less than 10.5 mm
and width of less than 86 mm.
Android
iOS
Supported
Devices
Specication
Dimensions
Battery capacity
Charging time
Working current
280mAh
1.5-2 hours
Working current <4 mA; Standby current <0.2 mA
Turn
on/o
device
Bluetooth
Pairing
Normal
Mode
Reconnect
Low
Battery
Charging
Calibrate
joystick
Switch the power
button to the left.
LED indicator blinks
and gamepad
powers on.
LED indicator blinks
and gamepad
powers off.
LED indicator blinks
in blue and
gamepad enters the
pairing mode.
LED indicator stays
in blue when device
is connected.
LED indicator stays
in blue when device
is connected.
LED indicator blinks
in green slowly.
LED indicator blinks
in green quickly.
USB charging port is
connected to a
power source.
Charging is
completed.
Press and hold the
Logo and LB buttons
for 3 seconds when
device is on.
LED indicator blinks
in green twice after
the calibration is
completed.
LED indicator
stays in red.
LED indicator
turns off.
Switch the power
button to the right.
Power on the
device for the first
time.
Gamepad works
properly after the
pairing is
completed.
Paired devices
automatically
reconnect when
powered on.
Remaining power is
within 20% to 10%.
Remaining power is
less than 10%.
2402-2480MHz
83.25*82*36mm

1. 1dBm
Charging current
Battery life
Storage
temperature
Operating
temperature
Weight
Charging voltage: 5V; charging current < 280 mA80h
80 hours
-20°C to +80°C
Approx. 90g
0°C to +40°C
Name and Concentration of Toxic
or Hazardous Substances and
Elements
This table is based on the regulations of SJ/T 11364-2014
The environmentally-friendly use period of this product is 10
years based on normal operating conditions.
indicates that the concentration of the toxic or hazardous substance
in all homogeneous materials in this part is below the limit
requirement in GB/T 26572-2011
indicates that the concentration of the toxic or hazardous substance
in at least one homogeneous material of this part exceeds the limit
requirement in GB/T 26572-2011
Part Name
PCBA
Pb Hg Cd Cr PBB PBDE
Outer casing
Toxic or Hazardous Substances and Elements
Packaging
Wires
Polymer battery
Silicone
Metal, adhesive tape and
small structural parts
Conducted Peak
Output Power
Approx. 90gApprox. 90g
1.71dBm

Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment.
The device can be used in portable exposure condition without restriction.