Focal Point HURST SUITE Programming manual

F11

ASSEMBL Y INSTRUCTIONS
2
GB IE
1.0 IMPORTANT NOTES
© 2022 Focal Point Fires Ltd.
Section
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Contents
Important notes
Tools required
Hardware & parts list
Assembly
Installation
Cleaning/ finishing
Guarantee - terms and conditions
Page No.
2
2
2
3
6
6
6
2.0 TOOLS REQUIRED
CODE NAME FIGURE QUANTITY
A
WOOD
DOWELS
(8X30mm)
21PCS
BCAM LOCKS
(15X9mm)
18PCS
CCAM BOLTS
(6X40mm)
18PCS
D SCREWS
(3.5X25mm)
15PCS
E9PCS
F2PCS
3.0 HARDWARE & PARTS LIST
CODE NAME FIGURE QUANTITY
①TOP PANEL 1PCS
②FRONT PANEL 1PCS
③LEFT LEG 1PCS
④RIGHT LEG 1PCS
⑤LEFT SIDE
PANEL 1PCS
⑥RIGHT SIDE
PANEL
1PCS
⑦
INSIDE
PANEL
TOP
1PCS
Cross head screwdriver PZ2 (3 inches in length or greater)
Drill, 6mm and a 2mm suitable drill bit
Pencil
Tape measure
SCREWS
(4X30mm)
SCREWS
(3X12mm)
2PCS
SCREWS
(4X12mm)
G

3.0 HARDWARE & PARTS LIST - CONTINUED
3
GB IE
© 2022 Focal Point Fires Ltd.
STEP 1
With the front panel (2) now in the correct position, you are able to screw the front panel (2) to the left (3) and the right
(4) hand legs using the 3.5 x 25mm screws (D).
CODE NAME FIGURE QUANTITY
H
2PCS
IALLEN KEY 1PCS
J
K
GLUE
FIXING STRAP
(10g) 1PCS
CODE NAME FIGURE QUANTITY
⑧RIGHT INSIDE
PANELS
LEFT INSIDE
PANELS
HEARTH
BACK
PANEL
1PCS
1PCS
1PCS
1PCS
4.0 ASSEMBLY
Fixings Parts
D x 4 2
3
4
Fixings Parts
A x 2 PCS 2
3
4
②
③
④
Lay the left leg (3) and the right leg (4) along with the front panel (2) on a soft floor. Next insert a 8 x 30mm wooden dowel
(A) into the top of each leg with a small amount of glue (J).
STEP 2
WALL PLUGS
(6X30mm)
2PCS
⑨
⑩
A
A
③
②
④
D
D
D
D
11

⑦
⑧
4.0 ASSEMBLY - CONTINUED GB IE
4© 2022 Focal Point Fires Ltd.
Insert some glue (J) into the 6 x dowel holes in the rear of the right inside panel (8),left inside panel(7), right leg (4) and left
leg (3).Then insert the 6 x wooden dowels (A) into place. Place a small amount of glue (J) into the dowel holes in the right
inside panel(8),left insdie panel(9) and the inside panel top (7). Then insert the right inside panel (8) , left inside panel (9) and
inside panel top (7) onto the wooden dowels (A) on the rear of the surround. Once both right inside panel (8), left inside
panel (9) and inside panel top (7) are in position, screw the 11 x 3.5 x 25mm wood screws (D) in place, securing the right
inside panel (8) , left inside panel (9) and the inside panel top (7) to the surround.
Insert some glue (J) into the 4 x dowel holes in the right leg (4) and left leg (3). Insert the 4 x wooden dowels (A) into the
right leg (4) and left leg (3). Then with a cross headed screw driver, carefully screw 6 x cam bolts (C) in to the right leg (4)
and left leg (3). Place some glue (J) into the dowel holes in the ends of the left side panel (5) and right side panel (6). Insert
the left side panel (5) and right side panel (6) the correct way around on to the right leg (4) and left leg (3), making sure all
the inserts are in the correct position. Insert the cam locks (B) into the left side panel (5) and right side panel (6). Once in
position, turn the cam locks (B) with a cross headed screw driver clockwise to lock the parts together.
STEP 3 Fixings Parts
A x 4 PCS 2
3
4
5
6
2
3
4
5
6
7
8
9
B x 6 PCS
C x 6 PCS
Fixings Parts
A x 6 PCS
D x 11 PCS
STEP 4
⑨
④
④
②
②
③
③
⑤
⑤
⑥
⑥
B
B
B
A
A
C
C
C
B
B
B
A
A
C
C
C
A
A
D
D
D
D
D
D
D
D
D
D
D
A
A
A
A

①
⑦
⑧
Fixings Parts
A x 4 PCS 2
3
4
5
6
7
8
9
10
B x 6 PCS
C x 6 PCS
Fixings Parts
C x 6 PCS 1
STEP 5
STEP 6
4.0 ASSEMBLY - CONTINUED GB IE
Prepare the top mantle (1) by screwing 6x cam bolts (C) into position.
5
⑨
⑩
④
②
③
⑤
⑥
C
C
C
C
C
C
A
A
AA
B
B
B
B
BB
Firstly insert 4 x wooden dowels (A) with glue (J) into the top of the hearth (10). With a cross headed screw driver, carefully
insert 6 x single headed cam bolts (C) into the top of the hearth (10). For this step we recommend to use two people.
Carefully lift the surround over the hearth (10) ensuring that all 6 x single headed cam bolts (C) and 4 x wooden dowels (A)
insert the bottom edges of the surround. Once all 6 x single headed cam bolts (C) and wooden dowels (A) are correctly in
position, insert 6 x cam locks (B) into the rear of the surround and tighten together using a cross headed screw driver.
© 2021 Focal Point Fires Ltd.
CC
C
C
C
C

①
⑦
⑧
⑦⑧
⑧
4.0 ASSEMBLY - CONTINUED GB IE
6© 2022 Focal Point Fires Ltd.
Fixings Parts
A x 5 PCS
B x 6 PCS
1
2
3
4
5
6
7
8
9
10
Fixings Parts
E x 9 PCS 1
2
3
4
5
6
7
8
9
10
11
STEP 7
STEP 8
⑨
⑩
④
②
③
⑤
⑥
A
A
A
A
A
B
B
B
B
B
B
E
E
EE
E
E
E
E
E
11
Insert all 3 x cam locks (B) into each leg. The dowel joints (A) need to be glued in at each end of the surround. Connect the
top mantle to the surround, making sure all 6 x inserts are in their correct position. Once home, all 6 x cam locks (B) can be
tightened into position.
Offer the back panel (11) on to the rear of the surround. Ensuring that the plug cut out hole is at the bottom, line the edges
of the back panel (11) up with the edges of the inside panel (7), right inside leg (8) and left inside leg(9). Once correctly in line,
screw 9 x 3.5 x 12mm wood screws (E) through the rear of the back panel (11) and in to the rear of the inside panel (7) , right
inside leg (8) and left inside leg (9).

K
G
KG
F x 2
H x 2
K x 2
G x 2
Fixings Parts
G x 2 PCS
K x 2 PCS
1
2
3
4
5
6
7
8
9
10
11
Fixings Parts
F x 2 PCS
H x 2 PCS
1
2
3
4
5
6
7
8
9
10
11
STEP 1
STEP 2
7
To avoid splitting the rear of the surround, pre drill the holes, Then attach the fixing straps (K) to the rear of the surround
using the 4x12 screws (G)

8