Furniture of America CM-GM339T User manual

CM-GM339T
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
ASSEMBLY RATING
EASY DIFFICULT
1 / 8
TOOLS REQUIRED
MODEL #
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PST)
Questions?
2 - People
Recommended
VERSION # 20-01-08

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX8

4 / XXXXXXX8

GAME TABLE
CM-GM339T
PARTS
#1 1pc #2 1pc #3 1pc
#4
1pc
Table Top Apron Wood Panel Base
#5 4pcs
Leg
HARDWARE
#A 4pcs
#B
16pcs
#C
12pcs
#D
1pc
Bolt ∅5/16" x 1-3/4" Flat W asher ∅5/16" Hex Nut ∅5/16"
Wrench
#E 16pcs
#F
4pcs
Sponge Mat Lock Washer ∅5/16"
5 / 8
Please keep instructions for
future reference.
Check the quantity and
irregularity of parts and
hardware before you start.

Carton Designation Part Hardware
CM-GM339T-1
Table Top #1
#A x 4pcs
#B x 16pcs
Apron #2
#C x 12pcs
#D x 1pc
Wood Panel #3
#E x 16pcs
#F x 4pcs
CM-GM339T-2
Base
#4
Leg
#5
6 / 8
CM-GM339T is packed in 2 cases

1
2
#C
#D
1. Insert the threaded ends of the leg (#5) into
the holes along the sides of the base (#4).
Part
Part
Hardware
Hardware
2. Apply a washer (#B)
then a hex nut (#C)
onto the threaded
end from within.
Then secure using
the wrench (#D).
3. Repeat the process with
the remaining legs (#5).
2. Place the wood panel (#3)
onto the threaded ends
along the top of the base (#4).
3. Apply a washer (#B)
then a hex nut (#C)
onto the threaded
ends, then secure
using the wrench (#D).
1. Turn the base (#4) upright.
Part
Hardware
Hardware
#C
#B
#D
7 / 8

3
4
3. Insert the bolt assemblies
into the wood panel (#3)
and secure using the wrench.
1. Place the apron (#2)
face down onto a pro-
tected surface. Then
align the wood panel
(#3) to the holes
located in the center.
2. Prepare 4 bolt assemblies
by first inserting a lock
washer (#F) onto the bolt
(#A) then a washer (#B)
onto that same bolt (#A).
Part
Hardware
Hardware
Hardware
1. Turn the table upright.
2. Carefully place the
table top (#1) onto
the apron (#2).
Part
Hardware
#E
8 / 8