Madison Park Kirtley Writing Desk User manual

Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
H1
H2
H3
H4
Assembly Procedures:
Step 1. Assemble the Desk on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach Short Stretcher (P4) & Long Stretcher (P5) to the Short Frame Leg (P2) & Long Frame Leg (P3)
as shown below.
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
P1
P2
P3
P4
P5
Table Top
Short Frame Leg
Long Frame Leg
Long Stretcher
Short Stretcher
Bolts Ø5/16"*1-1/2"
Flat Washer Ø5/16"*3/4"
Allen Wrench 4mm
10
10
10
1
P2
P3
P5
P4
Kirtley Writing Desk
H4
Lock Washer Ø5/16"
H1
H2
H3
(H1)x4
(H2)x4
(H3)x4
Bolts
Lock Washer
Flat Washer
R
H5 Plastic Cap 4

Step 2. Turn over the Table Top (P1) on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach the Base to the Table Top (P1) as shown below.
Step 3: Turn the Desk over and place it upright on a level surface. Insert the Plastic Cap (H5) to cover the Bolt
holes as shown below. Assembly is complete.
(H1)x6
(H2)x6
(H3)x6
Bolts
Lock Washer
Flat Washer
H1
H2
H3
H4
P1
P3
P2
P5
P4
H5
(H5)x4 Plastic Cap
ADDITIONAL NOTE ABOUT SAFETY:
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE.
THEY SHOULD BE INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR
INJURY, AND ENSURE STABILITY.