FONESTAR FA-8080 User manual

DESCRIPTION
Wireless stereo Hi-Fi headphone system in 2.4 GHz. Connection to C through USB, with headphone and microphone transmission, C
playback and volume control. Line input accepting output signal from an M 3 player, TV, etc.
Compatible with headphones and headphones with microphone.
CONTROLS AND FUNCTIONS
TRANSMITTER
1.- SIGNAL: LED signal reception. It lights up green when a connection is
established between the transmitter and the receiver.
2.- POWER: LED power indicator. It will light up red when it is being powered.
3.- USB: audio and power supply USB input for connecting to C or just power
supply if connected to an audio source or an M 3 payer, TV, etc. Mini female
USB B connector.
4.- OFF/USB/LINE selector: for selecting from the following options: OFF, USB
input or line input.
5.- LINE INPUT: audio input for connecting to an audio source or M 3 player.
TV, etc. 3.5 mm stereo jack connector.
6.- TUNE: tuner button. ress this button to establish the connection between
the transmitter and the receiver.
RECEIVER
1.- MUTE: LED mute indicator. It lights up green when you press the MUTE button on
the receiver (deactivated mic. input).
2.- SIGNAL/POWER: LED signal reception and power indicator. When the receiver is
switched on, this LED indicator flashes 3 times consecutively. When the connection
between the transmitter and the receiver is established, this indicator will stay
alight.
3.- TUNE/13: tuner button. In USB mode, starts or stops audio file playback.
4.- MUTE: activates/deactivates the mic. input.
5.- One short press turns the audio output volume up. Besides, in USB mode, holding
the button down fast forwards to the following audio track.
6.- One short press turns the audio output volume down. Besides, in USB mode,
holding the button down rewinds to the previous audio track.
7.- q: receiver on/off button.
8.- Headphone output, 4-contact 3.5 mm jack connector for headphones with
microphone, compatible with stereo headphones. Use the microphone for voice
reordings in your C.
9.- LED recharge indicator. It lights up green while the battery is recharging. When
charging has finished, it lights up red.
10.- Recharge input, female mini USB B connector.
FA-8080
WIRELESS STEREO HI-FI HEADPHONE SYSTEM IN 2.4 GHZ
EN
160224_FA-8080_MANUAL_(EN)_Maquetación 1 24/2/16 15:49 Pá ina 1

INSTRUCTIONS FOR USE
- Make the basic connections in accordance with the images on the right. Use the
accessories supplied when needed.
- Select the operating mode desired with the switch on the transmitter (USB mode
or line input mode). The LED SIGNAL indicator will flash quickly 3 times.
- ress the OWER button on the receiver for 3 seconds to switch the receiver on.
The LED SIGNAL/ OWER indicator will also flash quickly 3 times.
- To synchronize the transmitter and the receiver, press the TUNE button on the
transmitter for 3 seconds until the LED SIGNAL indicator starts to flash quickly
and continuously. You have approximately 15-20 seconds to synchronize the
transmitter and the receiver.
- Then, press the TUNE button on the receiver for 3 seconds to establish the
connection with the transmitter.
- If they are not synchronized correctly, the LED SIGNAL/ OWER indicator on the
receiver and the LED SIGNAL indicator on the transmitter flash slowly and
continuously.
- If they are synchronized correctly, the LED SIGNAL/ OWER indicator on the
receiver will stay permanently alight.
Once synchronized, the LED SIGNAL indicator on the transmitter works in two
different ways depending on the selected operating mode:
1) USB mode: two quick continuous flashes.
2) Line input mode (LINE): stays alight continuously.
- Adjust the volume and fast forward or rewind audio file playback using the
corresponding controls on the receiver.
- To switch the receiver off, press the OWER button for 3 seconds until the LED
SIGNAL indicator switches off.
- To switch the transmitter off, select the OFF option on the transmitter selector.
SPECIFICATIONS
FA-8080
CHARACTERISTICS Wireless stereo Hi-Fi headphone system in 2.4 GHz.
Transmitter with power supply via USB adapter.
USB audio and line inputs.
Receiver with internal rechargeable battery.
Compatible with headphones and headphones with microphone.
Maximum transmission distance of 20 m in good conditions.
RESPONSE 20-20 000 Hz
INPUTS Transmitter:
1 audio, 3.5 mm stereo jack
1 power and audio USB, mini female USB B
Receiver:
1 recharge, mini female USB B
OUTPUTS Receiver:
1 headphone and microphone, 4-contact 3.5 mm jack
CONTROLS Transmitter: tuning and power selector, USB and line
Receiver: power, tuning, mute, playback on C and volume
INDICATORS Transmitter:
LED signal reception and power
Receiver:
LED signal reception, power, mute and recharge
POWER SUPPLY Transmitter: 5 V DC, 300 mA with adapter included or through USB
Receiver: rechargeable Li-ion battery, 300 mAh
DIMENSIONS Transmitter: 67 x 21 x 57 mm depth
Receiver: 62 x 23 x 63 mm depth
ACCESSORIES 1 x 3.5 mm stereo plug cable to 2 x RCA. 1 cable with 2 x 3.5 mm stereo plug. 1 cable with mini male USB
B to male USB A. Set of replacement silicone earpads. Headphones. Hanging strap
WARRANTY: 2 years against manufacturing defects, accompanied by proof of purchase. ost-purchase damage or breakage is not covered.
FONESTAR is a member of ECOEMBALAJES ES AÑA, S.A. “ECOEMBES”, with number 03497 and all our products carry the symbol, backed by our membership and
subscription to the above mentioned organization with the recycling and subsequent management of our packaging.
FONESTAR is registered in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI (Registro de establecimientos Industriales), with the entry
number 001851.
FONESTAR S.A. - NIF A28780443 - Apartado 191 - 39080 Santander, Cantabria (Spain)
www.fonestar.com
USB mo e
Line input mo e (LINE)
160224_FA-8080_MANUAL_(EN)_Maquetación 1 24/2/16 15:49 Pá ina 2