Forest DS-XL 591754 Series User manual

Quick start guide
FOREST DS-XL®LED WIFI DIMMER 591754X000
EN

Support
Visit www.forestgroup.com/wifisupport for technical support & troubleshooting.
configuration button
connection from 24V power supply connection to LED strip
LED strip indicator (after power ON)
Light up 100%
Dimmer is already connected to app
Flashing fast (twice per second)
Easy Connect mode
Flashing slow (each 3 seconds)
Access Point mode
Light up 100% after blinking for 3
minutes
Dimmer is not connected to app
Configuration button functions
Press shortly
Turn ON LED strip
Press twice shortly
Turn OFF LED strip
Press for 5 seconds (when LED strip
is blinking)
Switch between Easy Connect mode
& Access point mode
Press for 5 seconds (when LED strip
is not blinking)
Reset to factory default
Turn power OFF-ON-OFF-ON-OFF-
ON
Reset to factory default (LED strip
starts blinking)

Support
Visit www.forestgroup.com/wifisupport for technical support & troubleshooting.
Possible configurations:
DS-XL LED track without motor
DS-XL LED track with Shuttle S motor (<40kg curtain weight)
DS-XL LED track with Shuttle M motor (>40kg curtain weight)

Support
Visit www.forestgroup.com/wifisupport for technical support & troubleshooting.
QR scan
OR code
Forest DS-XL LED WiFi Dimmer installation
1. Assemble and/or install the DS-XL LED track and plug all connectors as in the diagram
of your configuration on previous page.
2. Download and install the Forest Connect App from the Apple App Store or Google
Play Store:
3. Connect your smartphone or tablet to your WiFi network.
Note: The WiFi dimmer only supports 2.4GHz networks.
During configuration the smartphone or tablet must be connected to the
same WiFi network to which the dimmer needs to be connected.
4. Launch the Forest Connect App and follow the in- app instructions.

Support
Visit www.forestgroup.com/wifisupport for technical support & troubleshooting.
Troubleshooting
1. I don’t see any lights on the LED strip after plugging in
- try to bypass the Wifi dimmer and watch
if the LED strip lights up:
when LED strip doesn’t light up, check the track connections
LED strip
- make sure the power adapter, Wifi dimmer and LED strip are plugged in
- disconnect the power, after 5 seconds, connect the power again.
- when LED blinks, follow the in- app instructions
- when the LED strip still doesn’t light up, turn power OFF-ON three times consecutively.
the LED strip should start blinking, follow the in- app instructions.
2. The WiFi dimmer won’t connect to my Wi-Fi network
- repeat the in- app configuration process
- make sure the right Wi-Fi network was chosen
- make sure the Wi-Fi password was entered correctly
- make sure the Wi-Fi dongle is within reach of the Wi-Fi router
- make sure the Wi-Fi network is 2.4gHz. 5gHz is not supported
- try switching the dongle to Access Point mode
3. I want to hard-reset the dongle to factory settings
Turn power OFF-ON three times consecutively
4. The LED is flashing slowly instead of fast or vice versa
Press and hold the configuration button for 5 seconds

Support
Visit www.forestgroup.com/wifisupport for technical support & troubleshooting.
Technical specification of the FOREST DS-XL® LED DIMMER
Part #: 5917541000 (white) and 5917546000 (black)
Voltage: 24 Vdc
Max. output LED power: 144W (24V-6A)
Functions: ON/OFF, 1-100% dimming
Dimensions: 86 x 46 x 16 mm (3.4” x 1.8” x 0.6”)
Net weight dimmer: 30 gr.
Ambient temperature: 0 - 40⁰C (32 - 104⁰F)
Relative humidity: 10 –80%
Maximum useable altitude above sea level: 2000m (6561ft.)
Protection class: IP20
Input: DC 2.1/5.5mm female
Output: DC 2.1/5.5mm male
Certification & Marking: CE
Technical specification of the FOREST DS-XL® LED STRIP
Part #: 5917503055
Width: 8mm
LEDs/meter: 120
Kelvin: 3000k (warm-white)
Power: 10 W/m
Flux: 100 lm/W
CRI: 90
The Forest DS-XL LED dimmer is not suitable for humid spaces, like bathrooms or outdoors.
It is important for the safety of persons to follow these instructions. Keep these instructions for future reference.
Do not use the product for any other purpose than intended. In order for the Forest DS-XL LED dimmer to function
correct and safe, the complete curtain system must be assembled with original parts and devices of Forest Group
Nederland B.V. This includes all components of the system, including power supply adaptor.
Forest Group does not assume liability for resulting damages to property or personal injury, defects, labour on location, service
calls, reinstallation or expenses involved in shipping, packing or returning goods, if the product has been abused/modified in any
way or damaged by improper use or failure to observe these operating instructions. The warranty/guarantee will then expire.
Do not allow children to play with the system or controls. Keep remote controls away from children.
Frequently examine the installation for imbalance and signs of wear or damage. Do not use if repair or adjustment is necessary.
v1.1