Forest 520100X481 User manual

FOREST WALL SWITCH WIRELESS TIMER –520100X481
08/2016 WDOC Diamond timer www.forestgroup.com v1.1
TECHNICAL SPECIFICATION:
● 3V battery type 2x CR2032 ● transmit range indoor max. 30mtr
● battery life < 3 years ● working temperature -10°C - +50°C
● frequency 433.92MHz ● transmit power max. 10mW
●touch screen ●magnetic wall bracket
●max. 8 timing points for opening or closing ● white - 5201001481 black –5201006481
Timing setting Signal status
Screen locking
Clock setting Battery status
Open command
Week display Time
Close command
Function button Down/Close
Left/channel - Stop
Right/channel + Up/Open
ON/OFF button
P button for programming
tubular motor etc.
unscrew the back side of the housing put in the two batteries
and slide the cover downwards mind the right polarity
WHEN BATTERIES ARE EMPTY:
After replacing the battery, the programmed receivers and motors will still function as normal. Also the timing
points will stay in the memory, only the running clock must be adjusted.
Please follow the local regulations for disposal of the empty batteries.
INSERT BATTERIES

FOREST WALL SWITCH WIRELESS TIMER –520100X481
08/2016 WDOC Diamond timer www.forestgroup.com v1.1
The Shuttle motor doesn’t respond to the wireless timer when the end limits of the motor are not set. Please
check by moving the curtain close and open by hand. Program a channel to a Shuttle motor:
PRESS BUTTON FOR PRESS BUTTON 3x LED MOVES FROM KEEP BUTTON GREEN LED PRESS OPEN
4 SEC. TO UNLOCK WITH A PIN 1e→ 2e→ 3eLED PRESSED FOR 5 SEC. STARTS BLINKING WITHIN 10 SEC.
SELECT DESIRED
CHANNEL
3x 1x long
press 4 sec. to unlock press again for 4 sec. press stop button change hours ˄ or ˅
press ˃ button change minutes ˄ or ˅ press ˃ button change day ˄ or ˅
press button for 4 sec. to save
SET TIME AND DAY
PROGRAM THE WIRELESS TIMER TO A SHUTTLE MOTOR

FOREST WALL SWITCH WIRELESS TIMER –520100X481
08/2016 WDOC Diamond timer www.forestgroup.com v1.1
Up to 8 timing points can be set to this device. Each timing point can transmit an OPEN or CLOSE command.
Menu item tree: default:
timing point number 1
timing point ON/OFF OFF
channel ALL (channel 1 to 15)
hours 12:
minute :00
command OPEN/CLOSE OPEN
day(s) ALL (Sun,Mon,Tue,Wed,Thu,Fri,Sat)
Use the < and > buttons to select in following order.
Use the UP (˄), STOP (□) or DOWN (˅) buttons to change the selected item
enter timing point setting:
press 4 sec. to unlock press again for 4 sec. press ˃ button to select press stop button to enter
timer menu timing point setting
select timing point number switch ON/OFF
change to desired press > button to go turn ON timing point ˄ press > button to go
timing point 1....8 to next step (or OFF ˅) to next step
SET TIMING POINTS

FOREST WALL SWITCH WIRELESS TIMER –520100X481
08/2016 WDOC Diamond timer www.forestgroup.com v1.1
select channel set hours
select a single channel or press > button to go change hours ˄ or ˅ press > button to go
ALL channels by pressing to hour settings to minute settings
the stop button
set minutes set command OPEN/CLOSE
change minutes ˄ or ˅ press > button to go select command: press > button to go
to OPEN/CLOSE settings open ˄or close ˅to day settings
set day(s) save and exit
select day activate/de-activate each press button for 4 sec.
day by pressing stop button to confirm and exit
A selection of days can be made
how to make a motor group:
Maximum of 8 timing points can be made for opening or closing by timer.
Example:
3 curtain tracks, track A, B and C. Track A → channel 1, track B → channel 2, track C → channel 3.
All 3 tracks are also programmed to channel 4. This is the group-channel.
Timing point 1 is set to Open at 7AM, channel 4, Mon, Tue, Wed, Thu, Friday.
Timing point 2 is set to Close at 19PM, channel 4, Mon, Tue, Wed, Thu, Friday.
Timing point 3 is set to Open at 9AM, channel 4, Sat, Sunday.
Timing point 4 is set to Close at 20PM, channel 4, Sat, Sunday.
Individual manual control: use channel 1, 2 or 3.
Automatic opening and closing:
Mon, Tue, Wed, Thu, Friday: Open 7AM, Close 19PM, track A, B and C
Sat, Sunday: Open 9AM, Close 20PM, track A, B and C