Forever Redwood THE PORTER THAYER GLIDER User manual

ASSEMBLY INSTRUCTIONS FOR THE
THE PORTER THAYER GLIDER
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
Drawing
Description
Base
Legs
Seat
Backrest
Qty.
1
2
1
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach the legs to the base. / To attach the
seat and the backrest to the legs).
5/16´´ X 2 ½´´ Lag Bolts
(To attach the legs to the base).
Note: Dimensions of your hardware will vary depending on size.

P| 3
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
No
1
2
3
4
DESCRIPTION
Base
Legs
Seat
Backrest
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
Step 1: Use 5/16´´ x 3 ½´´ bolts (A) and 5/16´´ x 2 ½´´ lag bolts (B) to attach the legs (2) to the base (1). Each part has a series
of numbers that indicate where to attach the part with the corresponding number.
Step 2: Attach the seat (3) to the legs with 5/16´´ x 3 ½´´bolts (A), as shown below. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2
5/16´´ X 3 ½´´ Bolts
2
3
1
5/16´´ X 2 ½´´ Lag Bolts
5/16´´ X 3 ½´´ Bolts

P| 5
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
Step 3: Finally, use 5/16´´ x 3 ½´´ bolts (A) to attach the backrest (4) to the legs. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
4
5/16´´ X 3 ½´´ Bolts

P| 6
THE PORTER THAYER GLIDER
www.ForeverRedwood.com
This completes the Glider assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.