Amart Furniture SHADOW2 51389 User manual

ASSEMBLY INSTRUCTION
SHADOW2 OUTDOOR BAR STOOL
ITEM CODE: 51389
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
151389
650

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
1
15
251389
1

PARTS LIST
No
HARDWARE LIST
Qty
A
Hexagon head screw
M6x100
8pcs
B
Seat cushion
1pc
C
Allen key
1pc
No
COMPONENT PARTS
Qty
1
Top
1pc
2
Cross bar
2pc
3
Legs
2pcs
351389

Step1:Attach the crossbars to one the chair legs using the hexagon screws (A).
Step 2: Attach the seat to the legs by using the hexagon screws (A) as show in the diagram.
Carefully tighten the screws using the allen key (B) provided.
Step3: Place seat cushion on the top of seat and connect unnapper loop and napper loop,
as shown diagram.
Step 4: Using 1 person carefully turn the chair upright.
451389
Step3: Place seat cushion on the top of seat and connect unnapper loop and napper loop,
as shown diagram.
Step 4: Using 1 person carefully turn the chair upright.

ASSEMBLY IS COMPLETE
551389

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from Amart Furniture.Please read
on for important information regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature. Because of
this, there will be natural variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each piec e of
furniture unique.
Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come.
CUSHIONS:
• Direct exposure to the Sun’s harmful UV rays is likely to cause rapid colour fading to fabrics.
For best results we recommend avoiding
exposure to direct sunlight
• To ensure product longevity it is recommended outdoor products are not left permanently
exposed to the elements
• Spot clean using mild detergent and a soft clean cloth. Rinse in lukewarm wate r
• Do not tumble dry
• Do not bleach
• Do not dry clean
• Cool iron only
TIMBERS:
• Prolonged exposure of timber items to the elements may cause premature deterioration
• Regular vacuuming and dusting of items is recommended
• Timber needs regular oiling. Please contact store of purchase for further details
• Minor cracking of timber is a natural process and will not compromise the strength of the
timber
• To extend the life of your product the use of an Amart approved Outdoor Furniture Cover is
highly recommended. Please contact store of purchase for further details