Forever Redwood THE SUMMERBREEZE SWING SETS User manual

ASSEMBLY INSTRUCTIONS FOR
THE SUMMERBREEZE SWING SETS
.
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
The Summerbreeze Swing Sets
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
7
Drawing
Description
Legs-A
Legs-B
Bottom Single Supports
Bottom Supports with
In-Between Blocking
Top Supports
Hanger Support
Roof Panel
Qty.
2
2
2
2
4
1
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
The Summerbreeze Swing Sets
www.ForeverRedwood.com
CONTENT OF BOXES
No.
8
9
10
11
12
Drawing
Description
Diagonal Supports
Roof Boards
Seat
Armrests
Backrest
Qty.
2
Will
Vary
1
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 3
The Summerbreeze Swing Sets
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
Drawing
Description
5/16´´ x 3 ½´´ Bolts
(To attach the Legs together. / To attach the
seat and the backrest to the armrests).
3/8´´ x 7´´ Bolts
(To attach the bottom and top supports to
the legs. / To attach the bottom supports
together).
3/8´´ x 9 ½´´ Bolts
(To attach the hanger support to the
legs-A).
5/16´´ x 4´´ Bolts
(To attach the roof panel to the legs).
5/16´´ x 4 ½´´ Bolts
(To attach the diagonal supports to the roof
panel).
5/16´´ x 6´´ Bolts
(To attach the diagonal supports to the
legs).
1 5/8´´ Deck Screws
(To attach the roof boards to the roof
panel).
2´´ Deck Screws
(To attach the roof boards to the roof
panel).
Note: Dimensions of your hardware will vary depending on size.

P| 4
The Summerbreeze Swing Sets
www.ForeverRedwood.com
HARDWARE LIST
No.
I
J
K
L
M
N
O
Drawing
Description
3/8´´ x 3 ½´´ Eyebolts
(To attach the backrest to the armrests).
5/16´´ Nuts
3/8´´ Nuts
3/8´´ x 7/8´´ Washers
Quick Links
Springs
Chains
Note: Dimensions of your hardware will vary depending on size.

P| 5
The Summerbreeze Swing Sets
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
9
10
11
12
DESCRIPTION
Legs-A
Legs-B
Bottom Single Supports
Bottom Supports with
In-Between Blocking
Top Supports
Hanger Support
Roof Panel
Diagonal Supports
Roof Boards
Seat
Armrests
Backrest
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 6
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 1: Use 5/16´´ x 3 ½´´ Bolts (A) to attach the legs A&B (1,2) together. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 2: Attach each bottom single support (3) to the legs with 3/8´´ x 7´´ bolts (B). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2
3
5/16´´x 3 ½´´ Bolts
3/8´´ x 7´´ Bolts
1

P| 7
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 3: Attach each bottom support with in-between blocking (4) to the legs with 3/8´´ x 7´´ bolts (B). Each part has a series of
numbers that indicate where to attach the part with the corresponding number.
Step 4: Attach the top supports (5) to the legs with 3/8´´ x 7´´ bolts (B). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
4
3/8´´ x 7´´ Bolts
5
3/8´´ x 7´´ Bolts

P| 8
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 5: Put the Quick Links (M) and the Springs (N) in the hanger support (6). After that, put the chains (O). Take a few minutes
to adjust the chain height to your preference.
Step 6: Use 3/8´´ x 9 ½´´ bolts (C) to attach the hanger support (6) to the legs-A. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Quick Link
6
6
3/8´´ x 9 ½´´ Bolts

P| 9
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 7: Attach the roof panel (7) to the legs with 5/16´´ x 4´´ Bolts (D). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 8: Use 5/16´´ x 4 ½´´ bolts (E) to attach the diagonal supports (8) to the roof panel and 5/16´´ x 6´´ bolts (F) to attach to the
legs. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
7
5/16´´ x 4´´ Bolts
5/16´´ x 4 ½´´ Bolts
5/16´´ x 6´´ Bolts
8
8

P| 10
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 9: Use 1 5/8´´ deck screws (G) to attach the first and the last roof boards (9) to the roof panels, the rest of roof boards will
be attached with 2’’ deck screws (H). Put the boards from the bottom to the top, the overlapping between these boards will be
of ¾´´. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 10: Attach the seat (10)to the armrests (11) with 5/16´´ x 3 ½´´ bolts (A). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
9
Attach with
1 5/8´´ Deck Screws
10
11
11
5/16´´ x 3 ½´´ Bolts

P| 11
The Summerbreeze Swing Sets
www.ForeverRedwood.com
Step 11: Attach the backrest (12)to the armrests with 5/16´´ x 3 ½´´ bolts (A) and 3/8´´ x 3 ½´´ eyebolts (I). Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
Step 12: Finally, use quick links (M) to join the chair swing to the chains (O).
12
5/16´´ x 4´´ Bolts
5/16´´ x 3 ½´´ Bolts
3/8´´ x 3 ½´´ Lag Bolts

P| 12
The Summerbreeze Swing Sets
www.ForeverRedwood.com
This completes the Swing Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.