Forever Redwood XL BENCH User manual

ASSEMBLY INSTRUCTIONS FOR THE
BENCH SWING SETS
XL BENCH
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
CONTENT OF BOXES - Frame Swing
No.
1
2
3
4
5
6
7
Drawing
Description
Posts
Legs
Supports
Diagonal Supports
Roof Supports
If ordered
Roof Panel
If ordered
Roof Board
If ordered
Qty.
2
2
1
4
4
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
CONTENT OF BOXES –Chair Swing
No.
8
9
10
Drawing
Description
Seat
Backrest
Armrest
Qty.
1
1
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 3
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
H
I
J
Drawing
Description
3/8´´ X 7´´ Bolts
(To attach the posts to the legs).
3/8´´ X 8´´ Bolts
(To attach the diagonals supports to the
posts and to the support).
5/16´´ X 3 ½´´ Bolts
(To attach the support to the posts. / To
attach the seat and the backrest to the
armrest).
5/16´´ X 5 ½´´ Bolts
(To attach the roof supports to the posts).
5/16´´ X 4´´ Bolts
(To attach the roof panels to the roof
supports).
3´´ Deck Screw
(To attach the roof panels to the diagonal
supports).
3/8´´ X 4´´ Eyebolts
(To attach the backrest to the armrest).
Quick Links
Springs
Chains
Note: Dimensions of your hardware will vary depending on size.

P| 4
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
HARDWARE LIST
No.
K
L
M
N
Drawing
Description
Washers
3/8´´ Nuts
5/16´´ Nuts
3/8´´ Nuts/ Eye Bolts
Note: Dimensions of your hardware will vary depending on size.

P| 5
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
No
1
2
3
4
5
6
7
8
9
10
DESCRIPTION
Posts
Legs
Supports
Diagonal Supports
Roof Supports
Roof Panel
Roof Board
Seat
Backrest
Armrest
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 6
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Option A –Without Swing Roof
Step 1: Attach the post (1) to the legs (2) with 3/8´´ x 7´´ bolts (A) and 3/8´´ x 8´´ bolts (B). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 2: Put the Quick Links (H) and the Springs (I) in the hanger’s support. After that, put the chains (J). Take a few minutes to
adjust the chain height to your preference.
3/8´´ X 8´´ Bolts
1
1
2
2
Quick Link
3/8´´ X 7´´ Bolts

P| 7
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Step 3: Use 5/16´´ x 3 ½´´ bolts (C) to attach the support (3) to the posts. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 4: Attach the diagonal supports (4) to the posts and to the support with 3/8´´ x 7´´ bolts (A). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Note: If your Swing Set doesn´t include roof, then go to step 8.
3
5/16´´ X 3 ½´´ Bolts
4
4
3/8´´ X 7´´ Bolts

P| 8
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Option B –With Swing Roof
Step 5: Attach the roof supports (5) to the posts with 5/16´´ x 5 ½´´ bolts (D). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
Step 6: Attach the roof panels (6) to the roof supports with 5/16´´ x 4´´ bolts (E) and to the diagonal supports with 3´´ deck screws
(F). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
5
5
5/16´´ X 5 ½´´ Bolts
6
6
3´´ Deck Screws
5/16´´ X 4´´ Bolts

P| 9
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Step 7: Use 3´´ deck screws (F) to attach the roof board (7) to the posts. Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
Step 8: Attach the seat (8) to the armrest (10) with 5/16´´ x 3 ½´´ bolts (C). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
3´´ Deck Screws
7
10
8
10
5/16´´ X 3 ½´´ Bolts

P| 10
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Step 9: Attach the backrest (9) to the armrest with 5/16´´ x 3 ½´´ bolts (C) and 3/8´´ x 3 ½´´ eyebolts (G). Each part has a series
of numbers that indicate where to attach the part with the corresponding number.
Step 9: Finally, use quick links (J) to join the chair swing to the chains (L).
3/8´´ X 3 ½´´ Eyebolts
5/16´´ X 3 ½´´ Bolts
9

P| 11
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
Option A –Without Swing Roof
Option B –With Swing Roof

P| 12
BENCH SWING SETS –XL BENCH
www.ForeverRedwood.com
This completes the Swing assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.