Forever Redwood CHAIR SWING User manual

Chair Swings (Seats Only) www.foreverredwood.com
866.332.2403; Outside the US: 619.600.5630 7am-7pm Pacific Time, Monday-Saturday
Assembly Instructions for:
CHAIR SWINGS (SEATS ONLY)

Chair Swings (Seats Only) www.foreverredwood.com
Thank you for purchasing Forever Redwood patio furniture. Forever Redwood is built by Old-
Growth Again Restoration Forestry (OGA). OGA is dedicated to restoration forestry. Sales of
patio furniture finance our restoration work in California redwood forestlands.
Tools required: ½-inch ratchet and a mallet or small hammer.
Content of Boxes:
Seat
Quantity
Description
Drawing
1
Seat (J1)
2
Arms (L1, L2)
2
Backrest (N1)
Hardware:
Quantity
Description
2
Chains
2
Springs
12
Quick Links
10
3 ½” x 5/16”Bolts, washers and nuts
2
Eyebolts 4”x 3/8”
The parts that go together have the same numbers written next to the predrilled holes they attach to.
Align the parts with the numbers as shown for ease of reference.
.
A

Chair Swings (Seats Only) www.foreverredwood.com
Step 2:
Attach backrest to seat sides with 1 eyebolt and 1 bolt, washers and nuts per side.
Step 1:
Attach seat sides to seat with 4 bolts, washers and nuts per side. Make sure the
numbers next to the predrilled holes match.
Eyebolt
Bolt

Chair Swings (Seats Only) www.foreverredwood.com
Thank you! If you have any questions, please call or email us.
Step 3:
Add the chain to the swing seat. Add the hardware provided to thread the eyebolts as shown
below. Take a few minutes to adjust the chain height to your preference. We recommend you
do not cut off the excess chain because you may want to readjust the heights later.