Forever Redwood RORY'S BIG PLAYGROUND SWING SETS User manual

ASSEMBLY INSTRUCTIONS FOR THE
RORY´S BIG PLAYGROUND SWING SETS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
Drawing
Description
Frame Legs
Lower Main Support
Main Structural Timber
Connector Timbers
Knee Braces
Wooden Seats
Qty.
2
2
1
4
2
3
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
G
Drawing
Description
3/8´´ x 11´´ Bolts
(To attach the frame legs / To attach the
frame legs to the main structural timber).
3/8´´ x 6 ½´´ Bolts
(To attach the frame legs).
3/8´´ X 12 ´´ Bolts
(To attach the main structural timber to the
frame legs).
3/8´´ X 7´´ Bolts
(To attach the connectors timbers and the
knee braces to the frame legs).
3/8´´ x 10´´ Bolts
(To attach the knee braces to the main
structural timber).
Chains
(To wooden seats and hangers)
Quick Links
(To hangers, wooden seats and chains)
Note: Dimensions of your hardware will vary depending on size.

P| 3
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
No
1
2
3
4
5
6
DESCRIPTION
Frame Legs
Lower Main Support
Main Structural Timber
Connector Timbers
Knee Braces
Wooden Seats
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Note: The structure must be assembled on its side, as shown.
Step 1: Open the frame legs (1) as shown.
1
1

P| 5
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 2: Pull out the cross support and line up to match the predrilled hole. After that, use 3/8´´ X 11´´ Bolts (A) with washer and
nut to secure in place.
Step 3: Use 3/8´´ X 11´´ Bolts (A) with washer and nut to attach the lower main support (2) to the frame legs. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
3/8´´ X 11´´ Bolts
2
3/8´´ X 11´´ Bolts

P| 6
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 4: Put the 3/8´´ x 6 ½´´ bolts (B) with washer and nut as shown.
Step 5: Place the frame legs in their site.
3/8´´ X 6 ½´´ Bolts

P| 7
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 6: Put the Quick Links (G) in the hangers. After that, put the chains (F). Take a few minutes to adjust the chain height to
your preference.
Step 7: Attach the main structural timber (3) to the frames legs with 3/8´´ X 12´´ bolts (C) with washer and nut. Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
3
Quick Link
3/8´´ X 12´´ Bolts

P| 8
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 8: Pull out the first cross supports and line up to match the predrilled hole. After that, use 3/8´´ X 11´´ Bolts (A) with washer
and nut to attach.
Step 9: Pull out the second cross supports and line up to match the predrilled hole. After that, use 3/8´´ X 11´´ Bolts (A) with
washer and nut to attach.
3/8´´ X 11´´ Bolts
3/8´´ X 11´´ Bolts

P| 9
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 10: Attach the connector timbers (4) to reinforce the connection between the frame legs and the main structural timber. Use
3/8´´ x 7´´ bolts (D) with washer and nut to attach. Each part has a series of numbers that indicate where to attach the part with
the corresponding number.
Step 11: Attach the knee braces (5) to the main structural timber with 3/8´´ x 10´´ bolts (E) and to the frame legs with 3/8´´ x 7´´
bolts (D). Don’t forget washers and nuts. Each part has a series of numbers that indicate where to attach the part with the
corresponding number.
3/8´´ X 7´´ Bolts
4
3/8´´ X 10´´ Bolts
3/8´´ X 7´´ Bolts
5

P| 10
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 12: Use quick links (G) to join the wooden seats to the chains (F).
6
Quick Link
6

P| 11
Rory’s Big Playground Swing Sets
www.ForeverRedwood.com
Step 13: Finally, with a couple of people helping, turn the swing right side up.
This completes the Playground Swing Set assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.