Forge FDSS90030 User manual

CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. FDSS90030
Serial No.
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assis-
tance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge.
CUSTOMER HOT LINE:
1-877-660-1666
Mon.–Fri., 6 a.m.–6 p.m. MST
USER’S MANUAL
Serial Number Decal

2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
USING THE GARAGE ORGANIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Note: A PART IDENTIFICATION CHART, a PART LIST, and an EXPLODED DRAWING are attached in the cen-
ter of this manual. Remove the PART IDENTIFICATION CHART, PART LIST, and EXPLODED DRAWING before
beginning assembly.
TABLE OF CONTENTS

3
1. Read all instructions in this manual before
using the garage organizer.
2. Use the garage organizer only as described
in this manual.
3. It is the responsibility of the owner to make
sure that all users of the garage organizer are
adequately informed of all precautions.
4. Do not use the garage organizer as a ladder
or a step stool.
5. Regularly inspect and tighten all parts of the
garage organizer. Replace any worn parts
immediately.
6. Do not allow children to play on the garage
organizer; do not allow them to move or ride
on the short or tall two-door locker or the
drawer cabinet.
7. When the short and tall two-door lockers
and the drawer cabinet are in the desired
positions, lock the front casters.
8. The work bench is designed to support a
maximum weight of 1,000 pounds. The short
and tall two-door lockers are designed to
support a maximum weight of 300 pounds;
each shelf is designed to support a maximum
weight of 50 pounds. The drawer cabinet is
designed to support a maximum weight of
300 pounds; each drawer is designed to sup-
port a maximum weight of 65 pounds. Always
distribute weight as evenly as possible on
the table top, the cabinet tops, the shelves,
and the drawers.
9. Load the short and tall two-door lockers and
the drawer cabinet with the heaviest objects
at the bottom. Remove heavy objects from
the tops of the short and tall two-door lock-
ers and the drawer cabinet before unloading
the bottoms.
10. The work bench is equipped with a Ground
Fault Circuit Interrupter (GFCI) on the back-
splash. The GFCI must be tested before the
outlets on the backsplash are used (see
TESTING THE GFCI OUTLET on page 17).
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the garage organizer.
IMPORTANT PRECAUTIONS
WARNING:Read all instructions before using the garage organizer. ICON assumes no
responsibility for personal injury or property damage sustained by or through the use of this product.

4
Locking Caster
Tall Two-
Door Locker
Lock
Short Two-Door Locker
Adjustable Foot
Work Bench
Power Cord
Drawer Cabinet
Cabinet Top
Standard Outlet
GFCI Outlet
BEFORE YOU BEGIN
Thank you for selecting the versatile FORGE garage
organizer. The FORGE garage organizer offers a
selection of features designed to organize and
enhance your workspace.
For your benefit, read this manual carefully before
using the garage organizer. If you have questions
after reading this manual, please call our Customer
Service Department toll-free at 1-877-660-1666,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please mention the product model number and serial
number when calling. The model number is
FDSS90030. The serial number can be found on a
decal attached to the work bench (see the front cover of
this manual for the location of the decal).
Before reading further, please examine the drawing
below and familiarize yourself with the parts that are
labeled.

5
Before beginning assembly, carefully read the
following information and instructions:
•Assembly requires two persons.
• Assembly is divided into four stages: (1) short
two-door locker assembly, (2) tall two-door locker
assembly, (3) drawer cabinet assembly, and
(4) work bench assembly.
•Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed. Do not
remove the table top from the box until
instructed to do so.
• For help identifying small parts, use the
PART IDENTIFICATION CHART in the center
of this manual. Note: Some small parts may
have been preattached for shipping. If a part is
not in the part bags, check to see if it has been
pre-attached.
•Tighten all parts as you assemble them, unless
instructed to do otherwise.
•As you assemble the garage organizer, make
sure all parts are oriented exactly as shown in
the drawings.
Assembly requires the included Allen wrenches
and the following tools (not included):
• One adjustable wrench
• One rubber mallet
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches. A pair of
pliers is also recommended.
ASSEMBLY
1
Door
Stop
Do not put a bolt
in this hole
Do not put a bolt
in this hole
50
50
57
57
22
21
20
19
50
50
1.
Have a second person hold a Cabinet Base (1) in
the position shown, with the door stop at the top.
Insert a Right-Tab Insert (22) into the indicated
corner of the Cabinet Base. Attach a Locking
Caster (19) and the Right-Tab Insert to the
Cabinet Base with three 5/16” x 2 1/4” Button
Head Bolts (57) and three 5/16” Nylon Locknuts
(50).
Attach a Left-Tab Insert (21) and a Non-Locking
Caster (20) to the indicated corner of the Cabinet
Base (1) in the same manner.
Repeat this step on the left side of the Cabinet
Base (1).
Short Two-Door Locker DO NOT ATTEMPT TO ASSEMBLE THE
GARAGE ORGANIZER WITHOUT CAREFULLY
READING EACH ASSEMBLY STEP.
For easy part identification, remove the PART
IDENTIFICATION CHART from the center of
this manual and lay it on the floor.
1
Before beginning, read the important
assembly information at the top of this
page and at the right.