Forge Orion MEN1067 User manual

Orion
Adjustable Height Stool
4803114
Model MEN1067
QUESTIONS?
Contact Customer Care
1-800-721-4191
Monday - Friday 8 - 5 Central Time
PARTS INCLUDED
ABCDE
x7
x1 x12 x1 x1
Short Bolt Medium Bolt Long Bolt Washer Wrench
1
x1
2
x1
3
x4
4
x1
5
x1
6
x1
7
x1
Place the cross frame 4on a clean surface,
with the holes facing upwards.
Attach the legs 3to the cross frame 4by
threading the long bolts Chalf-way into the
holes in the cross frame as shown, using
wrench E.
DO NOT fully tighten the bolts.
STEP 1
Attach the footrest 5to the legs 3by threading
the long bolts Chalf-way into the holes in the
legs, using wrench E.
Once bolts have been threaded into all holes,
fully tighten the bolts attaching the footrest.
Fully tighten the bolts from Step 1.
STEP 2
E
C
4
3
4
3
5
E
C
Holes facing
upward

Place assembly upright on a level surface.
Thread locking lever 6onto threaded post 2about
two-third of the way onto the post.
Screw threaded post 2into cross frame 4of stool as
shown, until locking lever 6contacts the cross frame.
Attach washer Dto the end of the threaded post 2using
short bolt A. Fully tighten short bolt A.
STEP 5
To set or adjust seat height, turn locking lever 6
counterclockwise to loosen the assembly and allow for
adjustment.
Turn seat clockwise to lower the seat.
Turn seat counterclockwise to raise the seat.
Turn locking lever 6clockwise until it firmly contacts the
cross frame 2in order to hold the seat in place.
NOTE: Spinning the seat while seated on the stool may
loosen the locking lever.
NOTE: Maximum recommended weight is 264 pounds
(120kg)
TO SET OR ADJUST THE SEAT HEIGHT
Attach the threaded post 2to the bottom of
the seat 1by threading the medium bolts Binto
the holes in the seat as shown, using wrench E.
Once bolts have been threaded into all holes,
fully tighten the bolts attaching the threaded
post.
STEP 3
Attach the seat back 7to the seat 1by
threading the medium bolts Binto the holes in
the seat as shown, using wrench E.
Once bolts have been threaded into all holes,
fully tighten the bolts attaching the seat back.
STEP 4
E
B
2
1
2
6
4
D
A
E
1
2
7
B