Coaster 951056 User manual

COASTERFURNITURE.COM
Fine Furniture for every stage of life
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
PAGE 1 OF 12
REVISION 0 : 12/11/2020
951056
ACCENT CABINET

951056
ITEM:
COASTERFURNITURE.COM
PAGE 2 OF 12
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIME
PARTS IDENTIFICATION
60 MINUTES
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
ALEFT SIDE
PANEL 1 PC
BRIGHT SIDE
PANEL 1 PC
CMIDDLE DIVIDER
PANEL 1 PC
DBOTTOM PANEL 1 PC
ETOP PANEL 1 PC
FCROSS PANEL 2 PCS
GBACK PANEL 2 PCS
HLEFT DOOR 1 PC
IRIGHT DOOR 1 PC

951056
ITEM:
COASTERFURNITURE.COM
PAGE 3 OF 12
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
HARDWARE IDENTIFICATION
Z
NO DESCRIPTION FIGURE Q’TY
1GLUE 15g 1 PC
2WOODEN DOWEL
Ø8x30mm 16 PCS
3CAM BOLT
Ø7x35.5mm SR 10 PCS
4CAM LOCK
Ø15x12mm SR 14 PCS
5BOLT
Ø9.5x55mm SR 6 PCS
6STICKER
Ø20mm 3 PCS
7CAM BOLT
Ø7x63mm SR 2 PCS
8WOODEN DOWEL
Ø8x50mm 2 PCS
9HANDLE 2 PCS
10 HANDLE BOLT
Ø4x25mm BLK 2 PCS
NO DESCRIPTION FIGURE Q’TY
11 HINGE
Ø35mm SR 4 PCS
12 HINGE SCREW
Ø4x15mm SR 16 PCS
13 LEG
47mm BLK 4 PCS
14 SUPORT LEG
Ø45mm BLK 1 PC
15 SCREW
Ø4x19mm BLK 8 PCS
16
SQUARE FLOOR
PROTECTOR
50x50mm
4 PCS
17
ROUND FLOOR
PROTECTOR
Ø50mm
1 PC
18 BACK PANEL
SUPPORT 6 PCS
19
BACK PANEL
SUPPORT SCREW
Ø3x19mm SR
6 PCS
Z11,Z13,Z14 not included in blister packaging.

951056
ITEM:
PAGE 4 OF 12 COASTERFURNITURE.COM
INCORRECT
CORRECT
STEP 2
STEP 1
8
x 2
2
Apply glue on all wooden dowels to
ensure integrity of the structure.
3
x 4
2
x 8
x 8
Ø8x50mm
A
B
2
3
C
- 1
F
- 2
F
8
2

951056
ITEM:
PAGE 5 OF 12 COASTERFURNITURE.COM
STEP 3
STEP 4
Apply glue on all wooden dowels to
ensure integrity of the structure.
4
6
7
x 2
x 6
6
4
x 2
x 2
6
4
x 6
4
1
4
- 1
F
C
1
7
A
- 2
F
B
4

951056
ITEM:
PAGE 6 OF 12 COASTERFURNITURE.COM
STEP 5
STEP 6
Apply glue on all wooden dowels to
ensure integrity of the structure.
5
x 6
D
5
1
x 4
13
x 1
14
x 8
15
13 14
13
13
15

951056
ITEM:
PAGE 7 OF 12 COASTERFURNITURE.COM
STEP 7
STEP 8
x 4
16
x 1
17
16
17
GG

951056
ITEM:
PAGE 8 OF 12 COASTERFURNITURE.COM
STEP 9
STEP 10
3
4
x 6
x 6
E
E
x 6
3
4
1
6

951056
ITEM:
PAGE 9 OF 12 COASTERFURNITURE.COM
STEP 11
STEP 12
12
x 8
(A)
(C)
(B)
(A)
(B)
(C)
H
I
H
I
12
12
x 8
11
x 4
10
x 2
9
x 2
9
10
11
12

951056
ITEM:
PAGE 10 OF 12 COASTERFURNITURE.COM
STEP 14
STEP 13
19
x 6
COMPLETE
18
x 6
18
19
19 18

951056
ITEM:
PAGE 11 OF 12 COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
1000mm(39.25")
395mm(15.5")
912mm(36")
285mm(11.22")
870mm(34.25")
392mm(15.43")
50mm(1.97")
383mm(15.08")
459mm(18.07")
337mm(13.27")
392mm(15.43")
459mm(18.07")

ANTI-TIPPING INSTALLMENT INSTRUCTIONS
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture
may result in injury and damage.
1. To attach the anti-tip strap, securely mount one end to the top of the case piece with
the 5/8” screw.
2. Position the case piece against the wall in the desired location.
3. Pull the anti-tip strap taut and mark the position of where you will secure the other end
on the wall.
4. Drill a 1-1/4” hole in the spot you marked.
5. Tap in plastic wall plug.
6. Fasten anti-tip strap with wall screw provided.
(Please install the anti-tiping kit in the middle of the case piece if only have one set of anti-tipping kit.)
WALL
PAGE 12 OF 12 COASTERFURNITURE.COM