800-521-6038 WWW.FORNEYIND.COM 32 800-521-6038 WWW.FORNEYIND.COM
TANK COMPONENTS
Assembly
The air hose, pressure gauge
and brass air manifold set are
assembled on the tank by the
fittings or bolts before putting into
service.
Operation
To Fill Air Tank:
Take this tank to a source of
clean, dry, compressed air. (Full
service gas station, truck stop,
etc. or any low pressure air
compressor available.) The
recommended fill pressure is
Use air chuck from the
air source to connect with
filler valve. Watch pressure
gauge and make sure
maximum air pressure does
3. Open air shut-off valve
(clockwise) to allow air to
flow into air hose.
To Inflate Tires
Connect the tire chuck to
tire valve, and inflate the
tire until tire pressure meets
manufacturer recommended
pressure.
Warning: The pressure gauge
on the tank does not indicate
the pressure in the object being
filled. Use a separate gauge to
check the object being inflated.
GENERAL SAFETY GUIDELINES
The following safety precautions
must be followed at all times along
with any other existing safety rules.
Read all manuals included
with this product carefully. Be
thoroughly familiar with the
controls and the proper use of
the equipment.
Inspect carefully for any
damage that may have
occurred during transit.
3. Only persons well acquainted
with these safety rules should
be allowed to use the air tool.
4.
5. Check air hoses for weakness
or any leakage before each
use. Make sure all connections
are secure.
6. This tank is designed to
connect with a low pressure
air compressor which is rated
7. Release air pressure by pulling
safety relief ring before
replacing parts.
8. Never attempt to repair or
modify this tank. Welding,
drilling or any other
modification will weaken the
tank resulting in damage and
possible explosion.
9. This tank is not equipped and
should not be used to supply
breathing air.
Maintenance
Remove accumulated
condensation in tank
periodically to prevent rusting.
Turn tank upside down
with manifold at the lowest
point and use low internal
pressure to force the water
through relief valve. (Further
instructions in Troubleshooting
information).
Brass Air
Manifold
Safety Relief
Valve Air Shut-o
Valve
Filler Valve
Pressure
Gauge
Tire Chuck
