Fosera POWER LINE User manual

Standing Fan
User Manual
Please read the safety warnings below carefully before using this
product.
Care and maintenance
When the fan is not in usage, it should be stored in a dry
location.
Always unplug the fan before cleaning or disassembling.
Clean the outside surfaces of the fan with a damp cloth
and mild detergent - do not allow water to enter.
Technical Specification
With the Fosera Standing Fan a pleasant indoor climate can be
achieved, and the life quality significantly improved. In hot and dry
areas of the world, solar powered cooling and ventilation
substantially increase home comfort.
It is the perfect product extension for our POWER LINE. Mobile
standing fans are adequate for focusing the air jet where it is
most desired. Following Fosera’s plug-and-play philosophy,
connect the Standig Fan to the Fosera LSHS or to the Fosera
EVO and move it where convenient to enjoy its pleasant breeze.
Medium-Power
Timer
High-Power
On / O switch
Nominal voltage 13 V
Voltage range 12V +/- 3V
Power 8.5 W
Current 653 mA
Airflow
Speed setting (high/med/low)
Blade diameter 16“
Cable 6 m
Height (max. height) 125 cm
Weight (net/gross) 3.93 kg / 4.5 kg
30.4 m3/ min
Low-Power
Contact:
Fosera Solarsystems GmbH & Co. KGaA
Beim Mühlbach 3
89171 Illerkirchberg
+ 49 (0) 7346 924 69 73
[e-mail]

Before you start
Unpack the fan ensuring that all the parts are present and
that there are no components left in the box. Also ensure
the product is free from all packing materials.
Do not connect the fan to the Fosera system until it is fully
assembled.
Do not connect the fan to the Fosera system if any of the
components, or the cable, appear damaged. In doubt
please contact the place of purchase.
This product can only be powered by Fosera POWER LINE.
To adjust the speed of the fan choose one of the 3 buttons
on the control panel.
This appliance is not a toy, please make sure that it is not
used by children without assistance or supervision if their
physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure they
do not play with the appliance.
Operation
In order to use the timer function use the 120 min. timer
knob on the control panel.
Connect the fan with the included cable to a Fosera system.
The power cord should be regularly examined for signs of
damage and the appliance is not to be used if the cord is
damaged. If the power cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly quali-
fied person in order to avoid hazard.
Warnings
This product is designed to be used inside. Do not use the fan
in the rain, near the fire or near other dangerous equipments.
Warranty
The Fosera Standing Fan comes up with 1 year warranty. During this
period we guarantee that our product is free from defects in material
or workmanship. Please contact your dealer or local Fosera sales
agent if you experience any problems with the product. Your local
dealer will then assess the defect and decide whether the product can
be repaired or has to be replaced. Fosera is not responsible for any
consequential damage or damage that exceeds the value of the
product. A warranty repair does not extend the warranty period. The
warranty becomes invalid if the device is used other than intended by
the manufacturer. This warranty does not cover failures caused by
incorrect installation, set up or unusual use. The warranty is also void
in case of repairs by any unauthorized or untrained person.