Panasonic F-35TMH User manual

Operating Instructions
DC fan
Contents Page
05
許淮棋
09
Safety precautions (Please always
follow these instructions)
Name of parts and how to
assemble
How to use
Cleaning and
storing
Emergency handling
Specifications
Service center Back cover
Correct use will help to save power
Attached warranty card
Thank you for purchasing Panasonic product.
Before operating this product, please read the instructions carefully,
and save this manual for future use.
To ensure your rights, be sure to ask the dealer to write the date of
purchase and the name of dealer, etc on the warranty card.
Before use Troubleshooting
How to use
Recycling
F-35TMH
35TMH
35TMH
16
台灣
Negative ion design has acquired the
Taiwan’s Utility Model patent No. 169699
5
10 13
14
15 16
15 16
15 16
5
10 13
14
15 16
15 16
15 16

Safety precautions Please always follow these instructions
To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations
written below.
The following symbols differentiate the levels of danger and injury that may result if you ignore the
illustrated content and improper use.
WARNING
This symbol indicates improper handling may cause a risk of death or
serious injury.
CAUTION This symbol indicates improper handling may cause a risk of injury or
damage to properties.
The following symbols indicate type of instructions to be observed. (The symbols given below are examples.)
This symbol denotes an action that is PROHIBITED.
This symbol denotes a COMPULSORY action.
WARNING
Never try to take apart, repair or
modify this product.
Taking apart is prohibited
Improper use usually
cause electric shock,
fire and injury.
repairing this product.
Always use with the supplied AC adaptor,
do not exchange to other AC adaptor in
order to avoid damage of the product.
May occur and cause fire or electric shock.
If need to replace AC adaptor, please
contact the service center or dealer.
Please do not turn on the product
unless blade and
guard are installed
properly.
Prohibit
It's easy to
cause injury.
When assembling or storing, do not
press the height adjustment screw
unless blade and guard are installed
properly.
Prohibit
Motor unit and slide pipe may come out
rapidly and cause injury.
Make sure the power plug of AC adaptor
is fully inserted into socket.
May cause fire or electric shock due to
overheat.
Do not use the damage plug or loosen
socket.
Do not immerse the product in
water, or put water on it.
Prohibit
It's easy to cause
short circuit and occur
fire and electric shock.
3
Contact the service center or dealer for

4

Please always follow these instructions
WARNING
Do not cut, modify. Do not forcefully bend,
twist or pull. Do not put near heating
appliances, or put anything heavy on.
Do not bundle.
Prohibit Prohibit
If damaged power cord or plugis used,
it's easy to cause electric leakage,
electric shock and occur fire.
Make sure to disconnect the plug when
cleaning and
storing away
the product.
Disconnect the
power plug Improper operating may cause
injury or electric shock.
Do not touch the plug with wet hands.
It may cause electric shock.
Disconnect the plug and wipe it with a dry cloth.
Disconnect the plug unless the produced is been
using.
CAUTION
Do not use the product at
the following locations.
Prohibit Prohibit Prohibit
It may cause health related issue.
Do not touch
It may cause injury.
The product may fall down and
cause injury.
When disconnecting the
plug, please grasp and pull
the plug,
not the cord.
It may cause
short circuit
or damage the power
cord, and occur fire or
electric shock.
CAUTION
If the power cord damaged,please contact the service center or dealer. Exchange by professional in order to avoid danger.
When using the product, do not connect with voltage regulator in order to avoid danger.
Do not operate this product by children.
Reminder : Do not place the product near insecticide, oil corrosive solvent.
(It may cause bad effects on quality, or damage the product.)
Before use
5
Do not expose yourself to wind
generated by the
productfor a
long time.
Do not use the product near
the obstacles or
unsafe place.
Wipe off dust on the power plug
periodically.
If the plug is used with dust
accumulated on it,humid air etc.
may cause poor insulation and fire.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities,
or lack of experiences and knowledge,unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Do not put your fingers into the
guard or any moving part of
the product.
Flame failure, catching fire,
explosion, short circuit, etc, may
occur and cause electric shock of fire.
Where it maybe exposed to
flammable gas or near sources
of flame such as gas ranges.

Name of parts
Blade
Guard
Clip
Cover of pipe
Stand
Base of stand
Control panel
Speed control
Remote control receptor
High speed
Base
AC adaptor
Remote control holder
Remote control
Height adjustment
Slide pipe
Guard frame
Negative ion
Front/Back cover
Handle
Logo cap
6

7

How to assemble
Remove the nut from the stand, and insert the stand into the base.
Insert the connection plug of the AC adaptor, fix the power cord into the clip, and then close
the cover to finish the assemble.
Stand
Nut
Reminder: Tighten the nut securely, not to be loosened.
Please follow the step order and install correctly before use
Remove the spinner,cap and guard
stopper nut.
Please keep the plastic bag for future store.
Fix the rear guard to the motor and
then tighten the guard stopper nut securely
Warning
Do not touch the negative
ion emission device when
installing to avoid injury.
Negative ion emission device
Motor shaft
Guard stopper nut
Cap
Spinner
Guard stopper nut
Spinner
Blade
Installing blade
Insert the blade into the motor shaft closely,
then tighten with spinner securely.
(counter clockwise direction)
Installing the front guard
Align the arrowhead of the front guard and
the red mark of the rear guard, and insert
the hook to the wire rod fully.
Engage the clip to fix the front and rear guard.
Red mark Arrowhead
mark
Rear guard clip press place Front guard arrowhead
mark, make sure to
insert into red mark
Make sure the clip
presses backward
Reminder:
This product belongs to double insulation, in order to ensure your safety, please assemble
the guard completely, make sure the clip presses in, then can start the operation.
If the front guard and the rear guard are not assembled as instruction, it may cause electric
charge accumulating phenomena and stop the negative ion from releasing normally.
Please make sure the front guard and the rear guard are assembled correctly.
Installing the base
Installing the blade
Before use
8
Tighten the nut from the bottom of base to secure the stand to the base.
Align each of 3 holes and 3 projections, then fix the rear
guard to the motor, tighten the guard stopper nut securely
(clockwise direction). (marks the arrowhead of the
rear guard points up)
This product belongs to double insulation,
in order to ensure your safety,
please assemble the clip completely.
Tighten every part securely to avoid the blade from coming out during the operation.
Engage the clip press backward.

Height adjustment
9
Loose the adjustment nut of slide pipe, adjust the
height of slide pipe to an appropriate position,
then tight the adjustment nut of slide pipe.
Fix the remote
control holder
on the stand.
Remote control
can be stored in
the remote
control holder.
Whether during the Auto swing mode or
not, the wind direction can be adjusted
by hand.
Horizontal swing Vertical swing
Adjust the desired angle
by oscillating to left and right
Adjust the desired angle
by oscillating to up and down.
Remote control holder
Swing (Oscillation)

10