FourStarGroup 11211717S User manual

MODEL: 11211717S
COFFEE TABLE

PARTS LIST AND HARDWARE
2
PARTS LIST

3
BEFORE YOU BEGIN , PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
PHILIPS
SCREWDRIVER
MALLET
RUBBER MALLET

ASSEMBLY INSTRUCTIONS
STEP 1
ATTACH WOOD DOWELS (1) TO THE HOLES IN THE LEGS (C)
USING WHITE GLUE (4) THEN ATTACH L-BRACKET (5) USING
TAPPING SCREWS (F) AS SHOWN.
4
BEFORE YOU BEGIN , PLEASE FOLLOW ASSEMBLY
INSTRUCTION CAREFULLY , FOLLOW STEP BY STEP.

STEP 2
ATTACH TOP PANEL (A) TO THE ASSEMBLED PART FROM STEP
1 USING WOOD DOWELS (1) ADN WHITE GLUE (4) THEN ATTACH
FURNITURE GLIDE (3) TO THE BASE OF THE LEGS (C) AS SHOWN.
5

STEP 3
ATTACH TAPPING SCREWS (6) TO THE L-BRACKET (5) AS SHOWN.
6

STEP 4
ATTACH SHELF PANEL (B) TO LEGS (C) USING C/B SCREW (2)
AS SHOWN.
THEN ALLOW GLUE TO DRY COMPLETELY.
7

8
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your COFFEE
TABLE please e-mail our Customer Service Department at:
[email protected]
or call us at [phone]
or [phone]
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
184 lbs
87 lbs