FourStarGroup 11213619 User manual

MODEL: 11213619
3 STORAGE BIN CABINET

PARTS LIST AND HARDWARE
2

3
BEFORE YOU BEGIN , PLEASE FOLLOW ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
PHILIPS
SCREWDRIVER

ASSEMBLY INSTRUCTIONS
STEP 1
1.1 INSTALL DOWEL (1) TO SIDE PANEL (A & B) WITH GLUE (4).
1.2 INSTALL DOWEL (2) TO BACK PANEL (F) WITH GLUE (4).
DOWEL - M5x20mm 2PCS
DOWEL - M6x30mm 2PCS
GLUE
4

SCREW 18PCS
GLUE
STEP 2
-ATTACH FIX PANEL (D) TO SIDE PANEL (A) & (B) AND BACK
PANEL (F) WITH GLUE (3).
5

DOWEL - M6x30mm 2PCS
DOWEL - M5x20mm 2PCS
GLUE
STEP 3
-ATTACH TOP PANEL (C) TO SIDE PANEL (A & B) AND BACK
PANEL (F) WITH GLUE (4).
6

STEP 4
-UNFOLD THE DRAWER (E) AND PUT IN THE CARDBOARD,
AS SHOWEN.
-SLIDE THE DRAWER (G) TO THE ASSEMBLED CABINET AS
SHOWN.
7

8
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your
3 STORAGE BIN CABINET
please e-mail our Customer Service Department at:
[email protected]
or call us at [phone]
or [phone]
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster