FourStarGroup 11222299 User manual

MODEL: 11222299
4 BIN WOODEN STORAGE
ORGANIZER

PARTS AND HARDWARE
2
A TOP PANEL (1PC)
SHORT SCREWS
B
C MIDDLE SPINDLE (8PCS)
D SHELF (4PCS)
F FOOT SPINDLE WITH BOLT (4PCS)
E MIDDLE SPINDLE WITH NUT (4PCS)
G BIN (4PCS)
(*NOTE: IMPORTANT TO USE THESE WHERE
SHOWN OR SCREWS CAN GO THROUGH TOP OF ITEM.)
LONG SCREWS
TOP SPINDLE -- SHORT WOOD SCREWS
ON ENDS (4PCS)

3
STEP 1:
1.1 PLACE TOP PANEL (A) ON SMOOTH SURFACE, SCREW TOP
SPINDLES (B) ON TOP PANEL (A) AS SHOWN.
1.2 ATTACH SHELVES (D) USING MIDDLE SPINDLES (C) AND
MIDDLE SPINDLE WITH NUT (E) AS SHOWN.
1.3 SCREW FOOT SPINDLES WITH BOLT (F) ON SHELF (D)
AS SHOWN.
A
BB
BB
D
D
D
D
E
E
EE
CC
C
C
CCC
C
FFF
F
*VERY IMPORTANT (PART B)
BE 100% SURE TO USE THE
SPINDLES "B" WITH SHORTER
WOOD SCREWS FOR THIS
SECTION SO WOOD SCREWS
DO NOT GO THROUGH TOP
OF YOUR NEW ORGANIZER
FRAME.
RIGHT-SIDE UP VIEW OF THE FRAME
ASSEMBLE SHELVES “D”WITH
BACK EDGE DOWNWARDS
ASSEMBLE “STEP2”WITH UNIT TOP UPSIDE DOWN ON SOFT SURFACE

Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your 4 BIN WOODEN
STORAGE ORGANIZER please e-mail our Customer Service
Department at: [email protected]
or call us at [phone]
or [phone]
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
4
STEP 2:
PUT BINS (G) ON EACH SHELF.
G