FourStarGroup 11213631 User manual

MODEL: 11213631
MULTI-PURPOSE
KITCHEN CART

PARTS LIST AND HARDWARE
2

3
BEFORE YOU BEGIN,
PLEASE FOLLOW ASSEMBLY INSTRUCTIONS CAREFULLY.
FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
OPTIONAL ASSEMBLY TOOL
RUBBER MALLET

ASSEMBLY INSTRUCTIONS
STEP 1
ATTACHE 4 PIECES OF PVC INSERT CAP (2) TO TOP PANEL
AS SHOWN
USING EITHER A SOFT RUBBER MALLET OR BY FIRMLY PRESSING THE
INSERT CAPS INTO THE TOP PANEL USING THE FLAT SIDE OF A BOOK OR
OTHER HARD FLAT SUREFACE TO PRESS THE CAPS INTO THE PANEL.
PVC INSERT CAP 4PCS
4

STEP 2
SCREW PVC LEGS (3) AND LONG TUBE (1) INTO TOP PANEL (A)
AND SHELF PANEL (B), THEN ATTACH SOCKET CASTER TO
PVC LEG.
5
PVC LEG 4PCS
LONG PVC TUBE 8PCS
38MM x 40MM SOCKET CASTER 4PCS

6
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your
MULTI-PURPOSE KITCHEN CART
please e-mail our Customer Service Department at:
[email protected]
or call us at [phone]
or [phone]
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
71 lbs
71 lbs
71 lbs
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.