FOXEER WildFire User manual

Introduction
Channel
02
FOXEER TECHNOLOGY CO.,LTD [email protected] www.foxeer.com
USER MANUAL WildFire is a diversity receiver which provides stable video
feed in various environments such as indoor, outdoor and
multi-path areas.
WildFire adopts a unique algorithm which benets from fast
switch between antennas without harm to video feed which
may happen in other brand receivers, the algorithm can
eectively minimize signal latency, increase switch rate and
prevent frame rolls.
Long press the middle button into Main Menu.
Check and choose all supported channels.
Short Left /Right click to browse
all the modes.
Main Menu
01
MAIN MENU
CHANNEL
FAVORITES
BAND SCAN
FINDER
SETTINGS

Channel CH A
Channel
B
R1
5658
At CHANNEL mode, you can check the current frequency,
choose frequency, check RSSI info , and choose the favorite
frequency.
Lists all selected favorite channels.
CHANNEL
R1
R2
R3
R4
R5
R6
R7
R8
Long press middle button: Go to the Main Menu.
Long press right button:
Choose/Cancel the favorite frequency.
Short click left/right button: Turn to other bands.
Short click up/down button: Turn to other frequency in the
same band.
Favorites
03
Favorites A
Favorites
B
R1
5658
Finder Finder R1
5658
At FAVORITES mode, you can check all the favorite frequency.
In the FINDER mode, only bottom RX works, patch antenna is
recommended.
Tracks the signal.
FAVORITE
F5
R1
Long press middle button: Go to the Main Menu.
Long press right button:
Choose/Cancel the favorite frequency.
Short click up/down button: Turn to next frequency.
Finder
04

Band Scan R1
Scan
In BAND SCAN mode, you can nd the best frequency, then
click it, setup to current frequency.
Scan channels, nd the best frequency.
FINDER
CHRNNEL : R1 (5658)
B :
Long press middle button: Go to the Main Menu.
Short click up/down button:
Turn to next frequency in the
same band.
Short click left/right button: Turn to next band.
Long press middle button:
Go to the Main Menu.
Short click left/right button:
Turn to next frequency in the
same band.
Short click up/down button:
Turn to next band.
Band Scan
05
BAND : R
R1
R2
R3
R4
R5
R6
R7
R8
Settings
In SETTINGS mode, you can setup based on personal
preference.
Set parameters.
Long press middle button:
Go to the Main Menu.
Short click up/down button:
Turn to next option.
Short lick middle button:
Enter/Confirm.
SWITCHING: Fast/Slow/O, control the 2 Rx switch rate, fast
is default.
OSD:
ON/OFF, Enable/Disable OSD info.
SHOW RSSI: 6 types of OSD RSSI style overlay on the screen.
LBR: Left Bar. CBR: Center Bar. RBR: Right Bar.
LDG: Left Digit. CDG: Center Digit. RDG: Right Digit.
FS SWITCH: ON/OFF.
ALL BANDS: ON/OFF, if on, all 72CH is available, of OFF, only
40CH works( A B E F R band).
FAN: ON/OFF, control the fan on and o.
Settings
06
SWITCHING FAST
OSD MENU ON
LBR
ON
OFF
OFF
SHOW RSSI
FS SWITCH
ALL BANDS
FAN
EXIT
OSD Menu
Show RSSI
Switching Fast
LBR

Size
Weight(net)
Compatibility
Interface
OSD
Firmware upgrade
Voltage
Consumption
Frequency
Menu
Antenna
42 x 25 x 23mm
23g
All FatShark Series, 3D STL Case
Provided for Attitude and Orqa Users
5 way button, 0.91" 128x32 OLED
screen, Micro-USB
Yes
Yes
5V~16V
0.4A±10%@5V
72CH 5.3-6.0Ghz (A, B, E, F, R, H, U, L, O)
Channel, Favorites, Finder, Band Scan
and Settings
2 x SMA
Specification
07

FOXEER TECHNOLOGY CO.,LTD [email protected] www.foxeer.com
用
户
手
册
产品简介
Channel 频道
02
WildFire野火是一款专为Goggle打造的分集接收机，可在室
内，室外和多路径反射等各种复杂环境中提供稳定的视频
输出。
WildFire采用独特的算法，得益于天线之间的快速切换算
法，能够提供无损的信号，该算法可以有效地最小化信号延
迟，提高切换速率并防止帧滚动。
长按中间键进入主菜单
查看/选择所有支持的频点。
短按左/右按键实现模式切换
Main Menu 主菜单
01
Channel CH A
Channel
B
R1
5658
MAIN MENU
CHANNEL
FAVORITES
BAND SCAN
FINDER
SETTINGS

Finder R1
5658
在该模式下，用户可以查看目前使用的频点，选择频点，查
看RSSI信号， 并且可以将频点加入收藏夹。
查看所有收藏的频点。
CHANNEL
R1
R2
R3
R4
R5
R6
R7
R8
长按中间键 - 返回主菜单
长按右键 - 添加/移除当前收藏的频点
短按左/右键 - 选择不同频段
短按上/下键 - 选择同频段中不同频点
Favorites 收藏夹
03
Favorites A
Favorites
B
R1
5658
在该模式下，用户可以查看收藏的所有频点，还可以进行删
除操作。
Finder
在该模式下，下面的RX模块起主要作用，推荐使用平板天线。
跟踪信号。
FAVORITE
F5
R1
长按中间键 - 返回主菜单
长按右键 - 选择/移除当前收藏的频点
短按上/下键 - 选择下一个频点
Finder 寻机
04
FINDER
CHRNNEL : R1 (5658)
B :
长按中间键 - 返回主菜单
短按左/右键 - 选择不同频段
短按上/下键 - 选择同频段中不同频点

长按中间键 - 返回主菜单
短按上/下键 - 选择下一个参数
短按中键 - 设置/确认
Switching (切换速度): Fast (快)/ Slow (慢)/ Off (不切换)，
控制2个RX切换速度，默认为快，建议不更改。
OSD (菜单): ON(开)/ OFF (关)，开 启 /关闭OSD信息。
SHOW RSSI (RSSI显示): 6种显示模式。
LBR: 屏幕左柱状
CBR: 屏幕中柱状
RBR: 屏幕右柱状
LDG: 屏幕左数字
CDG: 屏幕中数字
RDG: 屏幕右数字
FS Switch (切换): ON (开) / OFF (关)
All bands (全频72CH): ON (开) / OFF (关), 如果设置为
开 ，所 有 72CH频点都可用，如果设置为关，40CH频点可用
(A B E F R频段)。
Fan (风扇): ON (开) / OFF (关)，控制风扇开关。
SWITCHING FAST
OSD MENU ON
LBR
ON
OFF
OFF
SHOW RSSI
FS SWITCH
ALL BANDS
FAN
EXIT
R1
Scan
BAND : R
R1
R2
R3
R4
R5
R6
R7
R8
Band Scan
在该模式下，查到最佳频点，点击即可设置为当前频点。
查找最佳频点以及存在的干扰源 。
长按中间键 - 返回主菜单
短按左/右键 - 选择同频段中不
同频点
短按上/下键 - 选择不同频段
Band Scan 频段扫描
05
Settings
在该模式下，根据自己需求进行设置。
设置参数。
Settings 参数设置
06
OSD Menu
Show RSSI
Switching Fast
LBR

尺寸
重量
兼容
接口信息
OSD
固件升级
输入电压
功耗
支持频率
菜单
天线接口
42 x 25 x 23mm
23g
Fatshark HD系列肥鲨眼镜, Attitude和
Orqa系列眼镜需要单独3D打印外壳
5向按键,0.91" 128x32 OLED 屏幕,
Micro-USB
支持
支持
5V~16V
0.4A±10%@5V
72CH 5.3-6.0Ghz (A, B, E, F, R, H, U, L, O)
频率, 收藏夹, 寻机 ,频段扫描, 设置
2 x SMA (内孔)
Specification
07