Foxfury Lighting Solutions D3060 User manual

PRODUCT MANUAL
700-310-TC | 700-319
D3060D3060

2
TABLE OF CONTENTS
INTRODUCTION
Reference Guide 3
Overview 4
Physical Characteristics 4
BATTERY
Charging the Battery 5
OPERATIONAL MODES
Modes, Output & Battery Life 5 - 6
INSTALLATION 7
WARNINGS/WARRANTY 8
CARE/CLEANING 8
CONTACT FOXFURY 9

3
D3060 REFERENCE GUIDE
FULL ASSEMBLY
BASE/MOLLE MOUNT
CHARGING PORT
FRONT LIGHT
BASE/MOLLE
MOUNT
DORSAL LIGHT
POWER/MODE SWITCH
FOR FRONT LIGHT
CHARGING PORT
POWER/MODE SWITCH
FOR DORSAL LIGHT
USB-C
STRAP INSERT
ROTATES 360°
WHAT'S INCLUDED
FLAT MOUNTING PAD* OPS-CORE MOUNT*
BASE/MOLLE MOUNT
Base/MOLLE Mount
3M Dual Lock Strip (2 ea)
USB-C Cable
D Series Mount Set* includes
(*P/N 700-319 Only):
• Flat Mounting Pad
• Ops-Core Mount
• Base/MOLLE Mount
• 5915 VHB Tape
• 3M Dual Lock Reclosable
Fastener (2 ea)

4
WARNINGS
Please fully charge the D3060 before using it for the first time.
Do not stare into the LEDs for long periods of time or from a close range
(less than 2 ft / 0.6 m).
While using any FoxFury product, please operate at safe speeds.
Be sure to rinse the D3060 with fresh water immediately after use in the
ocean or
a pool.
It is the responsibility of drone/UAV users to follow FAA and global laws
and regulations and/or the laws and regulations applicable to the flight
location.
OVERVIEW
The D3060 is a multi-function utility light. It mounts to most drones, MOLLE,
and straps via the Base/MOLLE mount with provided 3M Dual Lock Strips or
customer supplied straps. Its 30° and 60° dual LEDs can operate with a high,
low, or strobe mode to provide omni-directional lighting. This rechargeable and
waterproof light is durable and compact for a variety of uses where light is
needed in a tight space.
IMPORTANT!
Please fully charge the D3060 before using it for the first time. Please read
this manual before using your D3060 as it relays beneficial operating and
safety Information.
PHYSICAL CHARACTERISTICS
DIMENSIONS 1.3 x 2.3 x 0.9 in (33 x 58 x 23 mm)
WEIGHT 1.3 oz (37 g) with Base/MOLLE Mount

5
WHITE LIGHT MODE LUMENS BATTERY LIFE
FRONT LIGHT ONLY
HIGH 200 1.5 hours
LOW 60 2.5 hours
STROBE 200 2 hours
DORSAL LIGHT ONLY
HIGH 160 1.7 hours
LOW 50 3 hours
STROBE 160 2 hours
BOTH FRONT AND
DORSAL LIGHTS
HIGH N/A* N/A*
LOW 60 FRONT
50 DORSAL 2 hours
STROBE 200 FRONT
160 DORSAL 1.5 hours
*Thermal protection circuit will automatically reduce the Dorsal Light to low mode when the Front Light is
on high mode. The battery life for this setup is 1 hour.
OPERATIONAL MODES
WARNINGS:
Unplug the light once charged to avoid impacting battery life.
If battery is fully discharged because the unit may have not been in use for
many months, please charge fully.
CHARGING THE BATTERY
Connect the provided USB-C Cable to the Charging Port, and to a USB
port.
While charging, a red light will be on. Once charged, it will turn to green.
Charge time should be approximately 1.5 hours.
BATTERY
P/N 700-310-TC

6
OPERATIONAL MODES
Press the Dorsal Light Power/Mode Switch once to turn the Dorsal Light
on to HIGH.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
to LOW.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
to STROBE.
Press the Dorsal Light Power/Mode Switch again to turn the Dorsal Light
OFF.
Do the same with the Front Light Power/Mode Switch to control the Front
Light.
IR LIGHT MODE mW BATTERY LIFE
FRONT LIGHT OR
DORSAL LIGHT ONLY
HIGH 400 1.5 hours
LOW 150 2.5 hours
STROBE 400 2 hours
BOTH DRONT AND
DORSAL LIGHTS
HIGH N/A* N/A*
LOW 150 2 hours
STROBE 400 FRONT
150 DORSAL 1.5 hours
*Thermal protection circuit will automatically reduce the Dorsal Light to low mode when the Front Light is
on high mode. The battery life for this setup is 1 hour.
P/N 700-319

7
INSTALLATION
FLAT MOUNTING PAD / OPS-CORE MOUNT
Align bottom of D3060 with snap lock location on mount and snap D3060 light
in place. Spin them and tug to make sure they are properly attached (image
shown is Flat Mounting Pad).
BASE/MOLLE MOUNT
Align bottom of D3060 with the hole on the Base/MOLLE mount as shown.
Push each of the eight tabs in individually. Make sure that the light turns and
all the tabs have engaged.
TA B

8
PRODUCT DURABILITY
PRODUCT NAME & PART NUMBER:
D3060 Trade Compliant, 700-310-TC
D3060 IR Trade Compliant, 700-319
CARE/CLEANING
Your FoxFury product is a professional
tool. Regular maintenance and care of
your light will maximize performance for
you. As needed, wash your FoxFury
product using a soft washcloth, clean
water and a mild soap. Be sure that
both the Light Head and Power Pack
are reassembled securely before
washing. When done, pat dry with a
damp cloth.
WARNINGS
FoxFury, LLC is not responsible for the
incorrect use of any FoxFury Lighting
product.
Lights are strong enough to cause
damage to the human eye.
Do not stare into LEDs for long
periods of time or from a close
range (less than 2 ft / 0.6 m).
FoxFury, LLC is not responsible
for any injury or damage caused
during the use of this product.
Usage of this product must be
supervised by an adult when it is
being used by a minor.
Any FoxFury product should
be operated at speeds safe
enough to maneuver around
surrounding obstacles.
Do not use under the influence
of drugs or alcohol.
ONE YEAR WARRANTY
FoxFury, LLC (“FoxFury”) warrants
this product to be free from defects
in material for one year after
purchase. LiPo batteries have a one
year pro-rated or 300 re-charge cycle
pro-rated warranty, whichever the
user reaches first.
This warranty is given only to the
original end user of the accompanying
product. If you purchased a product
from someone other than an
authorized FoxFury reseller/distributor
or if the product was used, (including
but not limited to demo models, show
models or refurbished product by
someone other than FoxFury) prior
to your purchase, you are not the
Original Purchaser and the product
that you purchased is not covered by
this warranty. This warranty is VOID
if this Product has been altered or
modified in any way (including but not
limited to attempted warranty repair
without authorization from Foxfury
and/or alteration/removal of the
serial number). To expedite warranty
concerns, we encourage the end user
to register their FoxFury Product at
www.foxfury.com/pages/warranty-
registration.
WARRANTY AND OTHER
INFORMATION
3 M
3 M
IPX6

9
THIS IS THE ONLY WARRANTY,
EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES ARE
EXPRESSLY DISCLAIMED EXCEPT
WHERE SUCH LIMITATION IS
PROHIBITED BY LAW.
You may have other specific legal
rights which vary by jurisdiction. Go
to www.foxfury.com/pages/warranty
for a complete copy of the warranty.
Retain your receipt for proof of
purchase.
CONTACT FOXFURY
FoxFury, LLC
Oceanside, CA 92056 USA
Toll-Free: 844-FOXFURY
Te l : 760.945.4231
Fax: [phone]
Email: [e-mail]
Web: FoxFury.com
All FoxFury products are designed in
Oceanside, CA. All FoxFury products
are manufactured with the highest
quality USA and foreign parts.
Products are assembled in either
FoxFury’s controlled plant in Asia or
the USA, under strict quality control.
CALIFORNIA
PROPOSITION 65
This product can expose you to
chemicals including Lead and DEHP,
which are known to the State of
California to cause cancer and
birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.

FOXFURY.COM 04/2022