Foxtron DALIrsw User manual

User manual
document version 1.0 for FW from 1.0
DALIrsw
Universal DALI rotary switch
Infinite rotation and press
Control roups, addresses or
broadcast
Powered from the DALI bus
Led indicator
Optional backli ht
Installation in the KU68 box
Compatible with ABB cover lines*
*Covers are not included
1www.foxtron.eu

DALIrsw is a universal rotary knob for the DALI bus. The function is
adjustable by the DALIconfi pro ram, which is free to download on the
website www.foxtron. eu
Technical specification
Bus DALI / DALI2
Power consumption (from DALI) 3 mA
Wires cross section 0,5 mm2
In ress protection IP20
Ambient workin temperature 0 ÷ 50 °C
Storin temperature -10 ÷ 70 °C
Wei ht 50
Si nalin
data The flashin LED indicates that messa es are bein sent or received on
the bus
Clamp connection
designation description
DA/DA sběrnice DALI, dva vodiče vzájemně záměnné
Backili ht
The backli ht switch allows you to optionally turn on the soft backli ht of the DALIrsw
fin erboard to make the button easier to find at ni ht.
2www.foxtron.eu
DA DA
data
backli ht
ON OFF
DALIrsw

Function
The DALIrsw rotary knob is user-pro rammable. The settin s are made by the DALIconfi
pro ram, which is available for free download at www.foxtron. eu via the DALI232, DALInet
or DALI2net converter.
Extended functions - DALI2+
The DALIrsw rotary switch can directly control the li hts on the DALI bus. Dependin on
the settin s, the control can be broadcast, roup or directly to one address. One of two
modes Last value or Preset value with sli htly different functionality can be set for
control.
Press of the pushbutton
When the li hts are on, it switches them off.
When the li hts are off, it turns them on.
Mode Light level to which it is switched on
Last value The li hts are turned on to last level before switchin them off.
Preset value The li hts are turned on to the value that was stored with a lon press
Lon press
In Preset value mode, if the li hts are not currently off, the current li ht level value will be
stored and a short press will illuminate to this preset value.
In Last value mode or if the li hts are currently off, it will li ht up to the maximum value.
A lon press on the button is considered when holdin the button for more than 2
seconds.
Rotatin the switch
Rotatin to the ri ht adds bri htness to the li hts. When the li hts are off, they turn on.
Rotatin to the left reduces the bri htness of the li hts to the minimum bri htness. A short
press is required to switch them off.
3www.foxtron.eu

Settin s
parameter description Factory
setting
Enable operation Enables or disables lighting control Enable
Controlled
address
Address of controlled li hts
• Bcast – all li ht on the bus
• Group – roup of li hts
• Address – sin le li ht
Bcast
Control mode
Li ht control mode selection
• Last level – illumination to the last set value
• Preset level – illumination to preset level
Last level
Preset DAP level Preset li ht level to which it is turned on by a short press. 254
Min level For proper operation, it is necessary to set the value of the
minimum li htin level, which is set in the ballast. 85
Max level For proper operation, it is necessary to set the value of the
maximum li htin level, which is set in the headli hts. 254
4www.foxtron.eu

Dimmensions [in mm]
phone: [phone]
e-mail: [email protected]
web: www.foxtron.cz
5www.foxtron.eu
71
52
DA DA
data
backli ht
ON OFF
DALIrsw
71
20
16
6
11
29