foxunhd FX-SDI-104 User manual

Operating Instructions
www.foxunhd.com
FX-SDI-104
SD/HD/3G-SDI 1 to 4 Distribution Amplifier & Repeater
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
ABLE OF CONTENTS
Feature
Introduction
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Typical Application
Product Service
Warranty

Operating Instructions
www.foxunhd.com
Feature
Distributes 1 SDI input to 4 SDI outputs simultaneously
With Audio extraction(3.5mm stereo audio output)
Single unit can transmit up to 120m/390ft (Beldon 1694A)
Re-clocking function capability---unlimited repeater connection
Support SDI Standard :SD-SDI,HD-SDI, 3D-SDI
Data Rates: 270Mbps(SD-SDI), 1.485Gbps (HD-SDI), 2.97Gbps (3G-SDI)
Signal Type: SMPTE 292M, SMPTE 259M, SMPTE 424M
DC 5V~12V (Power consumption less than 2W)
Power consumption:2watts
Dimension (L×W×H):115.3x94.7x29mm
NOTICE
Our company reserve the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
INTRODUCTION
It is newest 1x4 3G SDI splitter&Repeater . It offers HD video solution for super market, shopping mall;
HDTV, STB, DVD and projector factory; data control center; conference rooms; education and training;
luxurious house; home theaters etc.
SPECIFICATIONS
Re-clocking Function
Yes
SDI Standards
SD-SDI, HD-SDI,3G-SDI
HD/SD-SDI Detection
Auto
Supported Protocols
SMPTE 259M
SMPTE 292M
SMPTE 424M
Data Rates
270Mbps(SD-SDI), 1.485Gbps (HD-SDI),
2.97Gbps (3G-SDI)

Operating Instructions
www.foxunhd.com
Video Support
480i@60hz, 720p@50/59.94/60hz,
1080i@50/59.94/60hz,
1080p@23.98/24/25/29.97/30/50/59.94/60hz
SDI Signal Type
SMPTE-292M, SMPTE-259M, SMPTE-424M
Output Impedance
75 ohms
Cable Equalization
HD-SDI up to 120m
SD-SDI up to 200m
Unlimited repeater connection
Audio Sampling rate
48Khz
Impedance
75 ohms
Input
1x BNC [SDI]
Output
4x BNC [SDI],3.5mm stereo audio jack
Power Adapter
5V 1A DC
Power Consumption
2W
Dimension(LxWxH)
115.3x94.7x29mm
Operating
Temperature
-5 to +65℃(+23 to +149℉)
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (no condensation)
Housing Material
Metal case
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
1) 1x4 SDI repeater
2) 5V 1ADC power adaptor
3) Operating Instructions.
Notes: Please confirm if the product and the accessories and all in duded, if not please contact with
the dealers.

Operating Instructions
www.foxunhd.com
PANEL DESCRIPTION
SDI-104
1) 3.5mm stereo audio jack
2) SDI input
3) Red indicator of power input
4) Green indicator of source status
5) DC 5V 1A
6) SDI outputs
CONNECT AND OPERATE
1) Connect a camera or other device equipped with SDI output to FX-SDI-104 input.
2) Connect devices equipped with SDI input (e.g monitors or video processors) to the FX-SDI-104 outputs.
3) Plug power adapter into power jack.
Note:A .Connect a camera or other device equipped with SDI output to FX-SDI-104input.
B.Connect devices equipped with SDI input (e.g monitors or video processors) to the FX-SDI-104outputs.

Operating Instructions
www.foxunhd.com
C.Plug power adapter into power jack.
Typical Application
1) Distribute one SDI input to 4 SDI output
2) Connect with FX-HSD1 and FX-SDH1
3)Repeater connection
Attention: 1) Insert/Extract cable gently.
2) Please don’t insert into or pull out HDMI Cable when power on. please connect Cable
only when power is off.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.
PRODUCT SERVICE

Operating Instructions
www.foxunhd.com
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes
may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit
is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company
(referred to as "the warrantor" ) will , for the length of the period indicated as below,
(Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"),
at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during
the warranty period. This Limited Warranty is extended only to the original purchaser and only covers
product purchased as new. A purchase receipt or other proof of original purchase date is required for
Limited Warranty service.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER
damages which occurred in shipment, or failures which are caused by products not supplied by

Operating Instructions
www.foxunhd.com
warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication,
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory
Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images,
data or other recorded content. The items listed are not exclusive, but are for illustration only.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
Table of contents
Other foxunhd Amplifier manuals