Franklin FX10 User manual

FX10 WiFi 6 Mesh Extender
i
FX10 WIFI 6
MASH EXTENDER
USER MANUAL
JEXtream AX1800
Franklin Wireless Corp

FX10 WiFi 6 Mesh Extender
ii
Table of Contents
Introduction .................................................................................................................................................3
Overview.......................................................................................................................................................4
Parts and Functions................................................................................................................................4
This Box Contains...................................................................................................................................5
WiFi 6 Mesh Extender Overview.............................................................................................................5
Wall Mount Cradle .................................................................................................................................6
Turn on the Device .................................................................................................................................6
LED Behaviors........................................................................................................................................7
Back Panel Button and Connector...........................................................................................................8
Link Your Device ..........................................................................................................................................9
Place your WiFi 6 Mesh Extender ...........................................................................................................9
Link your WiFi 6 Mesh Extender.............................................................................................................9
Setup Your Device ......................................................................................................................................12
Step1) Access your FX20 device’s Web UI.............................................................................................12
Step2) Check WiFi Mesh Controller ......................................................................................................12
Step3) Check Mesh Client List...............................................................................................................13
Step4) Monitor Mesh Extender Status ..................................................................................................13
Appendix ....................................................................................................................................................14
Troubleshooting...................................................................................................................................14
Specifications .......................................................................................................................................16
Warranty and Service...........................................................................................................................18
Customer Service .................................................................................................................................18
Trademarks and Copyright Information ...............................................................................................18
FCC Compliance ...................................................................................................................................19

FX10 WiFi 6 Mesh Extender
3
Introduction
The WiFi 6 Mesh Extender (model: FX10) will extend your wireless coverage along with the WiFi 6 router
(model: FX20) that will connect to your modem or gateway.
The WiFi 6 Extender connects to the WiFi 6 router and extends the WiFi signal throughout your whole home
mesh WiFi system. Basically, the WiFi 6 router is turned on the WiFi Mesh controller operation, it will allow
to connect of the WiFi 6 Mesh Extender.
This guide provides a brief introduction how to connect your WiFi 6 Mesh Extender to enable your whole
home WiFi mesh network.

FX10 WiFi 6 Mesh Extender
4
Overview
The following topics give you all the information you need to set up your router for the first time.
Parts and Functions
The WiFi 6 Mesh Extender (model: FX10) enables to extend your whole home mesh WiFi coverage along with
the better performance by ensuring more available bandwidth with less congestion for all connected devices
on network. With FX20’s WiFi 6 capacity, it allows more users and devices to connect to the network at the
same time without impacting speed or reliability.
This chapter contains the following sections:
•This Box Contains
•WiFi Mesh Extender Overview
•Wall Mount Cradle
•Turn on the Device
•LED Behaviors
•Back Panel Button and Connector
For more information about the topics covered in this manual, visit the support website at
https://www.jextream.net/support.

FX10 WiFi 6 Mesh Extender
5
This Box Contains
Your package contains the following items:
FX10 Mesh Extender
Cradle
QSG
Power Adapter
WiFi 6 Mesh Extender Overview
The following numbers on Front and Rear panels indicate interface detail:
(1) LINK Status LED
(2) Power Status LED
(3) MESH Status LED
(4) MESH LINK Button
(5) RESET Button
(6) RJ-45 LAN Port
(7) RJ-45 LAN Port
(8) Power IN

FX10 WiFi 6 Mesh Extender
6
Wall Mount Cradle
This FX10 with the Wall mount cradle by attaching the power adapter is designed to install your WiFi 6 Mesh
extender a snap and reduce cord clutter.
1. Mount the WiFi 6 Mesh extender on the Cradle’s holder.
2. Attach the Cord cable of the power adapter on the Cradle's back side.
3. Move it to any position you want as long as there is a socket.
Turn on the Device
Plug USB type C Power Adapter to device, then connect to wall. The device should automatically turn on.

FX10 WiFi 6 Mesh Extender
7
LED Behaviors
The following table describes the LED indicators that is located on the router front view.
LED
Description
LINK
•Solid white –The Mesh extender is synced with the Mesh controller (FX20 router)
and is working normally.
•Off –Unable to sync with the Mesh controller.
Mesh
•Solid white –The Mesh extender is ready to sync with the Mesh controller (FX20
Router).
•Blinking white –The Mesh extender is attempting to sync with the Mesh controller
once pressing the Mesh-Link button on the backside for 3 seconds.
•Solid red –The Mesh extender failed to sync with the Mesh controller. Move your
Mesh extender closer to the Mesh controller as your Mesh extender may place out of
range from your Mesh controller or make sure that the Mesh controller mode is
enabled on the router Web UI.
•Off –Power is not supplied
Power
•Solid white –The Mesh extender finished booting.
•Off –Power is not supplied.

FX10 WiFi 6 Mesh Extender
8
Back Panel Button and Connector
The following table describes the hardware features on the router back view.
Button
Description
DC-IN
USB Type C Power Connector
Mesh-Link
Pressing the Mesh-Link button for 3 seconds, this Mesh LED is blinking and attempting to
sync with the Mesh controller (FX20 Router). The blinking during this process stays on up
to 6 minutes.
RST (RESET)
Pressing the RST button for 5 seconds, your device will restart.
Pressing the RST button at least 10 seconds, your device will restore the factory settings.

FX10 WiFi 6 Mesh Extender
9
Link Your Device
The following topics give you all the information you need to set up your device and wireless service for the
first time.
Place your WiFi 6 Mesh Extender
Your Mesh extender must be within range of your Mesh controller’s WiFi coverage in order to sync with it.
Indicates the Mesh LED color to RED where to place your Mesh extender in the wickedness WiFi signal. Closer
it to your Mesh controller.
If you own more than one Mesh extender, your Mesh controller can sync with each other. Place your Mesh
extender within range of each other.
Link your WiFi 6 Mesh Extender
Your FX20 router is preset to the Mesh controller mode by default, and your Mesh extender (FX10) is ready to
find and sync with your Mesh controller.

FX10 WiFi 6 Mesh Extender
10
1. Place your Mesh extender closer to your Mesh controller.
For more information, see Place your WiFi 6 Mesh Extender section.
2. Check the WiFi Mesh Controller mode on your FX20 router.
The router
Once the Mesh controller mode is enabled, it will turn on Amber color.
Otherwise, please turns on the Mesh controller mode by going through your router’s Web UI where
the WiFi Mesh menu in the Wireless is placed.
For more information, see Wireless > WiFi Mesh section in the FX20 WiFi 6 User Guide.
3. Connect your Mesh extender to a power source.
The Power LED turns on white and the Mesh LED turns on white.
If the Mesh LED pules white, your Mesh extender will try to find and sync to your Mesh controller
automatically.
For more information, see Turn on the Device section.
4. Press the WPS button on your FX20 router for 3 seconds.
The WPS LED pulse Amber until your Mesh extender will be successfully synced.
This process time will have up to 5 minutes for syncing your Mesh extender.
5. Press the Mesh-Link button on your Mesh extender for 3 seconds.
Within 5 minutes, press the Mesh-Link button on the back of your mesh extender. It will attempt to
sync to your Mesh controller.