FREEFORCE ULTRALITE 1800 User manual


Freeforce Ultralite 1800 79” PV Solar Charge Cable
(7909 to MC4)
User Manual
47” AC Wall Charger & 47”
AC Input Charging Cable

HOW TO CHARGE YOUR PRODUCT
Charge with solar power
Insert the solar charging cable or AC adapter into the input port of the product. The
display screen will light up and charging power will be displayed. Product can be
charged in both on and o position, but it is advisable to begin charging with the
product o so you can see the charging has started when the charging indicator
light turns on.
AC CHARGER
PV INPUT PORT
PV Solar
Charge Cable
MASTER
POWER
BUTTON
AC ADAPTOR
& CORD
RECHARING TIMES
Solar Charger
8 - 10 hours
(In case of
max. 500W
solar panel)
Wall Charger
10 - 12 hours
Insert one end of the adapter into wall outlet and insert the other end to the input
port of the product. As the product charges you can monitor the battery status by
checking the battery icon on the LCD screen. When the battery is fully charged, it
will stop charging itself automatically.
BEFORE YOU CHARGE: Turn o generator, connect PV (or charger) to charge and
activate PV charge function. The rst column on screen will light up and show input
power. Now the generator is in charging state and cannot support AC and DC
functions. To open AC and DC functions, press the master power button for more
than 1 second to turn on the generator, the screen will light up when the generator
is turned on. After start-up, connect PV (or charger) to start charging, the screen
will show input power wattage and now you can open AC and DC functions.
NNOTICE:
1. If Master Power Button is not turned on, AC button and DC button are in o
status, no AC output and DC output.
2. If Master Power Button is turned on, AC button and DC button are still in o
status, no AC output and DC output. You need to turn on AC power button and DC
power button separately.
Charge with AC power

MASTER POWER BUTTON
DC POWER BUTTON
LED INDICATOR LIGHTS
5VUSB OUTPUT PORTS
TYPEC PD OUTPUT PORT
DISPLAY SCREEN
AC CHARGERPV INPUT PORT
12V CAR OUTLET SOCKET
AC 100120V
OUTLETS
FRONT OF PRODUCT BACK OF PRODUCT
AC POWER BUTTON

LCD DISPLAY
INPUT
DC ONOFF
AC ONOFF
W
W
W
CHARGING POWER
DC ONOFF STATUS
DC OUTPUT POWER
AC ONOFF STATUS
AC OUTPUT POWER
BATTERY STATUS INDICATOR
If the product malfunctions, error codes will be displayed on screen.
When product is powered on, but not in use, the product will turn o by itself after 60seconds of inactivity.
When the product is powered on and the AC/DC output is turned on, the backlight would turn o by itself after a
period of inactivity. To turn on the backlight again, press any button.
NOTE:
1.
2.
3.
Icon ashes while being charged. When the battery is fully charged,
the icon will stop ashing and all 5 segments will be lled.

BACK OF PRODUCT
FRONT OF PRODUCT
AC 100120V OUTLETS
MASTER POWER BUTTON
AC POWER BUTTON
Turning the Product On/O
Press and hold the master power button about 2 seconds
to turn the product o or on. The LED indicator light and
the display screen will light up or turn o accordingly.
AC Output
NOTE: Check to make sure the product is turned on.
Otherwise, you cannot turn on AC output.
1. Turn on AC output: press and hold the AC power button
to turn on the product. The corresponding LED indicator
light would light up and the display screen would show
“AC ON.”
2. Turn o AC output: press and hold the AC power button
to turn o the product. The LED indicator light would turn
o and the display screen would show “AC OFF”

, Phone
Turning the Product On/O
Press and hold the master power button about 2 seconds
to turn the product o or on. The LED indicator light and
the display screen will light up or turn o accordingly.
AC Output
NOTE: Check to make sure the product is turned on.
Otherwise, you cannot turn on DC output.
1. Turn on AC output: press and hold the DC power button
to turn on the product. The corresponding LED indicator
light would light up and the display screen would show
“DC ON “DC ON.”
2. Turn o AC output: press and hold the DC power button
to turn o the product. The LED indicator light would turn
o and the display screen would show “DC OFF”
12V CAR OUTLET
MASTER POWER BUTTON
5VUSB PORTS
TYPEC PORT
DC POWER BUTTON

INVERTER OUTPUT
12V9A
CAR
OUTLET
OUTPUT
5V USB
OUTPUT
TYPEC PD
OUTPUT
100-120Vac, 220-240Vac
50/60Hz
1000W
1
<5%
1000W ≤Load<1200W @2Min, 1200W≤Load @1s
<20W<20W
88%(100-120Vac), 90%(220-240Vac)
12.2V(±1V)
9A
5V±0.3V
3A
PD Protocol
5-20V(±5%) (5V 5-20V(±5%) (5V by default)
(5V/9V/12V/15V)3A(±0.3A), 20V/2.25A(±0.2A)
OUTPUT SPECIFICATIONS
Continuous Output Voltage
Rated Frequency
Continuous Output Power
Power Factor
THDV@0.7R (under nominal voltage)
OOverload protection
Power Loss (No Load & Turned o)
Max Eciency (>70% Load)
Continuous Output Voltage
Continuous Output Current
Output Voltage Range
Max Output Current
NoNote: The maximum output of a single USB port is 3A. The maximum output of 2 USB ports is 3A (top and down).
Supported Fast Charge
Output Voltage Range
Continuous Output Voltage/Current


Before using this product, you should read the instructions
carefully and be aware of the precautions. Warranty does not
cover damage caused by failure to follow instructions.\
Check the power at each output port. For example, the power
at AC output port is provided by the built-in inverter of the
product, whose maximum continuous output power is 1000W.
This means that it is only suitable for electronic device whose
required power is no more than 1000W.
The product is equipped with high-voltage electricity. It is
expected to use with caution in order to avoid any accidents.
This product is not permitted on aircrafts.
Use the original or certied charger and cables, charge it by the
constant current and voltage, and prohibit reverse charging.
Please do not put this product in contact with re, liquids, and
direct sunlight. Avoid exposing the product to rain or using the
product in humid environment.
In case of re, use dry powder re extinguishers for this
product. Do not use water re extinguisher, which may cause
electric shock.
Do not install the product near heat sources, such as electric
furnace and heaters. Place and store the product in a well-
ventilated place.
PRECAUTIONS
Cold weather can inuence battery capacity. In sub-zero
temperature (<0°C), you may be able to discharge the product,
but you should not charge it. Otherwise, the battery of the
product would be greatly damaged and the capacity may
not ever be recovered. When the product is charged at a
temperature below 0°C, it will shut o and stop charging itself
automatically. The product will reboot and start charging
itself when the temperature rise to above 10°C. If the product
is discharged at a temperature of -20°C, it will turn o. The
product will reboot and turn on output when the temperature
rise to above -10°C.
Avoid storing this product near metal objects like coins, jewelry,
and keys to prevent short-circuiting.
Press the “RESET” button in case of temporary malfunctioning.
The product will be reset and turned to normal conditions.
It’s normal for this product to generate heat when it is being
charged.
Make sure that the air inlet/outlet is not blocked.
This product is durable, has built-in lithium-ion batteries
with a large capacity, and features a non-memory eect.
(Recommended storage temperature: 50°F ~95°F)
Do not disassemble the product. If the generator needs
maintenance, please contact the local designated system

Proper use helps to extend the life of this product. Please operate strictly according to the user
manual and under the prescribed conditions. This product is intended for consumer use only.
Warranty is valid for 1 year from the date of purchase.
@freeforcepower
WARRANTY
INFORMATION
CONTACT US
During the warranty period, we will repair or replace the product at no
cost, unless the damage is caused by:
• Improper use or handling of the product (other than consumer use,
rough use/dropping, improper charging)
• Disasters such as ood, re or earthquake
• Unauthorized disassembling, repair, or modication of the product
hi@freeforcepower.com
888-984-2762
www.freeforcepower.com

ULTRALITE 1800
POWERFUL PORTABLE POWER STATION
Table of contents
Other FREEFORCE Portable Generator manuals
Popular Portable Generator manuals by other brands

PeakTech
PeakTech 4120 Series Operation manual

Dometic
Dometic T4000 H/HG-LP Installation and operating manual

Westerbeke
Westerbeke 9.5 MCGA 60 Hz Operator's manual

Abicor Binzel
Abicor Binzel xFUME POWER 250 Original operating instructions

Kenwood
Kenwood CG-931 instruction manual

Sony
Sony XV-D1000 Service manual

Honeywell
Honeywell HW4000 - Portable Generator NOT owner's manual

Kohler
Kohler COM7.5 Service manual

Phono Solar
Phono Solar PowerHub 1800 installation guide

Millenium Signatures
Millenium Signatures MS-510 instruction manual

Champion Power Equipment
Champion Power Equipment 100331 owner's manual

Hysolis
Hysolis Split Phase SPS6K user manual