FREERIDER FR1 User manual

Freedom Reliability Innovation
FR1
USER'S INSTRUCTION MANUAL
USER'S INSTRUCTION MANUAL

1
FOREWORD
Please read and follow all instructions in this User's Instruction Manual before attempting to
operate your scooter for the rst time. If there is anything in this manual that you DO NOT
understand, or if you require additional assistance for setting it up, contact your authorized
dealer.
Using your product safely depends upon your diligence in following the warnings, cautions
and instructions in this manual.
A full technical specication can be found at the rear of this manual.
Using your scooter safely also depends upon your good judgment and / or common sense, as
well as that of your Provider, Caregiver or Health Professional.
Always think safety!

2
CONTENTS
Introduction .............................................................................................................. 3
Purpose Of Your Scooter ......................................................................................... 3
Rules For Safe Use .................................................................................................. 4
Getting To Know Your Scooter ................................................................................. 6
Operating Your Scooter ............................................................................................ 7
Freewheeling Your Scooter ..................................................................................... 14
Safety Instructions & Warning ................................................................................. 14
Safety Warning & Instruction Labels ....................................................................... 16
Learning To Get About ............................................................................................ 16
Care & Maintenance ............................................................................................... 18
Batteries And Battery Charging ............................................................................... 20
Basic Fault Finding .................................................................................................. 22
Technical Specification ............................................................................................ 25
Classification ........................................................................................................... 27
Optional Accessories ............................................................................................... 28
Guarantee Terms .................................................................................................... 29
Service History ........................................................................................................ 30

INTRODUCTION
Congratulations on the purchase of your scooter. Please read this User's Instruction Manual
carefully before you attempt to operate your scooter. Your User's Instruction Manual will
assist you to get the most from your machine.
This manual contains important information regarding the safe operation and maintenance of
your scooter.
If you have any queries concerning operation or maintenance, consult your authorized dealer.
Please keep in mind that the operator of the scooter is responsible for hazards occurring
to other people or their property.
Your scooter has numerous features not found on other power scooters. With proper care and
maintenance, you will enjoy many years of dependable service.
Please remember that when it comes to service and repairs, your authorized dealer knows
your scooter best.
PURPOSE OF YOUR SCOOTER
The scooter provides transportation for an elderly or disabled person. It can be used in a
variety of indoor and outdoor settings.
The intended user should possess some degree of ability with the use of both arms
and hands, reasonable balance and good eyesight, and a degree of spatial awareness.
The user should have received training in the use of the product, preferably in their normal
environment.
Your scooter should not be used in torrential rain or deep snow, on loose slippery
surfaces and slopes or on wet grass etc., which could become a danger to the rider,
or other road users.
DO NOT drive your scooter if you are under the inuence of alcohol, drugs or medication
that may affect your ability. If you are in doubt, consult your doctor.
3

RULE FOR SAFE USE
These symbols below are used in this User's Instruction manual to identify warnings and
cautions. It is very important for you to read and understand them.
Warning: Failure to note the warnings in this user's manual may result in personal injury.
Your scooter is a powerful machine. Please read all of the instructions in this manual before
operating your scooter. Follow notes carefully to ensure safety at all times.
ALWAYS make certain your machine is fully charged and in full working order before
starting your journey.
Weight Limitations:
Your scooter is rated for a maximum weight capacity of 400 lbs (182 kg).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
DO NOT ride your scooter without reading this instruction manual. Also read all of the
safety instructions and warning at the start of this manual.
ONLY drive your scooter if your health condition will allow you to be safe.
DO NOT exceed the maximum safe gradient outlined for your vehicle.
DO NOT carry passengers or exceed the maximum carrying weight.
DO NOT reverse your scooter onto uneven inclines or surfaces. Be cautious when
traversing slopes.
DO NOT drive your scooter in a conned space unless the speed adjustment dial is set
low.
DO NOT turn suddenly at full speed, especially on uneven or sloping ground.
DO NOT drive your scooter where you cannot safely or legally walk.
DO NOT drive your scooter unless the seat is locked into the driving position.
DO NOT drive your scooter over deep, soft terrain (eg. soft earth, deep grass, loose
gravel, snow).
DO NOT drive when under the inuence of alcohol or certain drugs which may impair
your safety.
DO NOT climb or descend curbs that exceed the maximum dimension detailed under
technical specication of this manual. DO NOT turn when negotiating curbs.
ALWAYS approach obstacles at low speed.
4

ALWAYS approach obstacles straight.
ALWAYS keep your feet on the vehicle when driving.
ALWAYS proceed carefully while riding, especially as you approach the downgrade of
a ramp.
ALWAYS reduce speed when descending inclines.
ALWAYS avoid uneven surfaces.
ALWAYS consult your physician or a therapist if in doubt about your ability to operate a
scooter.
Transport - DO NOT sit on your scooter while it is in a moving vehicle. ALWAYS strap
down your scooter then transfer to the vehicle seat.
The batteries tted to your scooter are maintenance free and DO NOT require topping
up with distilled water.
DO NOT drive your scooter through deep water or clean with a high pressure hose.
DO NOT drive your scooter through sea sand or sea water, this is very corrosive.
ALWAYS wash salt splashing from the metal parts of your scooter with hot soapy water
as soon as possible.
DO NOT drive on motorways, highways (i.e. those with a speed limit of over 50mph),
cycle lanes or in bus lanes.
ALWAYS switch your lights on at night or in poor visibility. Wear reective clothing.
If unintended movement or brake release occurs, turn the scooter OFF as soon as it is
safe.
Report all incidents of unintended movement or brake release to the scooter local dealer,
and note whether there is a source of EMI nearby.
Please remember you are a motorized pedestrian and must observe all rules and
regulations of other pedestrians wherever possible. Your scooter has been designed for
use on most roads; drive with due care and attention. Reading the "Safety instructions
and warning" section of this manual.
Please have a safe journey
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
5

GETTING TO KNOW YOUR SCOOTER
Your scooter is delivered fully assembled, fitting the two batteries and the seat assembly
together with some minor adjustments are detailed on the following pages, under "Operating
your scooter". A full technical specication for your scooter can be found at the rear of this
manual.
A great deal of thought has gone into the design of your four wheeled vehicle which will
allow you to negotiate obstacles found in conned shopping areas. Also, the four wheels will
give you added stability on uneven surface. This is just one of the features you will nd on
your scooter.
Others are:
COMFORT - The contoured seat giving you day-long comfort. A fully proportional speed-
controller with a speed restriction facility allows you a smooth, safe jerk-free ride.
Caution: DO NOT switch "off" the on/off power key when you are moving; this will
automatically apply the motor parking brake suddenly and could place you in a dangerous
situation. Your scooter is tted with anti-tipping wheels. DO NOT remove these anti-tipping
wheels, they are an important part of the scooter design provided specically for your safety.
Steering Handbars
Driving Mirror
LCD Console
Off-board Charger Port
USB 5V Power Outlet
Mirror Bracket
Front LED Lights
Direction Indicator Lights
Daytime Running Lights
Front And Rear Bumpers
Side And Rear Reectors
Floor Mat
13"Aluminum Alloy Sporty Wheels
3 Functions In One Rear Lighting
(Rear Light/Indicators/Auto Brake
Light)
Main Circuit Breaker
Mudguards For All Wheels
Adjustable Angle Seat With Backrest
→
●
4
→
→
→
→
→
→
→
●
2
→
●
1
→
●
3
●
6
●
8
→
●
9
→
→
●
12
→
→
●
15
→
●
11
●
13
●
10
→
●
16
→
●
5
→
●
7
●
17
●
14
●
11
●
10
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
6

OPERATING YOUR SCOOTER
Before setting out on your scooter you need to make sure that your seat is in the
correct driving position. The seat has three basic adjustments to assist your comfort.
1. MirrorAssemble:
2. Seat Lock Lever:
This allows the seat to swivel through 360 degree. Pull up
the seat lock lever fully to release the seat allowing rotation.
Release lever to lock the seat into the desired position.
Caution: The seat locking lever must be locked in place and
be lifted up fully when rotating the seat, failure to observe
this may result in unnecessary wear of the seat post.
Removing seat from Scooter:
Note: When you want to remove the seat you must go
through a special lifting point on the mounting post. This
lifted point is 90 degree counting from the horizontal
direction.
(1) Pull up seat lock lever fully.
(2) In the meantime rotate the seat to 90 degree from
the straight ahead position.(either left or right side)
(3) Lift up and remove the seat carefully.
14mm
wrench
(Seat Lock Lever)
3. Seat Back Adjusted:
(1) Pulling up on the seat back adjustment lever,
lean forward or backward to adjust the seat back.
(2) Release the seat back adjustment lever once the
seat is in a comfortable riding position.
Note: The seat back angle can be adjust to a maximum
angle of 102.8 degree.
7
MirrorAssemble
Seat Lock
Seat Back Adjusted

4. Armrest Width Adjustment:
On each side at the rear of the seat you will nd
a large black knob. By simply loosening this
knob you are able to slide the armrests in or out
to whatever width you desire. Re-tighten the
knobs fully.
Warning: DO NOT drive your scooter with
the arms removed or in the raised position.
5. Armrest Angle Adjustment:
The armrest angle can be adjusted individually
to suit your needs. To make adjustments to the
armrest angle you will need a 13mm box socket
and 6 mm hex socket (not provided).
Lift the arm upwards, you will note the adjusting bolt. First loosen the locking nut, rotate the
bolt in or out until the required angle is found, lower the arm and check the angle for comfort;
re-adjust as necessary.
Finally the tighten locking nut.
6. Seat Height Adjustment:
You may need to alter the seat height setting at
a later date, please follow these instructions.
(1) Remove your seat from the scooter by
lifting the seat.
(2) With the aid of a 16mm wrench (not
supplied) loosen the 10mm seat clamp
fixing bolt from side of seat post.
Remove the 10mm fixing bolt and
reposition the bolt into one of the four
preferred location holes of the seat
mounting tube.
(3) Re-tighten the 10mm xing screw.
(4) Ret the seat onto your scooter.
wrench
8

10. Tiller Height Adjustable:
The tiller of your scooter is designed to
allow you to adjust in different height in a
comfortable driving position. The handlebar
lock is operated by a 10 mm hexagon screw
positioned on the central of the handlebar.
7. Seat Slide:
Located on the right front side of the seat. The lever allows
you to adjust your seat forwards and backwards when sitting
on the seat. Simply pull up the lever and move in the desired
position backward by pushing or forward by hitching. As
soon as the lever is released, the seat will lock into the new
position.
Caution: Check the seat has fully locked by hitching
backwards and forwards.
8. Headrest HeightAdjustment:
The headrest can be adjusted for height, giving you
more back support if you are tall, by operating the
small latch cushion up or push down for the most
comfortable position.
9. HandlebarAdjustment:
The handlebar of your scooter is designed to allow you to
position it in a comfortable driving position. It can be locked
into numerous positions or unlocked to move freely for
transportation.
The handlebar lock is operated by a black lever positioned on the right hand side of the
handlebar. To release the handlebar from a locked position pull the black lever upwards, the
handlebar will now move freely, but under mild tension.
Put 8 mm hex wrench into the hole.
Counterclockwise turn the tool to relax screw and
improves the top console to position.
Clockwise turn the tool to lock screw.
(1)
(2)
(3)
9
1. 2.
3.

11. Control Features:
Your controls are located on the handlebar console they are:
10

12. LCD Control Console:
Sign Function Description
1On-Off Power Switch
Will activate controller system
and control panel
2Batteries condition indicator
Bars will illuminate to show the
level of charge in your batteries
3Distance/Temperature
/Time indicator
Will illuminate when power
on and they also exhibit in
different value
4Direction indicator
Will illuminate when the
direction switch is activated
press to terminate.
5Status light
The green light will illuminate
at a constant rate when key
switch on and will flash for
identify faults
6Half speed indicator
Will illuminate when the half
switch is activated
7
Switch between Centigrade and
Fahrenheit
l. Short press for switching
between Centigrade and
Fahrenheit.
11

Sign Function Description
8
Switch between Km and Miles
l. Short press for switching
between kilometer and mile.
2. Program Setting Mode for
Speed and Loadstone setting
, please contact your
authorized dealer for
adjustment.
9
Reset the distance(range)
1.Short press to switch
between ODO/TRIP.
2. Press sustained to reset
TRIP.
ODO = Odometer
= Total distance
TRD = Trip distance
10
Hour setting
1.Short press to increase
hours value.
2.Press sustained H to
increase hour value
sustainability.
3. Will return normal (drive)
mode after 3 sec. without
setting.
11
Minute setting
1. Short press to decrease
mlnute value.
2.Press sustalned M to
decrease minute value
sustainability.
3. Will return normal (drive)
mode after 3 sec. without
setting.
12 Left and right horn button
Press to sound a warning to other
road users.
13 Speed Adjustment Dial Allow to pre-select your desired
top speed.
14 Front/Rear light switch
Simply push on and off to
Front and rear light
12

13. Forward, Reverse Control Lever (Wig wag):
Your speed for forward and reverse motion and braking is controlled here.
The right thumb lever moves your scooter in a forwards direction and also controls the rate of
speed by the proportional amount of pressure applied.
The left thumb lever moves the scooter in a reverse direction and controls the rate of speed
by the pressure applied . The lever when released will return itself to the neutral position, and
you will gently stop. You will note that you can obtain the reverse of this procedure by pulling
the levers backwards with your thumb.
14. Emergency Brake:
Emergency brake lever located on your steering handlebars, it will operate two brake
mechanisms in two front wheels in the meantime when you grab the brake lever. Brake force
can be adjusted by tightening the screw beside brake drums.
Forward Reverse
(1) Step on the brake lever. (2) The scooter in braked on the condition
that both of the brakes are stepped.
(3) Release the lever lets scooter can continue
to use.
(4) Please exercise braking system until it
procient let you in dirving safety.
13

FREEWHEELING YOUR SCOOTER
If for reasons of convenience, or you require to push your scooter for a short distance, the
drive system can be put into 'freewheel mode'. This will allow your scooter to roll freely.
1. Freewheel Procedure:
The freewheel device is a red lever located at the rear right hand side of your scooter.
To freewheel your scooter rst switch off the power switch located on the scooter’s control
console.
Pull up the disengage lever until a distinct click is felt. You can now push your scooter with
ease.
Please note, in this mode with the power switch in the off position, the braking safety system
is automatically activated when the scooter is pushed quicker than walking speed, this is an
automatic 'run away' safety checking system, it also reduces the risk of casual theft.
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFENCE (EMI/RFI)
Electromagnetic and Radio Frequency Interference can come from mobile phone, radio
transmitters etc. In some cases, these waves can cause damage to control system. Your scooter
has an immunity to EMI, the higher the immunity level, the greater the protection against
EMI.
Your scooter has been tested and passed at the immunity level of 20 V/M.
Warning: Additional of accessories or components to your scooter can increase the
susceptibility to EMI. DO NOT modify scooter in any way not authorized.
1. Safety Check:
We recommend that you perform a safety check before each use to make certain your scooter
operates smoothly and safely.
SAFETY INSTRUCTIONS & WARNING
14

Warning: DO NOT carry passengers on your scooter. Your scooter is designed for a single
occupant which complies with legal requirements for pavement vehicles.
Carrying passengers on your scooter may result in personal injury and/or property damage.
We will not be held responsible for injuries and/or property damage resulting from failure to
observe these weight limitations. Please also remember when carrying heavy objects that this
will increase your total weight and may make your scooter unstable.
2. Inclines:
More and more modern buildings are designed with disability access in mind.
Ramps have specified percentage of inclination, designed for easy and safe access. Some
ramps may have turning switchbacks (180 degree turns) that require you to have good
cornering skills on your scooter.
Warning: Never drive down an incline at full speed. When climbing an incline, try to keep
your scooter moving, if you must stop, start up again slowly and then accelerate smoothly
with caution. Avoid sudden stop starts, lean forward towards your handlebars to increase
stability and prevent rearward tipping.
Warning: When climbing an incline, DO NOT zig-zag or drive at an angle up the face of the
incline. Drive your scooter smoothly up the incline without stopping, this greatly reduces the
possibility of a tip or fall.
6 degree maximum incline
(1)
(2)
(3)
(4)
(5)
Check tire ination, maintain at 40 p.s.i.
Check all battery connections, make certain they are serviceable and not corroded.
Check front basket is tted correctly.
Check batteries have been fully charged.
Check operation of brakes.
Take a wide arc with your scooter's front wheel around tight corners, your rear wheels
will follow preventing you from cutting the corner short and bumping or getting hung up
on raised currbs.
When descending an incline keep your speed adjustment set to the slowest speed setting
to ensure a safely controlled descent and driving in a forward direction ONLY. If your
scooter descent is quicker than you anticipated allow the scooter to completely stop, then
progress at a slower speed setting.
(1)
(2)
15

1. Basic Driving:
Make certain you are comfortably seated on your scooter and both armrests are down. Ensure
that the "Speed Adjustment Dial" is turned to minimum for your rst drive. When you have
become more condent you can increase the setting to a higher speed. Push the right "Thumb
Lever Control" as described earlier. You will very gently move forwards. Release the lever,
and you will gently stop. Practice these two basic functions until you get used to them.
Steering the scooter is easy and logical by turning the handlebars in the direction you wish to
maneuver.
2. Incline Control:
When you approach an incline, it is best to lean forward. This moves the center of gravity
of your scooter towards the front of the scooter for improved stability. When going down
an incline, keep your speed slow. This will keep you in a safely controlled descent. It is best
to lean backwards, this moves the centre of gravity of your scooter towards the rear of the
scooter for improved stability. If you wish to stop completely, release the control lever, and
you will come to a gentle stop, avoid sudden stop starts.
The following labels are positioned on your scooter, they communicate important
warnings or instructions regarding the safe operation of your scooter. Please
familiarize yourself with their location.
SAFETY WARNING & INSTRUCTION LABELS
LEARNING TO GET ABOUT
16

Control over stationary obstacles
Stationery obstacle (steps, curbs etc.) must be avoided where possible. Proceed with extreme
caution when driving near raise surfaces, unprotected ledges and/or drop offs such as curbs,
porches, stairs etc.
Most new pavements have wheelchair access ramps at intersections, use these at all times.
Plan your route where possible to avoid poor and uneven surfaces. DO NOT attempt to ride
up or down curbs as you may ground your scooter and damage it's construction.
Normal driving position Increased Stability driving position
3. Lock the Wheels:
Your scooter has two mechanism to help locking the wheels. The first, emergency
brake lever located on your steering handlebars. It will operate two brake mechanisms
in two front wheels in the meantime when you grab the brake lever. Brake force can
be adjusted by tightening the screw beside brake drums. The second, Automatically
Braking System, the braking system on your scooter is an electronic regenerative
system on the rear-wheels. The brakes automatically apply when the levers are
released(returned to neutral position).
Caution: Automatically Braking System The braking system on the Freerider FR1 is
an electronic regenerative system on the rear-wheels.
The brakes automatically apply when the levers are released (returned to neutral
position). Braking distance on a at surface is approximately 8.73 feet in the forward
direction and is approximately 8.83 feet in the reverse direction. The travel distance
will vary based on the terrain travelled and the weight of the rider. The scooter is not
recommended for use in soft or sandy soil, in long grass, on uneven surfaces, or on
wet/icy pavement.
Correct Incorrect
17

Your scooter like any other electro-mechanical machine will benet from regular servicing
by your dealer. You too, can help keep your scooter in tip-top condition by following a simple
guide to home maintenance.
Note: ONLY competent people should carry out service work.
1. SEAT UPHOLSTERY:
A damp cloth and a little soapy water will keep your seat, backrest and arms looking smart.
DO NOT use abrasive cleaners as this will damage the coating. Upholstery can be damaged
by chemical cleaners.
The coating material can also degrade over a period of time due to contamination by natural
oils in the hair and skin or from medicated power products. Ultra-violet light can also reduce
the life of the upholstery coating material. This is a normal ageing process and cannot be
guaranteed.
2. BODYWORK:
The painted bodywork on your scooter can be lightly washed with clean soapy water. DO
NOT use abrasive cleaners or strong detergents. This could fade the color; shampoo for
automobile works well. Remove salt contact as this is very corrosive to bright metal parts.
Caution: DO NOT hose down your scooter with a powerful cleaner. Water could be forced
into the electronics and cause permanent damage. On the painted nish, be cautious not to
wash with a dirty cloth as this could scratch the paint nish. Auto polish can be used to keep
the paintwork and bright chrome parts in pristine condition.
The metal framework of your scooter should be cleaned twice a year and any paintwork
damaged should be treated to prevent further attack from the elements. Wash regularly if
contact is made with road or sea salt, this is very corrosive.
DO NOT store your scooter in damp conditions. This may affect the electronics if left for
very long periods of time. Moisture, if left unattended can cause deterioration on metal work,
protect with proprietary cleaners.
3. ELECTRONICS:
Servicing of the drive electronics and charger should ONLY be carried out by your local
service dealer. These units are sealed and should not be opened.
4. BROKEN SEALS WILLINVALIDATE YOUR GUARANTEE:
DO NOT operate your scooter in exceptional weather conditions, ie. very heavy rain or wind.
Cover your machine up if it is to be left unattended and outside for a long period of time.
DO NOT drive through deep water with your scooter. This could damage the electronic speed
controller. Sea and road salts are very corrosive and should be neutralized quickly.
5. MOTOR:
The motor on your scooter is fitted with four long-life brushes. The brushes should be
inspected for wear every 12 months or more frequently if you use you scooter daily for long
periods.
The brushes should be changed when they have worn down to approximately 8 mm in length.
CARE & MAINTENANCE
18

6. DRIVE TRANSMISSION LUBRICATION:
This unit is factory lled and will not normally need additional lubrication.
Note: Our scooter transmission is lled with a special lubricant. DO NOT attempt to force
grease into the transmission as this will contaminate the original lubrication and will
invalidate your guarantee.
Caution: Take care when handling the transmission, keep well away from clothing. It is
normal to nd a light lm of lubrication around this part.
7. MOTOR BRAKES:
Safety Note: For your own safety, we recommend that you check the function of your scooter
brakes prior to a journey.
If the motor brake is functioning correctly and the drive is engaged you will not be able to
push your machine when it is switched off. Or switched on with the speed control lever in the
'zero speed', central position.
Warning: If your machine can be pushed as described above, the motor brake could be faulty.
Please DO NOT use, contact your local distributor.
Note: Check the Freewheeling Instructions of this manual.
8. DRIVING BRAKE:
Warning: When you drive your scooter and you let go of the speed control lever your scooter
should reduce speed very quickly. If you notice a change in the normal slowing/braking
condition of your scooter and it does not slow down quickly, please DO NOT use your
machine, contact your dealer.
9. MANUAL EMERGENCY BRAKE:
The manually operated 'Emergency Brake' is designed to be operated ONLY in the case of
mechanical or electronic failure to the motor and driving brakes, previously mentioned.
Caution: On no account operate this brake in conjunction with the electronic motor brakes.
Failure to observe this instruction may cause damage or premature wear to the motor and
transmission system. The manual brake system can be adjusted for wear to the braking
material by adjusting the operating cable length adjustment nut.
Warning: Brake adjustment should ONLY be carried out by service dealer, failure to observe
this warning could put the brakes in an unbalanced state and may cause damage to you or
your scooter.
10. TIRES:
Check the condition of your tires regularly. Look for signs of wear, cuts and foreign objects
lodged in the tread. Maintain the tire pressures at all times; failure to comply with this can
lead to poor performance of your machine and could make your machine unsafe and/or
unstable. Tires should be replaced when the tread is worn to 0.5mm.
19