FREEWAY MT300-13T User manual
INTRODUCTION
Thank you for acquiring the Freeway Med-Tech MT300-13T Medical Grade Tablet. Featuring a slim, robust
enclosure, the MT300-13T with a 13.3” TFT display is powered by the Intel® processor, offering optimal
combinations of performance and power savings.
The MT300-13T is available with Microsoft® Windows® operating system. Each software operating system
features web browser, client/ server computing software, media player, accessories, and applications support.
*If your MT300-13T contains Barcode Scanner or Front/Back Camera modules, please refer to the Tablet
Modules Basic Operation Guide for detailed operation.
BASIC
OPERATION
GUIDE
v1.0 0722freewaymedtech.com
Caution: Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion. Leaving a battery in an extremely
high temperature surrounding environment that can result in an explosion or the
leakage of ammable liquid or gas.
MT300-13T
Medical Grade Tablet
Package contents
1 MT300-13T Battery Powered Medical Grade Tablet
1 MT300 Li-ion battery
1 Medical Grade AC-DC power adapter
1 Basic Operation Guide
freewaymedtech.com MT300-13T Basic operation guide
AEthernet port DHeadphone-out
BHDMI-out EUSB 3.0 port
CUSB 2.0 ports FDC-in
1Programmable button 3Trigger button
2Power button 4Battery latch
I/O PORTS
BUTTON FUNCTIONS
A
Battery/Power LED
2
4
D
3
E
F
B
C
1
BASIC FEATURES
The MT300-13T wireless tablet integrates a bright and multi-touch display, one USB port, and embedded
networking elements such as wireless LAN. The MT300-13T is complemented by a suite of accessories,
including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience.
An MT300-13T typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other
wireless devices or access points. If your MT300-13T does not come with such a network adapter, please
consult your device provider to establish the desired network connectivity.
PRECAUTIONS
• Always exercise care when operating and handling the MT300-13T
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (optional) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the MT300-
13T should face away from direct light to reduce glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any AC-DC adapter
other than the one provided or acquired from the manufac- turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the
MT300-13T and disconnect all power sources. Report the problem to your device provider immediately.
• Never attempt to disassemble the MT300-13T, as this will void the warranty.
Power/Battery LED Status
• Blue indicates the battery is 25% to 100% charged
• Blinking blue indicates the battery is charging
• Orange indicates that the battery is between 11% to25%
• Blinking Orange indicates that the battery is below 10%
OPERATION
Powering ON and OFF
To activate the MT300-13T, push and quickly release the Power Button. The display will come on in a few
seconds. To put the MT300-13T in Standby mode, push and quickly release the Power Button. To turn the
MT300-13T off for extended storage, power off safely using any software function that “shuts down computer”
provided in the software operating system.
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed
after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be
established.
Conguring the Mobile Tablet
The MT300-13T may be congured using the utilities and methods dictated by the software operating system.
The MT300-13T should be congurable for various properties such as user proles, network features, and
several system elements.
Wireless Networking
Wireless LAN
The MT300-13T is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped
with a hidden custom antenna.
• Through the support of typical WLAN adapters, the MT300-13T should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the MT300-13T and the access points have to
match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly congure associated settings such as Authentication mode, etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
IMPORTANT NOTE
The battery packs shipped with your tablet may be low in power—please use the AC-DC adapter with the
MT300-13T when setting up for the rst time to fully charge the internal battery pack. You may charge the
external battery pack with it attached to the MT300-13T, or with the optional external battery charger kit.
IMPORTANT NOTE
When the batterypack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If plugging in the
AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may have
been drained substantially. Try unplugging/ replugging the AC-DC adapter to the MT300-13T a few times to
activate the charging process.
IMPORTANT NOTE
To conserve power, use (push and quick release) the Power Button to put the tablet in “Standby” mode while
not in use. Pushing briey on the same button will wake up the system within seconds.
IMPORTANT NOTE
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of hardware
shutdown is intended to be a means of recovery from lockups, and not as normal operation.
freewaymedtech.com MT300-13T Basic operation guide
USING THE MOBILE TABLET
Peripherals Support
Through its USB port, the MT300-13T supports a wide range of USB-based peripherals. These peripherals
are applicable for software installation, applications storage, data storage, and system software recovery and
updates.
For More Support
Users can download the Tablet Modules Basic Operation Guides from the Freeway Med-Tech website.
TO HOLD THE TABLET
Left hand: grip the left back side of the tablet
with your left hand four index ngers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index ngers, with thumb
resting on the top of the back side of the tablet and
palm securely against the back.
freewaymedtech.com MT300-13T Basic operation guide
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CLEANING THE MT300-13T TABLET
You can clean the MT300-13T Tablet as often as required. All health care institutions will have a recommended
minimum frequency for routine cleaning of various items within their facility. This may be weekly, daily or after
each use depending on the risk involved.
The screen
• An antibacterial cleaning solution (70% alcohol) that is non-abrasive can be used to clean the touch screen.
• Cleaning with a micro-ber cloth is recommended.
• Please spread the solution onto the cloth and then clean the touch screen.
• It is recommended to wipe the screen in a top to bottom motion and nish across the bottom to minimise
streaking and to prevent excess moisture running down off the bezel.
The anti-microbial enclosure
• Use a soft/non-abrasive cloth moistened with cleaning solution (70% alcohol) to clean the enclosure.
• To prevent scratching the anti-microbial coating, please wipe gently.
