FRENETIK Core 4 User manual

Dante™ PoE+ 4 x 30 W /
Mid-Span Distributor
V1.1 - 03/2020
User’s manual
Core 4

User’s manual - Core 4 V1.1 03/2020 2/8

User’s manual - Core 4 V1.1 03/2020 3/8
CORE 4 - USER MANUAL Page
1. Carton Contents 4
2. Introduction 4
3. Example of use 4
4. Technical specifications 5
5. LED indicators 6
6. Operation of the dip-switches for the Power over Ethernet (PoE) function 6
7. Overview 7

User’s manual - Core 4 V1.1 03/2020 4/8
1. Carton Contents
- 1 Dante™ PoE+ Core 4 distributor
- 1 power cord
- 1 user manual
2. Introduction
The Dante™ PoE+ Core 4 distributor offers one 10/100 Mbit/s connection port on the
front panel and four 10/100 Mbit/s PoE+ ports on the rear panel.
The power activation for each output is performed by dip-switches on the front panel. The
power available on each port is 30 W.
The PoE budget for all ports is 115W. The compact distributor operates without forced
ventilation and can therefore be easily positioned in false ceilings, cabinets, etc. The power
supply for each output is provided by dip-switches on the front panel.
Each port is equipped with a cable auto-detection system which allows the use of straight
cables for any type of connection. Likewise, each port automatically detects the speed and
transmission mode used and automatically adapts: 10 Mbits/s or 100 Mbits/s - Half-Duplex
or Full-Duplex.
3. Example of use
Spik 3 Spik 3
Spik Sub
Spik Sub
Spik 3 Spik 3
Spik 3 Spik 3
Adjust
Spik 5 Spik 5
Spik 5 Spik 5
Core 8
Core 4

User’s manual - Core 4 V1.1 03/2020 5/8
4. Technical Specifications
Ref. PS410DP
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow Control
IEEE 802.3at/af PoE
midspan PoE
Ports
Number of ports: 5
PoE ports : 4
PoE enable (On/Off): Dip-Switches
Ethernet switch features
MAC Address: 1K
Buffer Memory: 48KB
Store and Forward
Auto MDIX
Auto Negotiation
Non-Blocking
Packet filtering/transmission
speeds
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Network cables 100BaseTx Cat. 5 UTP/STP
10BaseT Cat. 3, 4, 5 UTP/STP
Standard PoE wiring 4, 5, 7 ,8
LED indicators
Per port: Activity / link with 10/100M, PoE
ON/OFF (except Uplink)
For the device: Power
Power Input: 100-240 VAC, 50~60 Hz
Outputs: 56 VDC 2.14 A (120 W)
PoE power on each port 30 W
Power consumption (excluding
PoE) 5 Watts (Max)
Dimensions 44 × 160 × 122 mm (H x L x P)
Weight 0.80 kg
Operating temperature range 0 to 40°C
Storage temperature range -20°C to 90°C
Humidity 10 to 90% (non-condensing)
Certifications FCC Classe B, CE

User’s manual - Core 4 V1.1 03/2020 6/8
5. Indicateurs LED
Power CONTINUOUS GREEN indicates that the unit is in operation
Uplink
GREEN LIGHT indicates that the Ethernet Uplink port is connected
FAST FLASH indicates activity with a 100 Mbits link.
SLOW FLASH indicates activity with a 10 Mbps link
Link
GREEN LIGHT indicates that the corresponding Ethernet port is
connected
FAST FLASH indicates activity with a 100 Mbps link from the
corresponding port.
SLOW FLASH indicates activity with a 10 Mbps link from the
corresponding port
PoE+
GREEN LIGHT Indicates that the PoE function of the corresponding
port is enabled
OFF LIGHT Indicates that the PoE function of the corresponding
port is not enabled
6. Operation of the dip-switches for the Power over Ethernet (PoE) function
Ports 1 to 4 DIP ON
Per PoE+ port 30 Watts injected
Actual budget Total PoE 115 Watts
Note that dip-switches can be manipulated at any time. However, it is advisable to activate
them before connecting the cables to the PoE ports. The device will automatically power
off and on again if the total PoE consumption exceeds the available PoE budget. If this
happens, it is advisable to turn off a PoE port.

User’s manual - Core 4 V1.1 03/2020 7/8
7. Overview
12 3 4 5
6 7
1. Uplink port operation indicator diode
2. Mains power indicator diode
3. LEDs for individual indication of PoE power presence and operation of each output port
4. PoE Activation Dip-Switch for each output port
5. Input port connector (Uplink)
6. Output Connectors
7. Mains power connector

FRENETIK - 1 Allée d’Effiat - Le Parc de l’Événement - Bât. H
91160 Longjumeau - France
[phone]
frenetik.fr