Frigidaire CGLES389FB5 Use and maintenance manual

ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates.
• ' Even-Cook' •
Convection Oven
Four 4 Colwedioll
Qiisson _ale
_1_6 i_ Speed
.-auage dean
/Clean _') _loc_ Tinle_
#odog# onmff
mn,j_ie ,7 ::8,,:9:
Anmdel I_P_R_
f
Col!v _._ke Preheat Neff%age _Iketh_ E_'n.Cook Cen_; _tion Ovglts
7 8
(°lWr°_st Broil Maxx CIo(k on,off Cl_r/Off 0
mu_ deal_ cha_d _tim_ter_e
_c_trols
123
456
9
START
DEPART
Conv Bake
iUsed to
select the
convection
bake feature.
Preheat-- Speed Clean --
Use to pre- Use to select a
condition the 2 hour Self-
oven Cleaning cycle•
temperature•
Conv
Use to select the
N
Convection
Convert feature. X
Bake--Use to select th_
normal baking feature. \
Broil-- Use to selectX
variable Broil
Conv Roast-- Use to
select the
Roast feature.
Maxx Clean-- Use to
select a 4 hour Self-
Cleaning cycle.
Clean-- Use Oven Clock-- Timer ON/ 0 Thru g
to select a 3 Light-- Use Use to set OFF-- Use to number
hour Self- to turn the the time of set or cancel
Cleaning oven light ON day. the minute padsiUse
and OFF. to enter
temperature
and times.
Bake Time _ Start Time-- Use with Bake,
Use to enter the Bake Time and Clean Pads to
length of the program a Delayed Timed Bake
baking time. or Delay Self-Cleaning cycle.
f*
Kee_ _arrn dear/Off_
_i i_ _!.!ule_
Kee ,Warm \
iUse to
select the
Keep Warm
feature.
Start-- Use
to start all
oven
features
used
with Oven
Light).
Clear/Off or Lock Controls- Use to cancel
any oven mode previously entered except
the Time of Day & Minute Timer. Push
Clear/Off to stop cooking. Also used to
control the Oven Lockout feature•
Minimum &Maximum Control Pad Settings
All the features listed have minimum and maximum time or temperature settings that may be entered into the control. An
ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE MIN. TEMP./TIME MAX. TEMP./TIME
PREHEAT TEMP. 170°F/77°C 550°F/288°C
BAKE TEMP. 170°F/77°C 550°F/288°C
BROIL TEMP. 400°F/205°C 550°F/288°C
MINUTE TIMER 12 Hr. 0:01 Min. 11:59 Hr./Min.
24 Hr. 0:01 Min. 11:59 Hr./Min.
CLOCK TIME 12 Hr. 1:00 Hr./Min. 12:59 Hr./Min.
24 Hr. 0:00 Hr./Min. 23:59 Hr./Min.
COOK TIME 12Hr. 0:01 Min. 11:59 Hr./Min.
24 Hr. 0:01 Min. 11:59 Hr./Min.
START TIME 12 Hr. 1:00 Hr./Min. 12:59 Hr./Min.
24 Hr. 0:00 Hr./Min. 23:59 Hr./Min.
CONVECTION BAKE 170°F/77°C 550°F/288°C
CONVECTION ROAST 170°F/77°C 550°F/288°C
Printed in United States
Versi6n en espafiol
Si desea obtener una copia
en espafiol de este Manual
del Usuario, sirvase escribir
a {a direcci6n que se incluye
a continuaci6n. Solicite la P/
N318204125E.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961
318204126 (0707) Rev. B

Setting the Clock
Clock
The .o_log_pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
time in the display will flash.
INSTRUCTIONS PRESS
To set the clock (example below for 1:30)
tiOc_"CLO"
1. Press .orlog_. will appear in the display (Figure 2). Clock
Horloge
.Press 1 pads to set the time of day to 1:30 (Figure 3).
"CLO" will stay in the display. Press "CLO" will disappear
and the clock will start (Figure 4).
(1 3)10
Changing between 12 or 24 hour time of day display
_i_ic_for
1. Press and hold ,oriole 7 seconds (Figure 3). After 7 seconds,
"12h" (Figure 5) or "24h" (Figure 6) will appear in the display and
the control will beep once.
"Clean
2. Press Ne!!o_*to switch between the 12 and 24 hour time of day
display, The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
_TART _ ............
3. Press to accept the change or press Oear/Off_
'A,,,_°_/toreject the
,/
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
,o_,%_for 7 seconds
Clean
Oear/Ofg
or Annulet/
\
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
Timer _"
The TIMER ONIOFF o,,io, and CLEAN :Clean
M!!,!_e _.<!o_f_fpads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking. INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
5im_r
1. Press and hold °n/°ff_for 7 seconds (Figure1). After 7 seconds
M]nu!erie
"12h" or % -h" will appear in the display and the control will
beep once.
2. Press clean'
_e!toy_ to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "- -h" indicates the control is set for the Continuous
Bake feature (Figure 3).
3. Press to accept the change (Figure 4; display will return
to time of day) or press d_,_/of_
A,_,,,ler'to reject the change.
,/
PRESS DISPLAY
T met
On/Offfor 7
M_,,,t_ Figure 1
seconds
Clean
Figure 2
Figure 3
de._/of_
Annuler
Figure 4
Setting Timer
Timer
The TIMER ON/OFF on/off pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will
M]I)U!_e,_ie
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS PRESS DISPLAY
To set the Timer (example for 5 minutes)
TimeJl
1. Press _,_,l,u/O_..... will appear and "TIMER" will flash in the
display (Figure 5).
2. Press the number pads to set the desired time in the display
(example ( 5 ). Press The time will begin to count down
with "5:00" and "TIMER" will stay in the display (Figure 6).
Note: If is not pressed the timer will return to the time of
day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every
7Ti_'r
5 seconds until on/off is pressed.
rdinut,_y4e
To cancel the Kitchen Timer before the set time has
run out
Timer
Press o,,/off The display will return to the time of day.
,Thn_'r
On/Off
MJ!!ute;de
,,::;::ii_i_Pk_i:
Timer
(On/Off}
re![!]J!er,ie
filmer
On/Off
Mirlu!r_ie
Figure 5
Figure 6
Figure 7

Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
The dear/off
_,,,,,_erpad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS PRESS DISPLAY
To activate the Oven Lockout feature
1. Press and hold dear/Of_
gnnuler =or 3 seconds.
,/
2. After 3 seconds a beep will sound, "LOC" will appear and
"DOOR LOCKED" will flash in the display (If you have a range
see figure l-A; if it's a wall oven see figure I-B). Once the oven
door is locked the "DOOR LOCKED" indicator will stop
flashing.
To reactivate normal oven operation:
1. Press and hold cl_a_/o#for 3 seconds. A beep will sound. "LOC"
Annuler _
will disappear. The "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (Figure 2).
2. The oven is again fully operational.
/" ,\
Clear/Off T3 seconds
Annuleri .or
\/
" %
dear/Offi
Annuleri for 3 seconds
Figure 1-A
Figure 1-B
Figure 2
Setting Silent Control Operation
S_a_rttin_ .............,
fClean
The START TIME _o,redoand CLEAN pads control the Silent Control operation feature, The Silent Control operation
_epar_ .....
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press
and hold ,o,,r0aofor 7 seconds. % - - -" will appear and "DELAY"
will flash in the display (Figure 3). After 7 seconds "SP" will
appear in the display (Figure 4).
/Clean'
2. Press Nettoye_ to switch between normal sound operation and
silent operation mode. The display will show either "SP"
(Figure 4) or "--" (Figure 5).
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If % -" appears (Figure 5), the control is in
the silent operation mode.
3. Press to accept the change or press d_,r/of_
'An,,ul_'to reject the
change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if
the control is set to silent operation.
s;_riii,f_
Heurede for 7 seconds
/
(Clean
_ettof_
_,,ao.,/of_
D:EPART: _ Annuler]
Figure 3
Figure 4
Figure 5

Consumer Defined Controls (continued)
Setting Temperature Display = Fahrenheit or Celsius:
/" \
The BROIL and CLEAN Cleanpads control the Fahrenheit or Celsius temperature display modes. The oven
_iii_ Nettoyei;
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550 °''will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
/\
2. Press cleanto switch between Fahrenheit or Celsius display
Nettoy_
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
/
3. Press to accept the change or press (:i_ar/of_
An,.lerito reject the
/
change.
for7 seconds
(Clean
Nettoye_
or _lear/Of_
_PA_T: Annuler /
Figure 1
Figure 2
Figure 3

Setting Oven Controls
Setting Preheat
Preheat
The PREHEAT pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and
then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not
necessary when roasting or cooking casseroles. The oven can be programmed to )reheat at any temperature between
170°F to 550°F.
INSTRUCTIONS PRESS DISPLAY
To set the Preheat temperature for 375°F
1. Arrange the interior oven racks.
_h_at "350 °''
2. Press and "BAKE" will appear in the display
(Figure 1). Note that ifa preheat of 350°F is needed, press _TAP_.
3. Press _'3" 5 ."375°'' and "BAKE" will appear in the
\
display (Figure 2).
4. Press "PRE" and "BAKE" will appear in the display as
the oven heats and reaches 375°F (Figure 3).
Note: After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the "PRE" light will turn
off and oven temperature will be displayed (Figure 4). If you
missed hearing the beep, you can tell that the oven has reached
preheat temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, PLACE FOOD IN
THE OVEN. The "BAKE" light will stay on.
/"
Press dear/of_
A,,,,_. when baking is complete or to cancel the preheat
feature.
To change Preheat temperature while oven is
preheating (example: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
Pr_b_t
1. While preheating, press "375"
ch_ff_, and "BAKE" will appear in
the display (Figure 5)
2. Enter the new preheat temperature. Press
"425°" and "BAKE" will appear in the display (Figure 6).
33
_lear/Off,
Annuler/
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
3. Press "PRE" and "BAKE" will appear in the display as
the oven heats to 425°F (Figure 7). A beep will sound once the
oven temperature reaches 425°F and the display will show
"425°'' and "BAKE" (Figure 8).
/"
_Lear/0f_
4. When baking is complete press ,_nnuleri.
Note: Electric models only, while in preheat mode, the
convection fan and convection element will be activated during the
first rise of temperature to allow the oven to reach its target
temperature faster. The bake and broil elements will also cycle for
better heat distribution. 6
_,nnuleri
Figure 7
Figure 8

Setting Oven Controls (co.t n.e¢
Setting Bake
The BAKE paa controls normal baking. The oven can be programmed to bake at any temperature from 170 ° F to
550 ° F (The sample shown below is for 375°F).
INSTRUCTIONS
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
"350..... BAKE"
2. Press will appear and will flash in the
display (Figure 1). If a bake of 350°F is needed, press _PART-
(Figure 2). "BAKE" will continue to flash
3. Press 3 ("
and "375°" will appear in the display.
,display will show "375°" and "BAKE" (Figure 3).
A beep will sound once the oven temperature reaches 375° F.
Pressing _e,r/off.... cancel the Bake feature at any time.
Annuler /will
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press
(Figure 4). "375 °'' will appear and "BAKE" will flash in the
display.
2. Press 4 2 5 (Figure 5). "BAKE"will continue to flash
\ ....... ......
and "425°'' will appear in the display.
Press
3. ::_PA_."BAKE" and "425°" will stay in the display (Figure 6).
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately,
Note: Electric models only, during the first rise of temperature, the
convection fan and convection element will be activated to allow the
oven to reach its target temperature faster. The Bake and Broil
elements will also cycle for a better heat distribution.
PRESS DISPLAY
_lear/Offi
An nlller /
\
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

Setting Oven Controls (cont n.e¢
The CONV BAKE _ _ pad controls the Convection Bake feature. The
oven can be programmed for Convection baking at any temperature between
170°F (77°C) to 550°F (288°C).
Convection baking uses a fan to circulate the oven's heat evenly and con-
tinuously within the oven (Figure 1). This improved heat distribution allows for
even cooking and excellent results using multiple racks at the same time.
Foods cooked on a single oven rack will generally cook faster and more
evenly with Convection Bake. Multiple oven rack cooking may slightly in-
crease cook times for some foods, but the overall result is time saved.
Breads and pastries brown more evenly.
General Convection Bake instructions:
1. When using Convection Bake, adjust the cook time for desired doneness
as needed. Time reductions will vary depending on the amount and type
of food to be cooked. Cookies and biscuits should be baked on pans with
no sides or very low sides to allow heated air to circulate around the
food. Food baked on pans with a dark finish will cook faster.
2. Preheating is not necessary when cooking casseroles with Convection
Bake.
3. When using Convection Bake with a single rack, place oven rack in
position 2 or 3. If cooking on multiple racks, place the oven racks in
positions 2 and 4.
INSTRUCTIONS
To set the oven for Convection Bake and
temperature to 375°F
1. Arrange interior oven racks and place food in oven.
c_n _e
2. Press _,,_ "CONV BAKE"will flash and "350 °" will appear
in the display (Figure 3). If a Convection bake of 350°F is
needed, press
3. Press ( 3 7 "CONY BAKE" will keep flashing and
"350°" will appear in the display (Figure 4).
4. Press "CONV BAKE" will stop flashing and the fan icon
will appear in the display (Figure 5).
Note: The display will show an icon of rotating fan within a square.
This rotating fan icon indicates when the Convection Fan is
operating. Electric Models: The convection fan and convection
element will start AS SOON AS the oven is set for Convection
Bake. Gas Models: Please allow up to 6 minutes for the
convection fan and convection element to activate.
(lear/Of_ - -
Press 'An,0_er_o s_op Convection Bake or cancel Convection Bake
at any time.
Figure 1
Air
circulation
during
Convection
Bake
4th Rack
position
3rd Rack
position
2nd Rack
_osition
1st Rack
position
Figure 2
Benefits of Convection Bake:
--Multiple rack baking.
--Some foods cook up to 30%
faster, saving time and energy.
--No special pans or bakeware
needed.
PRESS DISPLAY
,3(7 5
Figure 3
Figure 4
Figure 5
is ¸ •. _•
Clear/Off_
Annuler

Setting Oven Controls <oont n.e¢
Setting Convection Roast
The CONV ROAST pad is designed to give optimum cooking performance for this feature. The Convection
Roast pad combines a cook cycle with the convection fan and element to roast meats and poultry. Preheating is not
necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in juices and flavors.
Foods are crispy brown on the outside while staying moist on the inside.
INSTRUCTIONS PRESS DISPLAY
To set the Convection Roast feature (example: Meats to
cook at 375°F)
1. Arrange interior oven racks and place food in oven.
c_:__st
2. Press R_i_e_. "CONV ROAST" will flash and "350°'' will be
displayed (Figure 1).
3. Press ". "CONV ROAST" will flash and "375 °" will
appear in the display (Figure 2).
4. Press "CONV ROAST" and "375°" will appear in the display
(Figure 3). The convection fan icon will come on.
x
Press _lear/Of_ • *
'A,,,,,_er'[o s_op Convection Roast at any time.
Note: The display will show an icon of rotating fan within a square. This
rotating fan icon indicates when the Convection Fan is operating.
Electric Models: The convection fan and convection element will start
AS SOON AS the oven is set for Convection Bake. Gas Models:
Please allow up to 6 minutes for the convection fan and convection
element to activate.
/f- • •.\
(_lear/Of fl
_,nnuler /
Figure 1
Figure 2
Figure 3
Roasting Rack Instructions (some models)
When preparing meats for convection roasting, use the broiler pan and insert along
with the roasting rack (if equipped). The broiler pan will catch grease spills and the
insert will help prevent grease splatters. The roasting rack will allow the heat to
circulate around the meat.
To prevent food from contacting the broil element and to prevent
grease splattering, DO NOT use the roasting rack when broiling.
1. Place oven rack on bottom or next to the bottom rack position. See Arranging
Oven Racks in the Before Setting Oven Controls section.
2. Place the insert in the broiler pan. The roasting rack fits on the insert allowing the
heated air to circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated on
the insert in the broiler pan. DO NOT use the broiler pan without the insert. DO
NOT cover the insert with aluminum foil.
3. Position food (fat side up) on the roasting rack (Figure 4).
4. Place the broiler pan on the oven rack.
Figure 4

Setting Oven Controls (oont nued)
Setting Convection Convert feature
The _n _i_CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert may ONLY be used with a Bake, Timed Bake or a Delay Start (Delayed Timed Bake) setting.
When used with a Timed Bake or a Delayed Timed Bake setting, the Convection Convert feature will display a "CF" for
check food when the bake time is 75% complete (See Figure 3). At this time the oven control will sound 3 long beeps at
regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and
will sound 3 long beeps every 30 seconds until the de,_/of_A,,.u_e_pad is pressed.
INSTRUCTIONS PRESS DISPLAY
To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F (204°C) normal
bake recipe to a convection bake recipe:
When the CONV BAKE mode is on at 400°F (204°C) (Figure 1), press
_._,_. "CONV BAKE" and the over] temperature adjustment will appear
in the display (for this example it is 375°F). A beep will sound once the
adjusted oven temperature is reached. The display will show "375 °",
"CONV BAKE" and the fan icon (Figure 2).
Note: When using a Cook Time, the convection convert will not operate if
you have a timed bake under is 20 minutes.
Figure 1
Figure 2
Figure 3
10