Frigidaire DGEF3031KB - Gallery 30" Smoothtop Electric... Owner's manual

All about the
Use&Care
of your
TABLE OF CONTENTS
www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352
Electric Range
316902203 Rev E (Jan 2012)
Important Safety Instructions ........................... 3-5
Features at a Glance ......................................... 6
Before Setting Oven Controls ........................... 7-8
Before Setting Surface Controls ..................... 9-10
Setting Surface Controls (Ceramic cook top) ..11-14
Oven Control Functions (330/330i) .................... 15
Setting Oven Controls ..................................16-22
Self-Cleaning ..............................................23-24
Care & Cleaning ..........................................25-28
Before You Call ............................................29-31
Major Appliance Warranty .................... back cover

2
Thank you for choosing Frigidaire.
This Use & Care Guide is part of our commitment to customer
satisfaction and product quality throughout the service life of
your new appliance.We view your purchase as the beginning
of a relationship. To ensure our ability to continue serving you,
please use this page to record important product information.
©2010 Electrolux Home Products, Inc. All rights reserved. Printed in the USA
Registering your product with Frigidaire enhances our ability
to serve you. You can register online at
www.frigidaire.com or by dropping your Product
Registration Card in the mail.
PRODUCT RECORD AND REGISTRATION
Product Registration
Product Registration ...................................................... 2
Important Safety Instructions ............................ 3-5
Features at a Glance .............................................. 6
Before Setting Oven Controls ............................... 7-8
Removing, replacing & arranging the oven racks ........... 7
Effortless™ Oven Rack system and assembly ................ 8
Before Setting Surface Controls ......................... 9-10
About the ceramic cooktop & radiant elements ............. 9
Cookware material types .......................................... 10
Setting Surface Controls .................................. 11-14
Setting single radiant surface elements ...................... 11
Setting dual radiant surface elements ........................ 12
Setting the Keep Warm zone .................................... 13
Home canning ......................................................... 14
Oven Controls Functions ........................................ 15
Setting Oven Controls ...................................... 16-22
Setting the clock ...................................................... 16
Changing between continuous bake or 12-Hour
Energy Saving features ............................................ 16
Changing oven temperature display (F° or C°) ............ 16
Setting silent control feature ..................................... 16
Setting oven lockout feature ..................................... 17
Setting minute timer ................................................ 17
Setting bake ........................................................... 18
Setting timed bake and delayed timed bake............18-19
Setting Quick Bake (some models) ............................ 20
Setting broil ............................................................ 21
Adjusting oven temperature ..................................... 22
Operating oven light................................................. 22
Self-Cleaning .................................................... 23-24
Care & Cleaning ............................................... 25-28
Cleaning recommendations table............................... 25
Cooktop maintenance & cleaning...........................26-27
Aluminum foil and oven liners ................................... 27
Replacing interior oven light ..................................... 27
Removing & replacing oven door ............................... 28
Before You Call
Solutions to common problems .............................29-31
Appliance Warranty ................................. back cover
Contents
Serial plate location:
open storage drawer (some models) or
removelower front panel(some models).
Serial plate location
Purchase date
Model number
Serial number
Record model & serial numbers here
Need help??
Visit the Frigidaire web site at www.frigidaire.com
Before you call for service, there are a few things you can
do to help us serve your better.
Read this Use & Care manual.
It contains instructions to help you use and maintain your
range properly.
If you received a damaged range ...
immediately contact the dealer (or builder) that sold you the
range.
Save time and money.
Check the section titled “Before You Call”. This section helps
step you through some common problems that might occur.
If you do need service, help is only a phone call away. Call
Frigidaire Customer Services at 1-800-944-9044.

3
Read all instructions before using this appliance.
Do not attempt to install or operate your appliance until you
have read the safety precautions in this manual. Safety
items throughout this manual are labeled with a WARNING
or CAUTION statement based on the risk type.
Save these instructions for future reference.
IMPORTANT SAFETY INSTRUCTIONS
• Proper installation—Be sure your appliance is
properly installed and grounded by a qualified
technicianin accordance withtheNational Electrical
CodeANSI/NFPA No. 70latest edition andlocal
electrical code requirements. Install only per
installation instructions provided in the literature package
for this range.
Definitions
• User servicing—Do not repair or replace any part
ofthe appliance unlessspecifically recommended in
the manuals. All other servicing should be done only by a
qualified technician. This may reduce the risk of personal
injury and damage to the range.
Ask your dealer to recommend a qualified technician and
an authorized repair service. Know how to disconnect the
power to the range at the circuit breaker or fuse box in
case of an emergency.
• Never modify or alter the construction of a range
by removing the leveling legs, panels, wire covers,
anti-tip brackets/screws, or any other part of the
range.
• Remove the oven door from any unused range if it
is to be stored or discarded.
• Never use your appliance for warming or heating
the room.
WARNING
• Stepping, leaning or sitting on the door or
drawers of a range can result in serious injuries
and also cause damage to the appliance. DO NOT
allow children to climb or play around the range. The
weight of a child on an open oven door may cause the
range to tip, resulting in serious burns or other injury.
WARNING indicates a potentially hazardous
situation which, if not avoided, may result in death
or serious injury.
WARNING
IMPORTANT
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
CAUTION
IMPORTANT indicates installation, operation,
maintenance or valuable information that is not hazard
related.
WARNING
Tip Over Hazard
• A child or adult can tip the
rangeand bekilled.
• Verify the anti-tip device has
been installed to floor or wall.
To check if the anti-tip bracket is installed properly, use
both arms and grasp the rear edge of range back.
Carefully attempt to tilt range forward. When properly
installed, the range should not tilt forward.
Refer to the anti-tip bracket installation instructions
supplied with your range for proper installation.
• Ensure the anti-tip device is re-engaged when
the range is moved to floor or wall.
• Do not operate the range without the anti-tip
device in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Range
leveling leg Anti-Tip
bracket
• Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.

4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Do not store items of interest to children in the
cabinets above a range or on the backguard of
the range. Children climbing on the range to reach
items could be seriously injured.
• Do not touch surface heating units or surface
cooking elements, areas near these units or
elements, or interior surface of the oven. Both
surface heating and oven heating elements may be hot
even though they are dark in color. Areas near surface
cooking units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or
other flammable materials touch these areas until they
have had sufficient time to cool. Among these areas
are the cook top, surfaces facing the cook top, the
oven vent openings and surfaces near these openings,
oven door and oven door window.
• Wear proper apparel — loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
• Do not use water or flour on grease fires — flour
may be explosive. Smother the fire with a pan lid,
or use baking soda, a dry chemical or foam-type
extinguisher.
• When heating fat or grease, watch it closely. Fat
or grease may catch fire if allowed to become too hot.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
• Use care when opening oven door , lower oven
door or warmer drawer (if equipped)—Stand to the
side of the range when opening the door of a hot oven.
Let hot air or steam escape before you remove or replace
food in the oven.
• Keep oven vent ducts unobstructed. The oven vent
is located under the left rear surface element if your
model is equipped with coil elements. The oven vent is
located below the backguard for models equipped with
ceramic-glass cook tops. Touching the surfaces in this
area when the oven is operating may cause severe
burns. Also, do not place plastic or heat-sensitive items
on or near the oven vent. These items could melt or
ignite.
• Placement of interior oven racks. Always place oven
racks in desired location while oven is cool. If rack must
be moved while oven is hot use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven. Remove all utensils from the rack
before moving.
• Do not use the broiler pan without its insert. The
broiler pan and its insert allow dripping fat to drain and
be kept away from the high heat of the broiler. Do not
coverthe broiler insertwith aluminum foil.Exposed
fat and grease could ignite.
• Protective liners—Do not use aluminum foil to line the
oven bottom. Only use aluminum foil as recommended in
this manual. Improper installation of these liners may
result in risk of electric shock, or fire.
Do not attempt to operate the range during a
power failure. If the power fails, always turn off the
range. If the range is not turned off and the power
resumes, the range will begin to operate again. Once the
power resumes, reset the clock and oven function.
IMPORTANT
• Storage in or on appliance — to avoid a fire
hazard,flammable materialsshouldnotbestored
in an oven, near surface units or in the storage
drawer, warmer drawer or lower oven. This
includes paper, plastic and cloth items, such as
cookbooks, plasticware and towels, as well as flammable
liquids. Do not store explosives, such as aerosol cans, on
or near the range.
• DONOTLEAVECHILDRENALONE—toavoid
injuries or burns children should not be left alone
or unattended in the area where the range is in
use. They should never be allowed to sit or stand on any
part of the range including the storage drawer, lower
broiler drawer, lower oven or warmer drawer.
WARNING
• Use dry potholders — moist or damp potholders on
hot surfaces may result in burns from steam. Do
not let potholders touch hot heating elements. Do not use
a towel or other bulky cloth instead of a potholder.
• Do not heat unopened food containers - buildup of
pressure may cause container to burst and result
ininjury.
CAUTION

5
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
• Know which knob controls each surface heating
unit. Place a pan of food on the unit before turning it on,
and turn the unit off before removing the pan.
• Use proper pan size—This appliance is equipped with
one or more surface units of different sizes. Select
utensils having flat bottoms large enough to cover the
surface unit heating element. The use of undersized
utensils will expose a portion of the heating element to
direct contact and may result in ignition of clothing.
Proper relationship of utensil to element will also improve
efficiency.
• Utensil handles should be turned inward and not
extend over adjacent surface elements—To reduce
the risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil, the
handle of the utensil should be positioned so that it is
turned inward, and does not extend over adjacent
surface units.
• Never leave surface elements unattended at high
heat settings—Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.
• Do not immerse or soak removable heating
elements—Heating elements should never be immersed
in water. Heating elements clean themselves during
normal operation.
•Glazed cookingutensils—Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for cook top service without breaking
due to the sudden change in temperature. Check the
manufacturer’s recommendations for cook top use.
• When flaming foods under a ventilating hood, turn
the fan on.
IMPORTANTINSTRUCTIONSFORCLEANING
YOUR RANGE
•Clean the range regularly to keep all parts free of
grease that could catch fire. Pay particular attention
to the area around each surface element. Do not allow
grease to accumulate.
• Kitchen cleaners and aerosols—Always follow the
manufacturer’srecommended directionsfor use.
Be aware that excess residue from cleaners and aerosols
may ignite causing damage and injury.
•Clean ventilating hoodsfrequently—Grease should
not be allowed to accumulate on the hood or filter.
Follow the manufacturer’s instructions for cleaning hoods.
FOR CERAMIC-GLASS COOK TOP MODELS
• Do not cook on broken cook top—If cook top should
break, cleaning solutions and spillovers may penetrate
the broken cook top and create a risk of electric shock.
Contact a qualified technician immediately.
• Clean cook top with caution—If a wet sponge or cloth
is used to wipe spills on a hot cooking area, be careful to
avoid a steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to such
substances.
SELF-CLEANING OVENS
• Clean in the self-cleaning cycle only the parts
listed in this Use & Care Manual. Before self-cleaning
the oven, remove the broiler pan and any utensils or
foods from the oven.
• Do Not Use Oven Cleaners—No commercial oven
cleaner or oven liner protective coating of any kind should
be used in or around any part of the oven.
• Do Not Clean Door Gasket—The door gasket is
essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
•The health of some birds is extremely sensitive to the
fumes given off during the self-cleaning cycle of any
range. Move birds to another well-ventilated room.

6
Your electric range features include:
1. Electronic oven control with kitchen timer.
2. Left front single (some models), dual (some models) or triple (some
models) radiant element control.
3. Left rear single (some models) or dual (some models) radiant control.
4. Keep Warm zone radiant element control (some models).
5. Right rear single (some models) or dual (some models) radiant
element control.
6. Right front single (some models), dual (some models) or triple (some
models) radiant control.
7. Element ON indicator light(s).
8. HOT SURFACE indicator light(s).
9. Quick Bake cooking system pad (some models).
10. Quick Bake cooking system indicator light (some models).
11. Oven interior light with removable cover.
12. Automatic oven door light switch (some models).
13. Self-cleaning oven interior.
14. Self-clean door latch.
15. Quick Bake cooking system fan (some models).
16. Adjustable interior oven rack(s). Effortless Oven Rack™ system (not
shown-some models).
17. Large 1-piece oven door handle.
18. Full width oven door with window.
19. Storage drawer with large 1-piece door handle (some models) or
lower cover panel (some models).
20. Easy to clean upswept cooktop.
21. Ceramic smoothtop (elements, styles and color will vary by model).
22. 6” single radiant element (some models).
The features shown for your appliance may
vary according to model type & color.
APPLIANCE FEATURES
1
23456
9
77777
8
23. 5-7” dual radiant element (some models).
24. 9” single radiant element (some models).
25. 6-9” dual radiant element (some models).
26. 12” single radiant element (some models).
27. Keep Warm zone radiant element (some
models).
28. Broil pan (some models).
29. Broil pan insert (some models).
30. Leveling legs and anti-tip bracket (included).
10
11 13
15
14
16
17
18
19
20
21
26
22
23
22
23
24
25
26
24
25
27
28
29
30
12
20
Be sure to visit us online at
www.frigidaire.com
for a complete line of accessories.

7
Types of oven racks
Your range may be equipped with one or more of the oven
rack styles shown.
BEFORE SETTING OVEN CONTROLS
Oven vent location
The oven vent is located under the left side of the
control panel (See Fig. 1). When the oven is on, warm
air passes through this vent. This venting is necessary for
proper air circulation in the oven and good baking results.
Do not block the oven vent.
oven vent location
Fig. 1
Recommended rack positions by food type
Food type Position models with Position models with
visible bake element (Fig. 2) hidden bake element (Fig. 3*)
Broiling meats See broil section See broil section
Cookies, cakes, pies, biscuits & muffins 3 or 4 3 or 4
Frozen pies, angel food cake, yeast, bread, casseroles 2 or 3 2 or 3
Small cuts of meat or poultry 2 or 3 2 or 3
Turkey, roast or ham 2 1 or 2
flat
oven rack
flat handle
oven rack
bottom
oven rack
offset
oven rack
Oven with visible
bake element - Fig. 2 Oven with hidden
Bake Element - Fig. 3*
The flat oven rack or flat handle oven rack (some
models) may be used for most cooking needs. The
Effortless™ Oven Rack (some models) is described later
in this section.
The offset oven rack (some models) is designed to place
the base of the rack about 1/2 of a rack position lower than
normal. This rack design provides several additional
possible positions between the standard postions.
To maximize oven cooking space place the bottom oven
rack (some models) in the lowest rack position for baking
and when roasting large cuts of meat.
Removing, replacing & arranging racks
To remove - pull the rack forward until it stops. Lift up
front of rack and slide out.
To replace - fit the rack onto the guides on the oven walls.
Tilt the front of the rack upward and slide the rack back into
place.
Arranging - always arrange the oven racks when the oven
is cool (prior to operating the oven).
Always use oven mitts when using the oven. When
using the appliance, oven racks and cooktop will become
very hot which can cause burns.
2
3
4
5
6
1
7
2
3
4
5
6
1
7
CAUTION
Effortless™
Oven
Rack
Only the Effortless™ Oven Rack should be used in
oven rack position 2. Placing any other rack in rack
position 2 will prevent the oven door from fully closing.
IMPORTANT
some
models

8
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack system
Some models are equipped with a special oven rack system
that automatically partially extends the oven rack from the
interior oven glides to assist in easier access to your food
items. This feature works whenever the oven door is
opened or closed.
CAUTION
Never pick up hot oven rack parts. Make sure the
oven and oven racks are COMPLETLY cool and safe to
touch before attempting to assemble or disassemble the
Effortless™ Oven Rack.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied
oven rack (Effortless™ Oven Rack is a flat rack with a
special dark coating on the left and right rack
sides) and the 2 supplied chrome connector arms.
2. Open the oven door. Be sure the oven is completely
cool before proceeding.
3. Place the oven rack in positions 2, 3 or 4 only (see
previous page to verify positions).Be sure the rack
connector brackets are at the rear of the range and
pointing towards oven bottom (See Fig. 2).
4. Assemble one connector arm at a time. With the oven
door open and the oven rack in place, install one end of
the connector arm to the hole in the door connector
bracket (Fig. 1) and the other end in the hole in the
rack connector bracket (Fig. 2 and as in Fig. 3). The
oven rack may need to be adjusted in or out in the rack
position to match the length of the connector arm.
5. While holding the connector arm in place, twist the
connector arm so the ends of the connector arm point
upwards (See Figs. 4 & 5). The connector arm should
now be locked into position.
6. Repeat steps 4 and 5 for the other connector arm.
7. Once both connector arms are properly in place, be
sure to test the oven rack operation by gently closing
the oven door. The oven rack should move in and out of
the oven freely when the door is opened or closed.
Fig. 6 - Effortless™ Oven Rack after assembly
IMPORTANT
left and right
door connector
brackets
with connector arm ends
shown in locked position
(pointing upwards)
connector
arm
connector
arm
Fig. 5
Fig. 4
door
connector
bracket
rack connector
bracket
connector
arm
connector
arm
oven
rack
open oven
door
Fig. 2
Fig. 1
Fig. 3 - assembly
of the Effortless™
Oven Rack
IMPORTANT
REMOVEALL OVEN RACKSand accessories before
starting a self-clean cycle. If the oven racks are left in
the oven during the self-clean cycle, the glide ability of
the Effortless™ Oven Rack system will be damaged and
will cause oven racks to loose their shiny finish. Remove
ALL oven racks and clean according to instructions
provided in the Care & Cleaning section of this manual.
• Only the Effortless™ Oven Rack system should be
used in oven rack position 2. Placing ANY other rack
in oven rack position 2 will prevent the oven door
from fully closing and may damage the oven door,
oven cavity or the door connector brackets.
•If the rack system is not assembled with the connector
arms the Effortless™ Oven rack may be used in oven
rack positions 2 thru 7. Do not attempt to use the
Effortless™ Oven rack in rack position 1.

9
NOTES
About the ceramic glass cooktop
The ceramic cooktop has radiant surface elements located
below the surface of the glass. The design of the ceramic
cooktop outlines the area of the surface element
underneath. Be sure to match the pan size with the
diameter of the element outline on the cooktop and only
flat-bottomed cookware should be used.
The type and size of cookware, the number of surface
elements in use and their settings are all factors that will
affect the amount of heat that will spread to areas beyond
the surface elements. The areas surrounding the elements
may become hot enough to cause burns.
About the radiant surface elements
The element temperature rises gradually and evenly. As the
temperature rises, the element will glow red. To maintain
the selected setting the element will cycle ON and OFF. The
heating element retains enough heat to provide a uniform
and consistent heat during the off cycle.
For efficient cooking, turn OFF the element several minutes
before cooking is complete. This will allow residual heat to
complete the cooking process.
BEFORE SETTING SURFACE CONTROLS
Air circulation in the oven
For best baking results allow 2-4" (5-10 cm) around the
cookware for proper air circulation and be sure pans and
cookware do not touch each other, the oven door, sides or
back of the oven cavity. Hot air must be able to circulate
around the pans and cookware in the oven for even heat to
reach around the cookware (See Fig. 1).
Fig. 1
Element ON & hot surface indicator lights
Your appliance is equipped with two different types of
radiant surface control indicator lights that will glow on the
backguard — the Element On indicator light and the Hot
Surface indicator lights (See Fig. 2).
The Element ON indicator lights are located on the
control panel above each radiant element control knob and
will glow when a surface element is turned ON. A quick
glance at this indicator light after cooking is an easy check
to be sure ALL surface controls are turned OFF. The Hot
Surface indicator light located on the control panel will
glow when any surface cooking area heats up and will
remain on
until the glass cooktop has cooled to a
MODERATElevel.
element ON
indicator
light hot
surface
indicator
light
Fig. 2
•Radiant elements have a limiter that allows the surface
element to cycle ON and OFF, even at the HI setting.
This helps to prevent damage to the ceramic
smoothtop. Cycling at the HI setting is normal and will
occur more often if the cookware is too small for the
radiant element or if the cookware bottom is not flat.
• Be sure to read the detailed instructions for ceramic
glass cooktop cleaning in the Care & Cleaning and
Before You Call checklist sections of this Use & Care
Manual.
Baking layer cakes with 1 or 2 oven racks
For best results when baking cakes using 2 oven racks,
place cookware on rack positions 2 & 5. For best results
when using a single oven flat rack, place cookware on rack
positions 2, 3 or 4.

10
Flat bottom and straight
sides.
Tight fitting lids.
Weight of handle does
not tilt pan. Pan is well
balanced.
Pan sizes match the
amount of food to be
prepared and the size of
the surface element.
Made of a material that
conducts heat well.
Easy to clean.
Always match pot
diameter to element size.
Curved and warped pan.
Panlargerthancookingarea
markedoncooktopbymore
than one-half inch or 12mm.
Heavy handle tilts pan.
Pan is smaller or larger
than heating area marked
on cooktop.
Keep warm zone
surface control
(some models)
Single radiant
surface control Dual radiant surface control
(some models)
Cookware material types
The cookware material determines how evenly and quickly
heat is transferred from the surface element to the pan
bottom. The most popular materials available are:
Aluminum - Excellent heat conductor. Some types of food
will cause it to darken (Anodized aluminum cookware
resists staining & pitting). If aluminum pans slide across the
ceramic cooktop, they may leave metal marks which will
resemble scratches. Remove these marks immediately.
Copper - Excellent heat conductor but discolors easily. May
leave metal marks on ceramic glass (see Aluminum).
Stainless - Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
Cast Iron - A slow heat conductor however will retain heat
very well. Cooks evenly once cooking temperature is
reached. Not recommended for use on ceramic cooktops.
Porcelain-enamel onmetal - Heating characteristics will
vary depending on base material. Porcelain-enamel coating
must be smooth to avoid scratching ceramic cooktops.
Glass - Slow heat conductor. Not recommended for
ceramic cooktop surfaces because it may scratch the glass.
Using proper cookware
The size and type of cookware used will influence the
setting needed for best cooking results. Be sure to follow
the recommendations for using proper cookware as
illustrated in Figs. 2 & 3.
Fig. 2
Fig. 1
BEFORE SETTING SURFACE CONTROLS
The ceramic glass cooktop has radiant surface elements
located below the surface of the glass. The patterns on the
ceramic glass will outline the size and type of element
available. The single radiant element will have one round
outline pattern shown (keep warm zone is designed to
keep food warm only). The dual radiant element is flexible
because you may set just the smaller inner portion as a
single element or both inner and outer portions can be set
to heat together (See Fig. 1).
Fig. 3
Types of cooktop elements
Do not place empty aluminum, glass or porcelain-enamel
coated cookware on the ceramic cooktop! The melting
point of some cookware may be reached if left on the
cooktop empty and then can bond to the ceramic cooktop.
If the cookware melts it will damage the cooktop! Be sure
to follow all the cookware manufacturer’s suggestions
when using any type of cookware on the ceramic cooktop.
Cookware should have flat
bottoms that make good contact
with the entire surface heating
element (See Fig. 2). Check for
flatness by rotating a ruler
across the bottom of the
cookware (See Fig. 3).
IMPORTANT

11
Single radiant surface elements (all models)
To operate the single radiant element:
1. Place correctly sized cookware on single radiant surface
element.
2. Push in and turn the surface control knob in either
direction (Fig. 2) to the desired setting (Refer to the
Suggested radiant surface element settings
table Fig. 1). Start most cooking operations on a
higher setting and then turn to a lower setting to finish
cooking. The surface control knobs do not have to be
set exactly on a particular spot. Use the graphics
provided as a guide and adjust the control knob as
needed (See Fig. 2). Each surface element provides a
constant amount of heat at each setting. A glowing red
surface heating area extending beyond the bottom edge
of the cookware indicates the cookware is too small
for the surface heating area.
3. When cooking is complete, turn the radiant surface
element OFF before removing the cookware.
The suggested settings found in Fig.1 below are based
when cooking with medium-weight aluminum pans with
lids. Settings may vary when using other types of pans.
Suggested radiant surface element
settings
NOTES
Fig. 2
Suggested settings for single and dual radiant
elements table
Settings Typeof cooking
High (HI - 9) Start most foods, bring water to a
boil, pan broiling
Medium high (7 - 8) Continuea rapidboil, fry, deepfat fry
Medium (5 - 6) Maintain a slow boil, thicken sauces
and gravies or
steam vegetables
Medium Low (2 - 4) Keep foods cooking, poach, stew
Low (LO - 1) Keep warm, melt, simmer
CAUTION
SETTING SURFACE CONTROLS
Fig. 1
IMPORTANT
Donotallowaluminumfoil,orANYmaterialthatcan
melttomakecontactwiththeceramicglasscooktop.
If these items melt on the cooktop they will damage the
ceramic cooktop.
•The size and type of utensil used, and the amount and
type of food being cooked will influence the setting
needed for best cooking results.
•The Element ON indicator lights will glow when one or
more elements are turned ON. A quick glance at these
indicator lights when finished cooking is an easy check
to be sure all control knobs are turned OFF. The Hot
Surface indicator light will continue to glow AFTER the
control knob is turned to the “OFF” position and will
glow until the heating surface area has cooled
sufficiently.
•Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufficiently.
• Do not place flammable items such as plastic salt
and pepper shakers, spoon holders or plastic
wrappings on top of the range when it is in use. These
items could melt or ignite. Potholders, towels or
wooden spoons could catch fire if placed too close to
the surface elements.

12
CAUTION
Heating with inner (small)
element only Heating with both elements
Fig. 1 Fig. 2
Symbols on the backguard will help choose which portion of
the dual radiant element to set. The symbol indicates a
setting for the inner coil only. The symbol indicates a
setting for both inner and outer coils.
SETTING SURFACE CONTROLS
You may switch from either single or dual element setting
at any time during cooking. See Suggested radiant
surface element settings table on previous page.
To operate a dual radiant element:
1. Place correctly sized cookware on dual radiant surface
element.
2. Push in and turn the surface control knob clockwise
(See Fig. 2) to begin heating both the inner and outer
portions of the dual element. If only the inner heating
portion is needed for smaller cookware, push in and
turn the knob counter-clockwise (See Fig. 1).
3. When cooking is complete, turn the dual radiant surface
element OFF before removing the cookware.
Start most cooking operations on a higher setting and then
turn to a lower setting to finish cooking. The surface control
knobs do not have to be set exactly on a particular mark.
Use the marks as a guide and adjust the control knob as
needed. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area.
NOTES
IMPORTANT
Donotallowaluminumfoil,orANYmaterialthatcan
melttomakecontactwiththeceramicglasscooktop.
If these items melt on the cooktop they will damage the
ceramic cooktop.
•The size and type of utensil used, and the amount and
type of food being cooked will influence the setting
needed for best cooking results.
•The Element ON indicator lights will glow when one or
more elements are turned ON. A quick glance at these
indicator lights when finished cooking is an easy check
to be sure all control knobs are turned OFF. The Hot
Surface indicator light will continue to glow AFTER the
control knob is turned to the “OFF” position and will
remain on until the heating surface area has cooled
sufficiently.
Dual radiant surface elements (some models)
•Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufficiently.
• Do not place flammable items such as plastic salt
and pepper shakers, spoon holders or plastic
wrappings on top of the range when it is in use. These
items could melt or ignite. Potholders, towels or
wooden spoons could catch fire if placed too close to
the surface elements.

13
Keep warm (some models)
The purpose of the keep warm zone is to keep hot cooked
foods at serving temperature. Use the keep warm feature
to keep cooked foods hot such as; vegetables, gravies,
casseroles, soups, stews, breads, pastries and oven-safe
dinner plates.
Always start with hot food. It is not recommended to heat
cold food on the keep warm zone. All food placed on the
warming zone should be covered with a lid to maintain
quality.
For best results, when warming pastries or breads, the
cover should have an opening to allow moisture to escape.
Do not use plastic wrap to cover food. Plastic may
melt onto the surface and be very difficult to clean.
Use only dishware, utensils and cookware recommended
for oven and cooktop use on the keep warm zone.
SETTING SURFACE CONTROLS
CAUTION
Temperature selection - Refer to the keep warm zone
recommended food settings table (See Fig. 2). If a
particular food is not listed, start with the medium level,
and adjust as needed. Most foods can be kept at serving
temperatures by using the medium level.
Keep warm zone recommended food settings table
Food Item Heating Level
Breads/Pastries LO (Low)
Casseroles LO (Low)
Dinner Plates with Food LO (Low)
Eggs LO (Low)
Gravies LO (Low)
Meats MED (Medium)
Sauces MED (Medium)
Soups (cream) MED (Medium)
Stews MED (Medium)
Vegetables MED (Medium)
Fried Foods HI (High)
Hot Beverages HI (High)
Soups (liquid) HI (High)
Fig. 2
med
Fig. 1 (with approximate setting for medium shown)
IMPORTANT
Donotallowaluminumfoil,orANYmaterialthatcan
melttomakecontactwiththeceramicglasscooktop.
If these items melt on the cooktop they will damage the
ceramic cooktop.
Setting the keep warm control:
1. Push in either direction and turn the knob (See Fig 1).
The temperatures are approximate, and are designated
by hi and lo. However, the control can be set at any
position between hi and lo for different levels of
warming.
2. When ready to serve, turn the control to OFF. The keep
warm zone will remain warm until the indicator light
turns OFF. •Unlike the surface elements, the keep warm zone will
not glow red when it is hot. To avoid burns always use
potholders or oven mitts when removing food from the
cooktop including the keep warm zone as cookware
and plates will be hot.
•Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufficiently.
• Do not place flammable items such as plastic salt
and pepper shakers, spoon holders or plastic
wrappings on the cooktop when it is in use. These
items could melt or ignite. Potholders, towels or
wooden spoons could catch fire if placed too close to
the surface elements.

14
SETTING SURFACE CONTROLS
Home Canning
Be sure to read and observe all the following points when
home canning with your appliance. Check with the USDA
(United States Department of Agriculture) website and be
sure to read all the information they have available as well
as follow their recommendations for home canning
procedures.
CAUTION
• Use only quality flat bottom canners when home canning.
Use a straight-edge to check canner bottom (see
“Cookware material types” in the Before setting
surface controls section).
• Use only a completely flat bottom canner with no
ridges that radiate from the bottom center when home
canning using a ceramic cooktop.
• Make sure the diameter of the canner does not
exceed 1 inch beyond the surface element
markings or burner. It is recommended to use smaller
diameter canners on electric coil and ceramic glass
cooktops.
• Start with hot tap water to bring water to boil more
quickly.
• Use the highest heat seating when first bringing the water
to a boil. Once boiling is achieved, reduce heat to lowest
possible setting to maintain that boil.
IMPORTANT
NEVER place or straddle a cooking utensil over 2 different
surface cooking areas at the same time. This may cause
the ceramic cooktop to fracture.
IMPORTANT
Donotallowaluminumfoil,orANYmaterialthatcan
melttomakecontactwiththeceramicglasscooktop.
If these items melt on the cooktop they will damage the
ceramic cooktop.
•Radiant surface elements may appear to have cooled
after they have been turned off. The glass surface
may still be hot and burns may occur if the glass
surface is touched before it has cooled sufficiently.
• Do not place flammable items such as plastic salt
and pepper shakers, spoon holders or plastic
wrappings on the cooktop when it is in use. These
items could melt or ignite. Potholders, towels or
wooden spoons could catch fire if placed too close to
the surface elements.

15
OVEN CONTROL FUNCTIONS
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various keypad functions as described below.
Oven control (for models with Quick Bake™ only)
Broil pad— Use to select
the variable broil feature.
Up and down arrow pads— Use with the
feature or function pads to set oven
temperature, bake time, start time, clean time
(when programming an automatic start time),
setting or adjusting the clock and minute timer.
Bake pad—Use
to select the bake
feature.
Start time pad—
Used to set the desired
start time for baking &
Self-Clean. May be
used with bake time
to program a delayed
bake cycle.
Bake time pad—
Used to enter the
length of baking time
needed.
Self-clean pad—
Use to set a Self-
Clean cycle.
Oven, preheat & door locked lights — The "oven" light
will glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the Self-Clean cycle feature is active.
Feature indicator
lights— These lights
show which feature is
active.
Set clock pad—
Used to set the time
of day.
Cancel pad— Use to
clear any feature
previously entered
except the time of day
and minute timer. Press
cancel to stop cooking.
Also the cancel pad is
used to activate oven
door lockout setting.
Timer On/Off pad—
Use to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Also,
Timer On/Off pad is
used to set the
continuous bake
function.
Oven light pad—
Use to turn the
interior oven light
ON or OFF.
Quick Bake™ pad
activates the Quick
Bake™ feature.
Up and down arrow pads— Use with the
feature or function pads to set oven
temperature, bake time, start time, clean time
(when programming an automatic start time),
setting or adjusting the clock and minute timer.
Broil pad— Use to select
the variable broil feature.
Bake pad—Use
to select the bake
feature.
Start time pad—
Used to set the
desired start time
for baking & Self-
Clean. May be used
with bake time to
program a delayed
bake cycle.
Bake time pad—
Used to enter the
length of baking time
needed.
Self-clean pad—
Use to set a Self-
Clean cycle.
Oven, preheat & door locked lights — The "oven" light
will glow each time the oven turns on to maintain the set oven
temperature. The "preheat" light will glow when the oven is
first set to operate, or if the desired temperature is reset higher
than the actual oven temperature. The "door locked" light will
flash when the oven door locks and unlocks, the oven door
lockout is active or when the Self-Clean cycle feature is active.
Feature indicator
lights— These lights
show which feature is
active.
Set clock pad—
Used to set the time
of day.
Cancel pad— Use to
clear any feature
previously entered
except the time of day
and minute timer. Press
cancel to stop cooking.
Timer On/Off pad—
Use to set or cancel
the minute timer. The
minute timer does not
start or stop cooking.
Also,
Timer On/Off pad is
used to set the
continuous bake
function.
Oven light pad—
Use to turn the
interior oven light
ON or OFF.
Door lock icon pad
activates oven door
lockout settings.
Oven control (for all other models)

16
SETTING OVEN CONTROLS
Setting the clock
When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00". It is recommended to always set the
clock for the correct time of day before using the appliance.
NOTE
Changing temperature display (°F or °C)
The electronic oven control is set to display in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to display °C (Celsius) or
from °C to °F (control should not be set for Bake or
Self-clean when setting this feature):
1. Press . "— —" appears in the display.
2. Press and hold the until "HI" appears in the
display.
3. Press and hold until °F or °C appears in the
display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
Setting a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold . After 7
seconds, the control will beep once. This will block the
controls from sounding when a pad is pressed. To return
the sound, press and hold again for 7 seconds until
the control beeps once.
Changing between continuous bake
setting or 12-Hour Energy Saving feature
The oven control has a built-in 12-Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
Changingto continuous bake setting:
1. Press and hold down for 5 seconds until a tone
sounds, " — — hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the continuous bake setting, press
and hold for 5 seconds until a tone sounds.
"12hr" will appear in display indicating that the control
has returned to the 12-Hour Energy Saving feature.
To set the clock:
1. Press once (do not hold pad down).
2. Within 5 seconds, press and hold the or until
the correct time of day appears in the display.
The time of day cannot be changed when the oven or
self-clean is active.
NOTE
The temperature display feature cannot be changed
when the oven or self-clean is active.
Changing between continuous bake or the 12-Hour Energy
saving mode does not change how the cooktop controls
operate.
NOTE

17
Setting the minute timer
1. Press .
2. Press the to increase the time in one minute
increments. Press and hold the to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If the pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press
and hold the or to increase or decrease the time
remaining.
To cancel the minute timer before the set time has
run out
Press once .
NOTES
To set the oven lockout feature
(for models without Quick Bake feature)
1. Press and hold for 3 seconds. “Loc” will appear in
display, the “Door Locked” indicator light will flash and
the motor driven door lock will begin to close
automatically. Allow about 15 seconds for the oven
door to lock. Once the oven door is locked, the current
time of day will appear in the display.
2. To cancel the Oven Lockout feature, press and
hold for 3 seconds. The control will unlock the oven
door and resume normal operation.
NOTES
Setting oven lockout
The control can be programmed to lock the oven door and
lockout the oven control pads.
To set the oven lockout feature
(for models with Quick Bake)
1. Press and hold for 3 seconds. “Loc” will appear
in display, the “Door Locked” indicator light will flash
and the motor driven door lock will begin to close
automatically. Allow about 15 seconds for the oven
door to lock. Once the oven door is locked, the current
time of day will appear in the display.
2. To cancel the ovenlockout feature, press and
hold for 3 seconds. The control will unlock the oven
door and resume normal operation.
SETTING OVEN CONTROLS
• The indicator light located above the pad will
glow while the minute timer is active.
•To avoid possible damage to the oven door latch
mechanism, do not attempt to open or close the oven
door whenever the DOOR LOCKED indicator light is
flashing.
•If a control key pad is pressed when oven lockout is
active, Loc will appear in the display as a reminder that
the key pad action is not available when the oven
lockout feature is active.
•The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep
when the set time has run out. The timer may be used
alone or when any other oven function is active.
•The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display
will count down in minutes and seconds. Once the timer
has less than 1 minute remaining only seconds will
display.
•If the timer is active when oven cooking, the minute
timer will show in the display by default. To view
information of any other active oven function, press the
key pad once for the active function to view status.

18
SETTING OVEN CONTROLS
The oven may be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C). The factory preset
automatic bake temperature is 350°F (177°C).
To set bake
1. Press . "— — —" appears in the display.
2. Within 5 seconds, press the or . The display
will show "350°F (177°C)." By pressing and holding
the or , the temperature may be adjusted in
5°F increments (1°C if the control is set to display
Celsius).
3. As soon as the or keypad is released, the
oven will begin heating to the selected temperature.
When the displayed temperature reaches the desired
baking temperature, the preheat indicator light will turn
OFF. The control will beep 3 times as a reminder.
4. To stop bake, press .
Setting timed bake and delayed timed
bake features
The and pads operate the features that will
turn the oven ON and OFF at the times you select in
advance. The oven can be programmed to start
immediately and shut off automatically (timed bake) or to
begin baking at a later time with a delayed start time
(delayed timed bake).
Use caution with the timed bake and delayed timed bake
features. Foods that can easily spoil such as milk, eggs,
fish, meat or poultry, should be chilled in the refrigerator
first. Even when chilled, they should not stand in the
oven for more than 1 hour before cooking begins, and
should be removed promptly when cooking is completed.
Toprogram theoven to begin baking immediately
and to shut off automatically (timed bake)
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press . " — — — ° " appears in the display.
4. Within 5 seconds, press the or . The display will
show "350°F (177°C)." By holding the or , the
temperature can then be adjusted in 5°F increments
(1°C if the control is set to display Celsius).
5. Press . ":00" will appear in the display.
6. Press the or until the desired baking time
appears in the display.
7. The oven will turn ON and begin heating.
CAUTION
NOTES
NOTES
• A short time after starting bake the PREHEAT indicator
light will turn OFF, indicating your oven has reached
the set baking temperature. The control will sound 3
beeps as a reminder the oven is ready.
• The OVEN indicator light on the oven control display will
turn ON and OFF while using the Bake feature. This is
normal and indicates that the oven elements are cycling
to maintain the selected baking temperature.
•A bake time or start time setting cannot be added when
broiling.
•The bake time feature may be added when using Quick
Bake (some models).
•The maximum bake time setting is 11 hours & 59
minutes.
•While baking with a bake time setting, press the bake
time key pad to display any cook time remaining.
IMPORTANT
Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for
cakes, cookies and muffins.
To change the oven temperature after bake has
started
1. Press . Visually check the bake temperature at
this time.
2. Press the or pad to increase or decrease the
set temperature to the desired new oven temperature.
Setting bake

19
When the set bake time runs out
1. "End" will appear in the display window and the oven
will shut-off automatically.
2. The control will beep 3 times every 60 seconds as a
reminder until is pressed.
To change the oven temperature or bake time after
baking has started
1. Press the function pad you want to change.
2. Press the or to adjust the setting.
SETTING OVEN CONTROLS
To program oven for a delayed start time and to
shut-offautomatically(delayed Timed Bake)
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3. Press . " — — — ° " appears in the display.
4. Within 5 seconds, press the or . The display will
show "350°F (177°C)." By holding the or , the
temperature can then be adjusted in 5°F increments
(1°C if the control is set to display Celsius).
5. Press . ":00" will appear in the display.
6. Press the or until the desired baking time
appears.
7. Press . The time of day will appear in the display.
8. Press the or until the desired start time appears
in the display.
9. Once the controls are set, the control calculates the
time when baking will stop in order to start at the time
you have set.
10. The oven will turn ON at the delayed start time and
begin heating.
Use caution with the timed bake and delayed timed bake
features. Foods that can easily spoil such as milk, eggs,
fish, meat or poultry, should be chilled in the refrigerator
first. Even when chilled, they should not stand in the
oven for more than 1 hour before cooking begins, and
should be removed promptly when cooking is completed.
FOODPOISONINGHAZARD. Do notlet food sitfor more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
CAUTION
WARNING
Setting timed bake and delayed timed
bake features (cont’d)
NOTES
•A timed bake or start time setting cannot be added
when broiling.
•The maximum bake time or start time setting is 11
hours & 59 minutes.
•During a delayed timed bake operation the preheat
function will be delayed until the set time to start
cooking is reached.

20
SETTING OVEN CONTROLS
Quick Bake (some models)
Benefits of the Quick Bake feature
— Foods will cook faster, saving time and energy.
— Multiple rack baking.
— No special pans or bakeware needed.
How Quick Bake works
Quick Bake uses a fan to circulate the oven's heat
uniformly and continuously around the oven. This improved
heat distribution allows for fast, even cooking and browning
results. It also gives better baking results when using two
racks at the same time.
Heated air flows around the food from all sides, sealing in
juices and flavors. Meats cooked with Quick Bake are
juicer. Poultry is crisp on the outside while staying tender
and moist on the inside. Breads and pastry brown more
evenly. Most foods baked in a standard oven can be cooked
faster and more evenly with Quick Bake.
Suggestions for Quick Bake
Whenbaking
•For optimum cooking results it is recommended to
preheat the oven when baking foods such as cookies,
biscuits and breads.
•Reduce oven temperature 25°F from recipe’s
recommended oven temperature. Follow the remainder
of the recipe’s instructions using the minimum
recommended cook time.
•When using 2 oven racks at the same time, place in
positions 2 & 5 for best results (See Fig. 1).
When roasting
•Preheating is not necessary when roasting foods using
QuickBake.
•Since Quick Bake cooks food faster, reduce the cook
time by 25% from the recommended cook time of your
recipe. Check the food at this time. If necessary,
increase cook time until the desired doneness is
obtained.
•Do not cover foods when dry roasting - this will prevent
the air from circulating around the food.
Fig. 1
6
1
2
3
4
5
7
Setting Quick Bake
The oven can be programmed to Quick Bake at any
temperature from 170°F to 550°F (77°C to 287°C). The
factory preset automatic bake temperature is 350°F
(177°C).
Toset QuickBake
1. Press . "— — —" appears in the display.
2. Within 5 seconds, press the or . The display
will show "350°F (177°C)." By pressing and holding
the or , the temperature can then be adjusted
in 5°F increments (1°C if the control is set to display
Celsius).
3. As soon as the or pad is released, the oven
will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel quick bake, press .
To change the oven temperature after Quick Bake
has started
1. Press .
2. If necessary, press the or pad to increase or
decrease the oven set temperature .
NOTES
• Layer cakes will have better results using the pad.
• When using Quick Bake (some models) cook time
reductions may vary depending on the amount and type
of food being cooked.