Frigidaire FRS26ZXHW2 User manual

P/N 218955101 (0101)
Versión en español ..................................... 2
Product Registration................................... 2
Important Safety Instructions ................2-3
First Steps ................................................3-4
Energy Saving Ideas................................... 5
Setting the Controls .................................... 5
Fresh Food Storage..................................... 6
Automatic Ice and Water Dispenser ......7-9
Care and Cleaning .............................. 10-11
Removing the Handles and Doors .... 11-12
Avoid Service Checklist...................... 13-16
Normal Operating Sounds ....................... 16
Warranty .................................................... 17
Service Information (Canada).................. 18

2
Product Registration Record Your Model and Serial Numbers
Record the Model No. and Serial No. of this refrigerator in the spaces provided
below. These numbers are found on the serial plate located on the ceiling of the
refrigerator compartment.
Model No. __________________________________________________
Serial No. ___________________________________________________
Register Your Product
Theself-addressedPRODUCTREGISTRATIONCARDshouldbefilledincompletely,
signed and returned to the Electrolux Home Products.
© 2001 White Consolidated Industries, Inc.
All rights reserved.
Versión en español
Si desea obtener una copia en español de
este Manual del Usuario, sírvase escribir la
dirección que se incluye a continuación.
Solicite la P/N 218955200.
Spanish Owner's Guides
Electrolux Home Products
P.O. Box 212378
Augusta, GA 30917
Proper Disposal of Your
Refrigerator/Freezer
Risk of child entrapment.
Child entrapment and suffocation are
not problems of the past. Junked or
abandoned refrigerators are still
dangerous-eveniftheywillsitfor"just
a few days." If you are getting rid of
your old refrigerator, please follow
instructions below to help prevent
accidents.
BEFOREYOUTHROW
AWAY YOUR OLD
REFRIGERATOR OR
FREEZER:
• Take off doors.
• Leave shelves in
place, so children
may not easily
climb inside.
For Your Safety
Donotstoreorusegasolineorotherflammablevaporsandliquidsinthevicinityof
this,oranyotherappliance. Readproduct labels for flammability and other warnings.
• Destroy carton, plastic bags, and any exterior wrapping material immediately
aftertherefrigeratorisunpacked.Childrenshouldneverusetheseitemsforplay.
Cartons covered with rugs, bedspreads, plastic sheets, or stretch wrap may
become airtight chambers that can quickly cause suffocation.
• Remove all staples from the carton. Staples can cause severe cuts, and ruin
finishes if they come in contact with other appliances or furniture.
• Anempty,discardedicebox,refrigerator,orfreezerisaverydangerousattraction
to children. Remove door of any appliance that is not in use, even if it is
being discarded.
Theseguidelinesmustbefollowedtoensurethatsafetymechanismsinthe
design of this refrigerator will operate properly.
•Refrigerator must be plugged into its own 115 Volt, 60 Hz, AC only
electrical outlet. The power cord of the appliance is equipped with a three-
prong grounding plug, for your protection against shock hazards. It must be
pluggeddirectlyintoaproperlygroundedthree-prongreceptacle.Thereceptacle
must be installed in accordance with local codes and ordinances. Consult a
qualified electrician. Do Not Use An Extension Cord Or An Adapter Plug.
• Ifvoltagevariesby10percent ormore,performanceofyourrefrigeratormaybe
affected. Operating the refrigerator with insufficient power can damage the
compressor.Suchdamageisnotcoveredunderyourwarranty.Ifyoususpectyour
voltage is high or low, consult your power company for testing.
• Topreventtherefrigeratorfrombeingturnedoffaccidentally,donotplugtheunit
into an outlet controlled by a wall switch or pull cord.
• Do not pinch, knot, or bend the power cord in any manner.
Important Safety
Instructions
Read all instructions before
using this refrigerator.
Child Safety
ElectricalInformation
Avoid fire
hazardorelectricshock.Do
notuseanextensioncordor
an adapter plug. Do not
remove any prong from
powercord.

3
First Steps This Owner’s Guide provides specific operating instructions for your model. Use
refrigeratoronlyasinstructedinthisOwner’sGuide. Beforestartingrefrigerator,
follow these important first steps:
Location
Install refrigerator:
• neara grounded electrical outlet. DO NOT use an extension cord or an adapterplug.
• outofdirectsunlightandawayfromrange,dishwasher,orotherheatsources,
if possible.
• onafloorthatislevelandstrongenoughtosupportafullyloadedrefrigerator.
• where a water supply is available for automatic ice maker.
Installation
• Do not install refrigerator where temperature will drop below 60°F (15°C), or
rise above 110°F (43°C). Compressor will not be able to maintain proper
temperatures.
• In a recessed installation, allow an extra 1/2 inch (10-15 mm) on each side for
ease of installation.
• If the hinge side of the unit will be placed against a wall, allow a 1-3/4 inch (44
mm) space between wall and refrigerator to permit proper door swing.
Door Opening
For best use of drawers and freezer basket, refrigerator should be in a position
where both the refrigerator and freezer doors can be opened about 135°.
Leveling
• Refrigerator must be leveled with all bottom corners resting firmly on a solid
floor. Adjust front rollers to level cabinet both front-to-rear and side-to-side.
Keepcabinet aslowaspossible forstability. Neveradjustcabinet rollerssofront
is lower than rear.
•Toadjust frontrollers: Openrefrigeratorand freezerdoors.Removetoegrille
by pulling it straight out. Adjust rollers by turning each roller adjusting bolt with
an adjustable wrench, a socket wrench, or a nutdriver until refrigerator is level
and stable. Rear rollers are not adjustable.
• Check both doors to be sure seals touch cabinet evenly on all four sides.
• Iffreezerdoorishigherthanrefrigeratordoor,raiserightcornerand/orlowerleft
corner until doors align across top of cabinet.
• Ifrefrigeratordoorishigherthanfreezerdoor,raiseleftcornerand/orlowerright
corner until doors align across top of cabinet.
•To replace toe grille: Line up tabs with holes, and push grille straight on.
Cleaning
• Wash the inside, all removable parts, and the outside with mild detergent and
warm water. Wipe dry. Do Not Use Harsh Cleaners On These Surfaces.
•Do Not use razor blades or other sharp instruments that can scratch appliance
surface, when removing adhesive labels. Any glue left from the tape or energy
labelcanberemovedwithamixtureofwarmwaterandmilddetergent,ortouch
glue with sticky side of tape already removed.
•Do Not Remove Serial Plate.
Adjusting Front Rollers
ROLLER ADJUSTING
BOLT
Replacing Toe Grille
Important Safety
Instructions(continued) • Neverunplugtherefrigeratorbypullingonthepowercord.Alwaysgriptheplug
firmly, and pull straight out from the receptacle.
• To avoid electrical shock, unplug the refrigerator before cleaning and before
replacingalightbulb. NOTE: Turningthecontrol toOFFturnsoffthecompressor,
butdoesnotdisconnectpowertothelightbulborotherelectricalcomponents.
• Do not operate the refrigerator in the presence of explosive fumes.
• Avoid contact with any moving parts of the automatic ice maker.
Other Precautions

4
First Steps
(continued) Connecting Ice Maker to Water Supply
Do Not Install Ice Maker Tubing Where Temperature May
Fall Below Freezing.
Check to be sure your water connection will comply with local plumbing codes.
Water quality determines your ice quality. It is best to connect the ice maker to
water that is not softened. Chemicals from a malfunctioning softener can
damage the ice maker. If the ice maker is connected to soft water, ensure that
the softener is maintained and working properly.
The ice maker requires a 1/4 inch (6.4 mm) copper water supply line (with
shutoff)fromyour household water system.Allowenough tubing behind your
refrigeratorto permitmoving out to clean floor.
Water line kit 5308950117 is available through your dealer at extra charge. This
kit includes 25 feet (7.6 meters) of 1/4 inch diameter copper tubing, plus parts to
connect to your cold water line, including a saddle valve assembly. You will need
to purchase a 1/4 inch brass compression nut and ferrule from your local hard-
wareor plumbing store.
1. Turn ON water supply and flush out copper tubing. Turn off water supply.
2. Unplugrefrigerator.
3. Install WATER SUPPLY LINE as follows (figure 2):
• Slide brass nut, then ferrule, onto copper tubing.
• Push end of copper tubing as far into the metal water valve fitting as it will
go (1/4 inch). Slide ferrule into fitting and thread brass nut onto inlet,
tightenfinger tight plus 1/2 turnwith wrench.
NOTE: Some models may have a cap on the valve. Unscrew the cap and
discard.
4. Secure copper tubing with STEEL CLAMP and screw to rear panel at location
shown (Figure 3).
5. Coil water supply tubing as shown (figure 3).
NOTE: To prevent vibration noise and wear, leave a space between all tubing
andother surfaces.
6. Turn on water supply and check all connections for leaks (figure 3).
7. Plugrefrigeratorcord intowall outlet.
8. To begin ice production, lower the Wire Signal Arm to the “down” or “ON”
position(Figure 4).
IMPORTANT
Ice production will begin when freezer reaches normal operating temperature.
Air in new plumbing lines may cause ice maker to cycle two or three times
before making a full tray of ice.
New plumbing may cause ice to be discolored or have poor flavor. Discard ice
made during the first 24 hours. After installation, if you wish to shut the ice
maker off, lift the Wire Signal Arm until it clicks and locks in the “UP” position.
Figure1
Figure2
Figure3
Figure4

5
• Installtherefrigeratorinthemostcoolpartoftheroom,outofdirectsunlightand
away from heating ducts or registers. Do not place the refrigerator next to heat-
producing appliances such as a range, oven or dishwasher. If this is not possible,
asectionofcabinetryoranaddedlayerofinsulationbetweenthetwoappliances
will help the refrigerator operate more efficiently.
• Level the refrigerator so the doors close tightly.
• Refer to this Owner's Guide for the suggested refrigerator settings.
• Periodic cleaning of the condenser will help the refrigerator run more efficiently.
See Outside in the Care and Cleaning section.
• Do not overcrowd the refrigerator or block cold air vents. Doing so causes the
refrigeratorto run longerand use more energy. Shelves should not be lined with
aluminum foil, wax paper or paper toweling. Liners interfere with cold air
circulation, making the refrigerator less efficient, which could cause food
spoilage.
• Coverfoodsandwipecontainersdrybeforeplacingthemintherefrigerator.This
cuts down on moisture build-up inside the unit.
• Organize the refrigerator to reduce door openings. Remove as many items as
needed at one time and close the door as soon as possible.
Setting the Controls Cool Down Period
Toensuresafefoodstorage,allowtherefrigeratortooperatewiththedoorsclosed
for at least 8 to 12 hours before loading with food.
Refrigerator Control
• Therefrigeratorcontrolshouldbesetatthemidpointofthedialforatrialperiod
of 24 hours.
• After 24 hours, adjust the control as needed. For colder temperatures, turn the
dial a notch toward COLDEST. For warmer temperatures, turn the dial a notch
toward COLD. Adjust temperatures by one increment at a time.
Freezer Control
• The freezer control should be set at the midpoint of the dial for a trial period of
24 hours.
• After 24 hours, adjust the control as needed. For colder temperatures, turn the
dial a notch toward COLDEST. For warmer temperatures, turn the dial a notch
toward COLD. Adjust temperatures by one increment at a time.
NOTE: Whenfirstsettingthecontrolsorwhenchangingasetting,wait24hoursfor
the temperature to stabilize before making additional changes.
Turning the freezer control may change temperatures in both compartments. For
example,if thefreezercontrolis turnedtoacolder setting,therefrigeratorcontrol
may have to be adjusted to a warmer one. Turning the refrigerator control will
change only the refrigerator temperature.
IMPORTANT: If the freezer control is turned to OFF, cooling stops in both
compartments.
You may hear the "Frost Free" system working. A fan circulates air in the
refrigerator and freezer compartments. For good circulation and maintenance of
proper cooling temperatures, do not block cold air vents with food items. Water
draining into the defrost water pan and hissing sounds are normal during the
automatic "Frost Free" cycle.
Energy Saving Ideas
C05C0063
Refrigerator midpoint
Freezer midpoint

6
Fresh Food Storage Shelf Adjustment
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting
shelves,removeallfood.Theshippingclipswhichstabilizetheshelvesforshipping
may be removed and discarded.
To adjust the cantilever shelves (shelves supported at the rear of the refrigerator),
lift the back of the shelf up and out. Replace shelf by inserting hooks at rear into
slots. Lower and lock into position. Some models have Spillsafe™ glass shelves,
which catch and hold accidental spills.
Door Storage
Doorbinsandshelvesareprovidedforconvenientstorageofjars,bottlesandcans.
Items used often are available for quick selection.
Thedoorbinscanbemovedtosuitindividualneeds.Removebinsbyliftingstraight
up. Place bins in the desired position and lower over the supports.
The Dairy compartment is warmer than the general food storage section and is
intended for short term storage of cheese, spreads, or butter.
Crisper
TheCrisperdrawer,locatedunderthebottomrefrigeratorshelf,isforstoringfruits
andvegetables.Mostproduceshouldbewashedinclearwateranddrainedbefore
placinginthisdrawer.Itemswithstrongodorsorhighmoistureshouldbewrapped
before storing.
The Humidity Control (some models) allows you to adjust the humidity within the
Crisperdrawer.Thiscanextendthelifeoffreshvegetableswhichkeepbestinhigh
humidity. Leafy vegetables, however, keep best when stored with the Humidity
Control set on HIGHER, or in a drawer without a Humidity Control. This keeps
incoming air to a minimum and maintains maximum moisture content.
Meat Keeper
The Meat Keeper is located at the bottom of the refrigerator. The temperature in
this compartment can be made colder than the rest of the refrigerator compart-
mentbyslidingtheChilledAir Control knob within theCOLDEST orCOLDrange.
Meat will be partially frozen and may be kept fresh longer than if stored on a
refrigerator shelf.
BeforeplacingitemsintheMeatKeeper,followthesestepstokeepthemeatfresh:
1. Carefully handle meat with clean hands and always keep the compartment
clean.
2. Store meat in its original wrapper. If necessary, overwrap in plastic wrap or foil
to prevent drying. Wrap fish tightly to prevent odor transfer to other foods.
3. If spoilage ever occurs, disinfect the compartment with liquid chlorine bleach
followinglabel directions. Then rinse with a solution of baking soda and water.
Rinse with clear water and dry.
Remove Shipping Clips
FRESH FRUITS & VEGETABLES
LOWER
FRUITS
HIGHER
HUMIDITY CONTROL
VEGETABLES
Humidity Control
Chilled Air Control Freezer Basket
A slide-out wire basket (some models have two) hangs below the bottom freezer
shelf. This basket provides easy access to frozen food packages.
Tall Storage Compartment(some models)
A shelf is attached to the freezer wall just below the ice server. This allows for
convenient storage of tall items placed vertically between the ice server and the
freezer wall.
Tall Storage
Compartment

7
Automatic Ice and
Water Dispenser Theiceandwaterdispenseronthefreezerdoorconvenientlydispenseschilledwater,
and either ice cubes or crushed ice, depending on the model.
To operate the dispenser, slide the knob to the selection of your choice and press
a glass against the dispensing arm, as shown. Be sure to hold the glass as far up as
possible to catch all ice. To stop dispensing, pull glass away from dispensing arm.
When dispensing ice, release the dispensing arm before the glass is full, but do not
remove the glass until the ice has completely dispensed.
Asmallheatedareabeneaththedispenserfloorcatchesandevaporatessmallspills.
This drip tray is removable and dishwasher safe. Do not pour water or excess
cubes into this area because there is no drain.
Light
The dispenser has a light which can be turned on and off by sliding the knob to the
desired position. The light also turns on automatically when ice and/or water is
dispensed. Replace light bulb with an appliance bulb of the same wattage.
How the Water Dispenser Works
The water tank is located behind the drawers in the refrigerator compartment. As
thewaterisdispensed,thetankisautomaticallyrefilled.Forproperoperationofthe
dispenser, the supply water pressure must fall between 30 psi and 120 psi.
After the refrigerator is installed and the plumbing connections are complete, the
water tank should be filled by drawing one glass of water. It may take
about 1-1/2 minutes after depressing the dispenser arm before water works its
way through the plumbing connections and begins to fill this first glass. Draw and
discard7moreglassestobesurethatthetankandplumbingconnectionsarerinsed
of any impurities. The water delivery system has a built in shut off device that will
stopthewaterflowafter3minutesofcontinuoususe.Simplyrelease the actuator
buttonto reset the dispensing mechanism.
To ensure fresh-tasting water, plan to use the dispenser every day. If the water
dispenser has not been used for a week or more, draw and discard 7-8 glasses to
freshen the tank supply.
How the Ice Dispenser Works
The ice maker and ice storage bin are located in the top left corner of the freezer
compartment. After the refrigerator is installed properly and has cooled for several
hours,the ice maker can begin making ice. To begin ice production, lower the wire
signalarmtothe"down"orONposition.Ascubesare made,theyare storedinthe
storagebin.Withnousageitwilltakeapproximately2daystofillthebin.However,
the dispenser may be used after the first batch of ice is made. The ice maker turns
off automatically when the ice storage bin is full.
Because of new plumbing connections, the first production of ice cubes may be
discolored or have an odd flavor. These should be discarded until the cubes made
are free of discoloration and taste. Remember that water quality
determines your ice quality. It is best to connect the ice maker to water that is not
softened. Chemicals from a malfunctioning softener can damage the ice maker.
If ice maker is connected to soft water, ensure the softener is maintained and
workingproperly.
To stop the ice maker, lift the wire signal arm until it clicks and locks in the "up"
or OFF position.
Dispenser Selector
Press glass against dispensing arm.

8
Do not use the ice
chute as a handle when removing
or replacing the ice storage bin.
Surfaces there may be sharp.
WARNING
Ice Dispenser Tips
1. Ice cubes stored too long may develop an odd flavor. Empty the container and
return it to the proper position. The ice maker will then produce more ice.
2. Occasionally shake the container to keep ice separated.
3. Ifthedispensingarmispushedinformorethan4minutes,thedispensermotor
may overload and stop. The overload protector will reset automatically after 3
or4 minutes. If a large quantityoficeisneededatonetime, it is best to remove
cubes directly from the ice storage bin.
4. Certain sounds are normal when the ice maker is operating. They are:
• Motor operation
• Ice being loosened from the tray
• Ice dropping into the storage bin
• Running water
• Water valve opening or closing
For more information on these operations, see Normal OperatingSounds.
5. Stop the ice maker when cleaning the freezer or for long vacations.
6. Iftheicemakeristobeturnedoffforalongperiodoftime,turnthewatersupply
valve to the closed position.
Automatic Ice and
Water Dispenser
(continued)
Cleaning the Ice Dispenser
Clean the dispenser and ice storage bin at regular intervals, particularly before you
take a vacation or move, or if the ice dispenser sticks.
1. Stop ice production by lifting the wire signal arm to the "up" or OFF position.
2. Remove ice storage bin by lifting up and out. Empty and carefully clean the bin
with milddetergent. Do not submerge the bin while cleaning. Rinse with clear
water. Do not use harsh or abrasive cleaners. Allow ice bin to dry completely
before replacing in the freezer.
3. Remove ice chips and clean the shelf and chute that supports the ice storage
bin.
4. Replace the ice storage bin. Lower the wire signal arm on the ice maker to the
"down" or ON position and the ice maker will resume production.
IMPORTANT: Whenremovingorreplacingtheicebin,donotrotatetheaugerin
theicebin.Iftheaugerisaccidentallyturned,youmustrealigntheaugerbyturning
it in 90° turns until the ice bin fits into place with the drive mechanism. For further
instruction, see the label on the ice bucket.
Remove and empty the ice storage bin if:
1. An extended power failure (one hour or longer) causes ice cubes in the ice
storage bin to melt and freeze together and jam the dispenser mechanism.
2. Theicedispenserisnotusedfrequently.Icecubeswillfreezetogetherinthebin
and jam the dispenser mechanism. Remove the ice storage bin and shake to
loosen the cubes.
NEVER use an ice pick or similar sharp instrument to break up the ice. This could
damage the ice storage bin and dispenser mechanism.
Repositioning the Auger
AUGER
DRIVER
MECHANISM
DO NOT PUT FINGERS UP ICE CHUTE.
SURFACES THERE MAY BE SHARP.
SystemStartup:
Water supply does not need to be turned off, however do not use ice and water
dispenserwhileinstallingfilter. RefertoFigure1asyoucompletetheseinstructions.
Thefiltercartridgehasalreadybeeninstalledinthefilterhousingatthefactory.Refer
to the How the Dispenser Works section to properly fill the system with water.
PureSourcePlus™ Ice and Water Filter (some models)
NOTE: If you purchased a refrigerator with a PureSource Plus™Ice and
Water filter, please read the following use and care information.
Thisice and water filtersystem filters water to your ice makerand water dispenser.
Itislocatedintheupperrightbackcornerofthefreshfoodcompartment(seeFigure
1 on the following page).

9
Ordernewfilter cartridgesthrough the
dealer where you bought the
refrigerator, or contact the Frigidaire
Consumer Assistance Center at 1-800-
944-9044. It might be good to order
some filters when you first install your
refrigerator. Be sure to ask for the RC-
200 PureSource Plus™ replacement
cartridge.
Automatic Ice and
Water Dispenser(continued)
Changing the Filter:
Waterquality variesthroughouttheworld. Toensure thehighestpossible
water quality, change water filter every 6 months, or 200 gallons. Also, if
filter has been in a refrigerator that has not been in use for awhile (during
moving for example), change filter before reinstalling refrigerator. Note
dispenser system will also operate without filtration (with filter cartridge
removed).
To change filter:
RefertoFigure1asneeded.Itisnotnecessarytoturn the water supply off
to change the filter.
1. Set ice maker lever (wire signal arm) to the OFF (up) position.
2. Hold filter cup firmly, and unscrew counter clockwise (Figure 1). (Some
watercouldleakoutasyou removecup.Thisisnormal.) Filtercartridge
shouldcomedownwithcup. Ifcartridgeremainsinhousing,pulldown
gently, while twisting filter back and forth.
3. Empty cup of any substance.
4. The large o-ring (Figure 1) that seals the filter system sets in the o-ring
groove down inside the cup. Should the o-ring fall out during filter
cartridge replacement, simply place it back in the groove prior to
screwingthecupbackinplace.Iftheo-ringbecomesdamaged,youwill
need to order a new one from the Consumer Assistance Center.
5. Discard old filter cartridge.
6. Remove new filter cartridge from packaging, and install.
7. Place filter cartridge in cup. The end with the small o-ring should be up,
out of the cup.
8. Screw cup, with filter, back onto housing. Do Not Use Wrench To
ReinstallCup.Filtercartridgewillself-alignascupistightened.Besure
cup is completely tightened with PureSource Plus ™ Logo facing
outward.Do Not Tighten Past Stop.
9. Set ice maker level on the ON (down) position.
10.Checkforleaks.Openrefrigeratordoor.Wipeanywaterdropsfromthe
filtercup. Run a glassof water. If there is a leak,unscrew filter cup, and
reinsert the filter cartridge. Check placement of large O-ring (see
Figure1). Reinstall filter cup, making certain it is tightened completely.
11.To condition filter system and purge air from water line, run several
glasses of water through water dispenser. This will also assure that the
purest water possible is stored in water tank.
The PureSource Plus™ RF-200 ice and
waterfiltersystemistestedandcertified
by NSF International, the nationally
recognizedandrespected,notforprofit,
certification organization for public
health safety. The PureSource Plus™
system is tested and certified to ANSI/
NSF Standards 42 and 53. See
performance data sheet for specific
claims.Thissystemshouldnotbeusedon
waterthatis microbiologicallyunsafe or
with water of unknown quality unless
the water has been adequately
disinfected before or after traveling
through the filtration system.
Rated service flow- .37 GPM
Maximum Rated Pressure- 125 PSI
Maximum Operating Temp. - 100°Figure1

10
Care and Cleaning Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspills
immediately and clean both sections at least twice a year. Never use metallic
scouringpads,brushes,abrasivecleanersorstrongalkalinesolutionsonanysurface.
Do not wash any removable parts in a dishwasher.
Always unplug the power cord from the wall outlet before cleaning.
NOTE:TurningthecontroltoOFFdoesnotdisconnectpowertothecontrols,lightbulb,
orother electrical components.
Inside
Washinsidesurfacesoftherefrigeratorandfreezerwithasolutionof2tablespoons
baking soda in 1 quart warm water. Rinse and dry thoroughly. Be sure to wring
excesswateroutofspongeorclothbeforecleaningaroundthecontrols,light
bulb, or any electrical parts.
Washremovablepartssuchasshelvesanddrawerswithbakingsodasolutionormild
detergentandwarmwater.DoNotUseHarshCleanersOnTheseSurfaces.Rinse
anddrythoroughly.Cleanthedoorgasketswithmildsuds,rinsewithclearwaterand
wipedry. DoNot userazorbladesorothersharpinstrumentswhichcanscratchthe
appliance surface when removing adhesive labels. Any glue left from the tape or
energy label can be removed with a mixture of warm water and mild detergent, or,
touch the glue with the sticky side of tape already removed. Do Not Remove The
SerialPlate.
Outside
Washthecabinetandhandleswithwarmwaterandmildliquiddetergent.Rinsewell
and wipe dry with a clean soft cloth. Do not use commercial household cleaners,
ammonia, or alcohol to clean handles.
Removeanydustordirtfrom the front of the toe grille using avacuumcleanerwith
itsdustingtoolattachment.Removethetoegrillebypullingitstraightout.Whilethe
grille is removed, vacuum the backside of the grille and wipe with a sudsy cloth or
sponge. Periodically clean the condenser (black tubes and wires beneath the
refrigerator,behindthetoegrille).Donotallowlintordusttoaccumulateonthecoils.
Insert a long handled brush or vacuum attachment between the two coils to bring
thelintforward.Toreplacethetoegrille,lineuptabswithholesandpushgrillestraight
on. Use caution when cleaning in the area of the coils. Surfaces
there may be sharp.
The air vents on the lower access panel at the rear of the refrigerator should be
cleanedperiodically.Cleantheventsbyusingavacuumcleanerwithitsdustingtool
attachment. When moving the refrigerator, pull straight out. Do not shift the
refrigeratorfromsidetosideasthismay tearorgougethefloorcovering.Becareful
not to move the refrigerator beyond plumbing connections.
Damp objects stick to cold
metalsurfaces. Do not touch refrigerated
surfaces with wet or damp hands.
To avoid damage and help
the refrigerator run as efficiently as
possible, clean the condenser and air
vents periodically.
Air Vents on Lower Access Panel
Replacing the Light Bulb
To replace the light bulb in either compartment:
1. Unplug the refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Replace old bulb with an appliance bulb of the same wattage.
4. Remember to plug the refrigerator back in.
Vacation and Moving Tips
Short vacations:
• Leave refrigerator operating during vacations of 3 weeks or less.
• Use up all perishable items in refrigerator section.
• Wrap and store other items in the freezer.
• Turn off automatic ice maker, even if you will be gone just a few days.