Frigidaire FRT18SJGW0 User guide

17
SERVICE DATA SHEET 218758400
STANDARD - AUTOMATIC DEFROST TOP FREEZER MODELS
ATADECNAMROFREP GNITTESLORTNOCTNIOP-DIMTASGNINEPOROODONDNADAOLON
htiWAepyT
roticapaCnuR
htiWBepyT
roticapaCoN
tneibmAF°56
BepyTAepyT
tneibmAF°09
BepyTAepyT
emiTgnitarepO%54ot03%54ot53%56ot45%76ot55
erutarepmeTrezeerFF°8ot°0F°6ot°0F°6ot°0F°6ot°0
erutarepmeTrotaregirfeRF°04ot°53F°04ot°53F°04ot°53F°04ot°53
)ni-tuc(erusserPediSwoLgisp31ot6gisp9ot6gisp31ot6gisp9ot6
))tuo-tuc(erusserPediSwoLgisp2+ot2-gisp2+ot2-gisp3+ot2-gisp2+ot2-
GISP-erusserPediShgiH
)elcycfo3/1tsaL(
511ot501511ot501581ot061581ot061
)elcycfo3/1tsaL(egattaW002ot051022-091002ot051022-091
)gninnuR(spmA8.1ot3.16.2ot2.28.1ot3.16.2ot2.2
egatloVesaBCAV511CAV511CAV511CAV511
SNOITACIFICEPSTSORFED
eziStenibaC tatsomrehTretaeH
ni-tuCtuo-tuCsttaWsmhO
'71ot'31F°52+F°74+00433
'81F°52+F°74+57482
emiTnuRrosserpmoCfosruoH8yrevEsetuniM12tsorfeD
ROTOMNAFRESNEDNOC
sttaWMPRspmA
3.2tfahSetisoppOWC0031gninnuR51.
REPMADCITATSOMREHT
nepOlluFdesolC
F°2-/+F°33F°2-/+F°22
SNOITACIFICEPSREKAMECI
lacirtcelEstloV511ztreH06
tatsomrehTF°84tasnepOF°51tasesolC
egattaWretaeH561
IMPORTANT SAFETY NOTICE
The information provided herein is designed to assist qualified repair
personnel only. Untrained persons should not attempt to make repairs
due to the possibility of electrical shock. Disconnect power cord before
servicing.
IMPORTANT
If any green grounding wires are moved during servicing, they must
be returned to their original position and properly secured.
CAUTION: System parts must be removed from cabinet before
brazing. All electrical parts and wiring must be shielded from torch
flame. Do not allow torch to contact insulation; it will char at 200°F
and flash ignite (burn) at 500°F. Excessive heat will distort the
plastic liner.
ICE MAKER INFORMATION
Test Cycling
Remove cover by inserting screwdriver in notch at bottom and prying
cover from housing. Use a screwdriver to rotate motor gear counter-
clockwise until holding switch circuit is completed. All components of
ice maker should function to complete the cycle.
Water Fill Volume
The water fill adjustment screw will change the fill time. One full turn is
equal to 20cc (.68 oz.). The correct fill is 90 to 120cc (3.0 to 4.0 oz.).
When a water valve is replaced, the fill volume must be checked.

18