Frigidaire fwx233re User manual

OPERATING INSTRUCTIONS
Operating Steps
Read Washing Procedures in your Owner's
Guide. It explains these operating steps in
detail.
1. Sort laundry into loads that can be
washed together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent
to wash tub.
5. If desired, add diluted liquid bleach to
Bleach Dispenser.
6. Add laundry load to wash tub.
7. Set cycle selector and washer controls
according to type, size, and soil level of
each load.
BeforeOperatingYourWasher
Read your washer Owner's Guide. It has
important safety and warranty information. It
also has many suggestions for best washing
results.
To reduce the risk of fire, electric
shock,orinjurytopersons,readtheIMPORTANT
SAFETY INSTRUCTIONS in your washer
Owner's Guide before operating this appliance.
FWX233RE
8. Close lid and pull cycle selector knob to
start washer.
9. If desired, add diluted liquid fabric
softener during the final rinse.
10.Remove items at end of cycle. Wait
about 1 minute for safety lid lock to release.
CycleSelection
Alwaysfollowinstructionson fabriccare labels.
The Regular, Perm Press and Knits & Delicates
cycles provide a spray rinse during the first
spin, followed by a deep rinse and final spin.
Regular Cycle
Provides up to 15 minutes of wash agitation
for most fabrics.
(continued, reverse side)
P/N131665500 (9703)Printed in U.S.A.
Versión en español
Si desea obtener una copia en español de
estas Instrucciones de Funcionamiento,
sírvase escribir a la dirección que se incluye a
continuación. Solicite la P/N 131597800.
Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio 43017-0961

Energy Saving Tips
•Wash full loads. Oversize loads use extra
energy. Undersize loads waste energy.
•When small wash loads cannot be avoided,
use lower water levels.
•Select the appropriate cycle and time for each
load. Shorten wash times for lightly soiled
loads.
•To reduce drying time, select a fast spin speed
to remove more water from heavy items such
as towels and jeans.
•Use warm water to wash most loads. Limit hot
water washes to heavily soiled and white
loads. Use cold water for lightly soiled items
and rinsing.
•Operate the washer in early morning and late
evening when utility demands are low.
•Follow proper laundry procedures to avoid
rewashing.
CycleSelection(continued)
Perm Press Cycle
Provides up to 12 minutes of wash agitation for
cottons and blends with a no-iron finish.
Knits & Delicates Cycle
Provides 8 minutes of wash/pause agitation for
the gentle care of knit and delicate items.
Always set the Knits & Delicates cycle to begin
at the START position.
Controls
Always follow instructions on fabric care
labels.
WASH/RINSE TEMPERATURE sets the water
temperatures for washing and rinsing. Select
wash water temperature according to fiber
content and soil level of the load, and type of
detergent used. A cold water rinse saves energy
and reduces wrinkling.
The following chart suggests wash/rinse
temperatures for basic fabric types.
Wash/Rinse
Fabric Type Temperature
Heavily soiled white/colorfast Hot/Cold
cotton, perm press
Lightly soiled white/colorfast Warm/Cold
cotton, perm press
Noncolorfast fabrics, knits, Cold/Cold
delicates, washable woolens
LOAD SIZE sets the amount of wash and rinse
water for the wash load. Select a water level
appropriate for the load size. There should be
enough water for items to move freely.
P/N131665500 (9703)