Froggit DP2000 User manual

DP2000
3-In-1 WiFi Gateway
Manual EN
Support/updates/manuals/spare parts:
www.froggit.de

The following optional
sensors (purchased separately
If you have purchase extra sensors, ust simple
the data automatically. If
search the data after one hour
the sensor manual
(provided
This table shows the maximum number of each type of
Sensor
DP50 Multi-channel
temperature and
humidity sensor
DP100 oil moisture sensor
DP200 PM2.5 air quality sensor
DP70 Water leak alarm
DP60 Thunder and lightning
DP250 Indoor PM2.5/PM10
CO2
quality sensor
temperature/humidty
DP10 Leaf wetness sensor
* the data won’t
be displayed on the main
screen, it will show its data on the
Channel Data page.
Sensor
DP35 stainless-steel probe
thermometer
for soil and water
DP150 wire probe thermometer
for
DP35 and DP150 share the 8
channels
sensors (purchased separately
) can be used with DP2000
console display.
If you have purchase extra sensors, ust simple
power up, the display console
sensor not reporting in to console, t
he display console will re
search the data after one hour
or restart the console
to search the data.
(provided
separately with sensor) for details.
This table shows the maximum number of each type of
sensor that can be
worked with console display
Image Maximum
Number
temperature and
8
8
1
4
1
CO2
air
temperature/humidty
1
be displayed on the main
screen, it will show its data on the
8
Image Maximum
Number
thermometer
for
water
channels
8
console display.
power up, the display console
will receives
he display console will re
-
to search the data.
Please refer to
worked with console display

Overview
WiFi/Lan Gateway
Figure 1: Wi-Fi Gateway
Re . LED Description
1 ensor Link
(blue)
On
:
flash when one packet of wireless sensor data
was received
O : No wireless sensor data is received. Please
check whether the wireless sensor is working
normally, and make sure that the sensor can
connect to the device hotspot "GW2000-
WIFIXXXX" with a mobile phone/PC, open the
browser, and log in to the webpage 192.168. 4.1
(the initial password is empty), enter the ensors
ID interface to re-register the corresponding
wireless ensor .
2 erver (red)
On
(steady): network communication normal and
data uploaded to configured weather service(s)
successfully.
Flash (faster): Wi-Fi configuration mode is active.
Use the W View Plus app to complete the con-
figuration.
Flash (slow): network communication normal, but
upload to one or more configured weather services
failed. First confirm Internet access through your
router is functioning, and then check whether the
upload server account and password are correct (use
W View application).
O : Wi-Fi connection failed
Table 2: LED Indicators
Wi-Fi Con iguration
5.1 Be ore Setup
Connect the Gateway console power jack to AC power with the power adapter (included).
When powered up the Gateway, the ever LED will flashes quickly. It means that the gateway is in
the Wi-Fi configuration mode. If it does not flash quickly, press and hold the top RE ET button for 5
to enter the Wi-Fi configuration state
The Gateway console can connect to your network via Wi-Fi or directly connected to your router
using the included Ethernet cable.

Place the powered sensors array about
several minutes for the remote sensors to synchronize with the receiver.
5.2 Setup Method
5.2.1 Method A:
Setup via app
Install W View
Plus app. Then follow up the instruction as the App will walk you through the
ETUP Process
Remark: We recommend method A to be used in the first place. Please follow the App
complete account registration and device provision. If method A
method B to start
ECOWITT Dashboard vs
WU Dashboard vs Live Data
Here is a short explanation showing data difference:
Live Data
is obtained by the mobile app by conn
when your mobile device and gateway are connected to the same Wi
after you select “Device List” from the main settings menu. If your mobile device is in another
network,
no device(s) will show up in this list and you will not be able to select a device for displaying
the “Live Data” screen.
ECOWITT Dashboard
shows the data obtained from
mobile device can reach the Internet and theref
home Wi-
Fi network, such as when using cellular data.
Place the powered sensors array about
2 to 3 meter from the Gateway console
receiver and wait
several minutes for the remote sensors to synchronize with the receiver.
Setup via app
Plus app. Then follow up the instruction as the App will walk you through the
Remark: We recommend method A to be used in the first place. Please follow the App
complete account registration and device provision. If method A
is not working for you, please follow
WU Dashboard vs Live Data
Here is a short explanation showing data difference:
is obtained by the mobile app by conn
ecting directly to the gateway. This can only happen
when your mobile device and gateway are connected to the same Wi
-
Fi network. It will then show up
after you select “Device List” from the main settings menu. If your mobile device is in another
no device(s) will show up in this list and you will not be able to select a device for displaying
shows the data obtained from
ECOWITT
server. This requires that your
mobile device can reach the Internet and theref
ore this is possible even when you are not on your
Fi network, such as when using cellular data.
receiver and wait
Plus app. Then follow up the instruction as the App will walk you through the
Remark: We recommend method A to be used in the first place. Please follow the App
’s instruction to
is not working for you, please follow
ecting directly to the gateway. This can only happen
Fi network. It will then show up
after you select “Device List” from the main settings menu. If your mobile device is in another
no device(s) will show up in this list and you will not be able to select a device for displaying
server. This requires that your
ore this is possible even when you are not on your

WU Dashboard
shows the data obtained from WU server. This requires that your mobile device can
reach the Internet and therefore this is possible even w
such as when using cellular data.
5.2.2 Method B: Setup
via Embedded Webpage
1. Find the Gateway
GW2000X
with a browser)
as Figure 7
Or
Plug in Ethernet
cable to connect this
DHCP
2. O
pen a browser, navigate to the following IP address 192.168.4.1
Figure 7
3.
Enter Login web page as Figure 10.
There is no need to enter the password when you are login for the first time.
enter webpage interface.
Figure 10 Login screen
4. Local Network
Upload data to the weather services, start from here, complete below
shows the data obtained from WU server. This requires that your mobile device can
reach the Internet and therefore this is possible even w
hen you are not on your home Wi
such as when using cellular data.
via Embedded Webpage
GW2000X
-WIFIXXXX from your device (computer,
smart
as Figure 7
cable to connect this
gateway to WiFi router, find its’
assigned IP address via
pen a browser, navigate to the following IP address 192.168.4.1
as Figure 8
Figure 8
Enter Login web page as Figure 10.
There is no need to enter the password when you are login for the first time.
Press Login button to
Figure 10 Login screen
Upload data to the weather services, start from here, complete below
I to III
steps.
shows the data obtained from WU server. This requires that your mobile device can
hen you are not on your home Wi
-Fi network,
smart
phone, or tablet
assigned IP address via
as Figure 8
Press Login button to
steps.

After Apply, check
whether the IP
address is retrieved
Mark this MAC, which you
will use to add device on the
Ecowitt Weather service
et the reporting interval
time (default: 1 minute).
I
II
III
5.Weather ervices
Finished Registration in the weather server you want to upload the data and get the tation ID and
Password in the weather erver. Enter it in the below “Weather erver” screen.
Figure 13 Weather Server screen
The supported services are shown in the table below:
Hosting Website Description

Service
Ecowitt
Weather
https://www.ecowitt.net Ecowitt is a new weather server
that can host a bunch of sensors
that other services don’t support.
Weather
Undergound
https://www.wundergrou
nd.com
Weather Underground is a free
weather hosting service that allows
you to send and view your weather
station data real-time, view graphs
and gauges, import text data for
more detailed analysis and use
iPhone, iPad and Android
applications available at
Wunderground.com. Weather
Underground is a subsidiary of The
Weather Channel and IBM.
Weather
Cloud
https://weathercloud.net Weathercloud is a real-time
weather social network formed by
observers from around the world.
Weather
Observation
Website
(WOW)
http://wow.metoffice.gov
.uk/
WOW is a UK based weather
observation website. WOW allows
anyone to submit their own
weather data, anywhere in the
world.
Customized
Website
upports uploading to your
customized website, if the website
has the same protocol with
Wunderground or Ecowitt
Table 4: Supported Weather Servers
5.3 Registering Ecowitt Weather Server
It’s recommended to use the Ecowitt Weather server to monitor and record your sensors’ data.
To register with Ecowitt follow these steps:
1) On the Weather erver page, set the reporting interval time (default: 1 minute).
2) Visit the website: https://www.ecowitt.net on your computer and finish the registration on the
page.
 Press the upper left menu button and select Devices.
 Press Add Device and input all the information needed (The MAC address can be found on the
Weather erver page).
 Press ave.
 Press Dashboard on the menu. Your sensor data would be available on the dashboard within
several minutes.

Note: When select device address on map, please wait till the map display before select your address.
Note: Please put in the correc
t time zone to get the correct time. Because the time will be updated to
internet time automatically while WIFI connection.
You may add a shortcut to the ecowitt.net website on the home page of your phone so that you can
visit it just like opening an app.
5.3.1
Viewing data on ecowitt.net
You can observe your sensor
’s data by using the
one, where your station ID replaces the text “ TATIONID”.
https://www.ecowitt.net/home/index?id=
Note: If you w
ant to share your station data with other users, you’ll need to set your data to be public.
Other users need to log in the ecowitt.net first to view your data.
It will show a page such as this, where you can look at today’s data and historical data as well
Dashboard
Note: When select device address on map, please wait till the map display before select your address.
t time zone to get the correct time. Because the time will be updated to
internet time automatically while WIFI connection.
You may add a shortcut to the ecowitt.net website on the home page of your phone so that you can
Viewing data on ecowitt.net
’s data by using the
ecowitt.net
web site. You will use a URL like this
one, where your station ID replaces the text “ TATIONID”.
https://www.ecowitt.net/home/index?id=
TATIONID
ant to share your station data with other users, you’ll need to set your data to be public.
Other users need to log in the ecowitt.net first to view your data.
It will show a page such as this, where you can look at today’s data and historical data as well
Note: When select device address on map, please wait till the map display before select your address.
t time zone to get the correct time. Because the time will be updated to
You may add a shortcut to the ecowitt.net website on the home page of your phone so that you can
web site. You will use a URL like this
ant to share your station data with other users, you’ll need to set your data to be public.
It will show a page such as this, where you can look at today’s data and historical data as well
.

Graph display
List display
Weather Map

Email Alerts
Ecowitt.net is a responsive design and mobile friendly. imply open your mobile devices web
browser, browse to ecowitt.net, and bookmark your dashboard for quick access
5.4 Registering
Weather Undergound
Perform the following steps to
get the tation ID and Password
1.
Visit Wunderground.com and select the
2. Click My Pro ile
and select My Devices
Ecowitt.net is a responsive design and mobile friendly. imply open your mobile devices web
browser, browse to ecowitt.net, and bookmark your dashboard for quick access
.
Weather Undergound
get the tation ID and Password
on
wunderground.com:
Visit Wunderground.com and select the
Join
link at the top of the page and sign up.
and select My Devices
to register your station
Ecowitt.net is a responsive design and mobile friendly. imply open your mobile devices web
wunderground.com:
link at the top of the page and sign up.