FTS 96220 User manual

FTS Complete All 5G Antenne
Article No.: FTS 96220
Manufacturer: FTS Hennig
EAN: 4260265970029
Description:
The FTS Complete All 5G Antenna is a high directional MIMO antenna which supports 3G,
4G, 5G and WLAN. It is a high performance antenna, which can be used for many 5G
networks. The newly produced antenna has a diversity support and can also be used for
WLAN with 2,4 GHz and 5 GHz, Iot and LoraWAN. The rugged material of the antenna and
the wide frequency range make the antenna to a sustainable product for the next 10 years.
Electrical Data:
Frequency Range
650 MHz to 7000 MHz
Peak Gain
2x 12 dBi
VSWR
< 1,7
Beam width
60°
Vertical Beam width
-
Nominal Impedance
50 Ohm
Polarisation
Cross-polarized (1x vertical, 1x horizontal)
DC –short-circuit
Nein
Material
case ABS light grey RAL 7035 / dark grey
RAL, Aluminium
Ingress protection
IP 65 DIN EN 60529
Mounting bracket material
Stainless steel
Pole diameter
30-55 mm
Termination
2x N female
Size
18,6 x 35,2 x 14,7 cm (without mounting
material)
Weight without mounting bracket material
1,2 kg

Installation of the 5G antenna:
1. Please fix the mast mount as it is shown in the picture below. The antenna mast with
30 to 55 mm needs to be sidewards to the clip and bracket.
2. The connectors should be covered with self-vulcanising tape. It is important, that the
connectors are completely covered with the tape.
3. The M8 nuts should be tighten with a wrench 13.
Receive direction
Tilt & grade
The peak of the antenna shows towards the
mast.
If the closer field of the antenna should be
reached, we recommend the inclined
installation of the antenna
Antenna modules
Horizontal & vertical
If you want to use 2-3 modules, please
install the modules similar to the picture
The modules are mounted alternatly
horizontally & vertically.

Measurement report of the FTS Complete All 5G Antenna
Radiation diagram of the 5G antenna
Declaration of conformity
FTS Hennig declares, that the FTS Complete All 5G Antenna is produced in conformity with
the basic requirements und the relevant policy specifications of 2014/53/EU, 2009/125/EG
and 2011/65/EU