FujiFilm Instax Square SQ 6 User manual

JP
EN
CPL11B704-101
使用説明書/困ったときには/安全にご使用いただくために
User’s Guide/Trouble shooting/Safety precautions

25
EN
Contents
Part Names............................................................................................................................................................26
Attaching the Strap ...........................................................................................................................................28
Inserting Batteries..............................................................................................................................................29
Loading the instax SQUARE Film Pack........................................................................................................30
Turning the Camera on/off .............................................................................................................................32
Taking Pictures ....................................................................................................................................................32
Unloading a Used instax SQUARE Film Pack.............................................................................................................. 33
Taking Pictures with Various Shooting Modes ........................................................................................34
Selecting a Shooting Mode.............................................................................................................................................. 34
Taking Pictures without Using the Flash (Flash Suppressing)............................................................................. 34
Shooting Mode..................................................................................................................................................................... 35
Using the Self Timer...........................................................................................................................................37
Using the Flash Filter.........................................................................................................................................37
SPECIFICATIONS..................................................................................................................................................38
TROUBLE SHOOTING.........................................................................................................................................39
IMPORTANT SAFETY NOTICE..........................................................................................................................42
ENGLISH
• Read“IMPORTANTSAFETYNOTICE”(Page42)
forsafetyuse.
• AfterreadingthisUser’sGuide,keepitinasafe,
easytofindplacewhereyoucanrefertoitif
needed.

26
EN
Part Names
Front
1Power switch
2Film ejection slot
3Self timer lamp
4Viewfinder
5Strap hook
6Shutter button
7AE light sensor window
8Flash sensor window
9Tripod socket (Tripod sold separately)
10 Lens/Lens cover
11 Self-portrait mirror
12 Flash lampface
1
910
2
12
4
7
8
3
5
6
11

27
EN
Part Names (Continued)
Rear
13 Mode indicator/LED
14 Strap hook
15 MODE (mode) button
16 Self timer button
17 Flash suppressing button
18 Back cover lock
19 Back cover
20 Film counter
21 Battery lid
22 Film pack confirmation window
23 Eyepiece
18
23
19
14
15
16
17
22
13
20
21

28
EN
Attaching the Strap
Attach the provided camera strap to the strap hook on each side as in the illustrations below.
Caution
• For safety, use the strap only as a shoulder strap. Do not put the strap around your neck.
• Be careful so that the strap does not obstruct the film ejection slot.
~
Ÿ

29
EN
Inserting Batteries
Open the battery lid.
Caution
• Use two new CR2 lithium batteries. (All the batteries should be new and be the same brand/type.)
• Insert the batteries before you load the instax SQUARE film pack.
• The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature
before using this camera.
Insert the batteries.
• Insert one CR2 lithium
battery straight (1)
matching the Cand
Dpolarities and slide it
to the end (2).
Then, insert the other
battery.
!~
Ÿ
Align the tabs on the
battery cover and push
the battery cover lock
until it clicks into place.
To remove the batteries, remove one battery first, and
then slide the other battery and take it out.

30
EN
Loading the instax SQUARE Film Pack
Caution
Do not open the back cover until you have used up the film; otherwise, the rest of the film will
become exposed and turn white. The film can no longer be used.
• When you load the film pack, never press the two rectangular holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may damage the camera.
Use FUJIFILM Instant Film “instax SQUARE” only. The instax mini film or instax WIDE film cannot be used.
Notes on the film pack
• Each FUJIFILM Instant Film“instax SQUARE” pack contains 1 black film protective cover and 10 film sheets.
• Do not remove the film pack from its inner bag before loading it into the camera.
For details, refer to the instructions and warnings on FUJIFILM Instant Film“instax SQUARE”.
Press the back cover lock down to open the back
cover.
Hold both sides of the film pack, align the yellow
marks on the camera and the film pack, then
insert it straight.
~Ÿ

31
EN
Loading the instax SQUARE Film Pack (Continued)
Slide the power switch toward the “ON” side to
turn the camera on.
• Do not hold the lens cover when you are turning
the camera on; otherwise, the lens cover will
not open.
Press the shutter button.
The film cover (black) is ejected and“10
” is displayed
on the film counter on the back of the camera.
Carefully remove the film cover.
Close the back cover. Make sure the back
cover lock clicks into place.
@
!
⁄

32
EN
Turning the Camera on/off
Slide the power switch toward the “ON” side to turn the
camera on.
The lens will extend and the LED on “ ” will light up.
• Do not hold the lens cover when you are turning the
camera on; otherwise, the lens cover will not open.
Slide the power switch toward the “OFF” side to turn the
camera off.
The lens will retract and the LED on the mode indicator
will go off.
Auto power off
When no operation occurs for 5 minutes, LEDs on the back
will go off and the camera will turn off automatically.
Press one of the buttons on the back to turn the camera
on again.
~
Ÿ
!
Taking Pictures
Press the shutter button.
• The shutter will not release while the flash is
charging. (The LED on the flash suppressing
button will be flashing while the flash is charging.)
• Hold the camera with the flash lampface at the
top.
• Be careful so that your fingers or the strap do not
cover the flash lampface, flash sensor window, AE
light sensor window, lens, or film ejection slot.
• Look into the viewfinder so that the“O” mark
appears in the center.
• Be careful not to touch the lens surface when you
press the shutter button.
Slide the power switch toward the “ON” side to turn
the camera on.
Hold the camera and confirm the desired
composition of the final image.

33
EN
Taking Pictures (Continued)
⁄Every time you take a photo, the number on the film counter decreases
from “10” to reflect the number of remaining photos, and“0” is displayed
when you have used up the film pack.
When the film has been ejected (the camera stops making a sound), grasp
the edge of the film, then take it out.
• The developing time is approximately 90 seconds. (The time varies
depending on the ambient temperature.)
When finished using the camera, always switch the camera to “ off ” to
maintain battery life. If the camera is left switched
“ on ” for 5 minutes
without being used, it will automatically switch to
“ off ” .
When
“ 0 ” is displayed on the film counter, unload the film pack following the procedure below.
UnloadingaUsedinstaxSQUAREFilmPack
~ Ÿ
Press the back cover lock down to open
the back cover.
Grasp the rectangular holes on the film pack,
then pull it out straight.