Fujimarca MC710 User manual

Instruction Manual
FUJIMARCA BLOCK SHAVER –MC710 –STAINLESS STEEL

2
Table of Contents:
Page
Safety ------------------------------------------------------------------------------------------------------------------3
Warnings --------------------------------------------------------------------------------------------------------------3
Model and Specs ----------------------------------------------------------------------------------------------------4
Characteristics -------------------------------------------------------------------------------------------------------4
Diagram ---------------------------------------------------------------------------------------------------------------5
Operating Instructions ---------------------------------------------------------------------------------------------6
Cleaning ---------------------------------------------------------------------------------------------------------------6
Caution ----------------------------------------------------------------------------------------------------------------6
Ice -----------------------------------------------------------------------------------------------------------------------6
Warranty --------------------------------------------------------------------------------------------------------------6

3
Safety
Before operating the machine, please read the following Instructions for Safety in the manual
very carefully and operate the machine correctly.
Safety Warnings
Do not operate the machine in the rain.
This machine is for commercial use. Be sure to keep the machine away from children.
Do not pour water over the machine or immerse machine in water.
Do not damage power supply cord.
Always keep plug clean and plug into outlet correctly.
Do not touch any electrical parts with wet hands.
Never touch the spike assembly/spikes while the machine is operating.
Do not put your hands inside the ice guard when machine is operating.
Be careful of the blade when cleaning the ice plate.
Do not use this machine for purposes other than shave ice.
Always operate the machine on a solid flat surface.
Never attempt to disassemble the machine by yourself.

4
To our valued customer,
Thank you for purchasing the Fujimarca Electric Block Ice Shaver. We assure you your
experience with this machine will be exceptional. Before using the machine, please read the
instruction manual carefully.
Model and Specs:
Model
MC710
HP
¼ HP
Electrical Current
110V/60Hz
Machine Size L X W X H (Weight)
17”X 10”X 31”(70 LBs)
Packing Size L X W X H (Weight)
23” X 17” x 36.5” (75 LBs)
Characteristic:
1. Made from high quality stainless steel for easy cleaning.
2. Shaving output area is 9.25”. The higher clearance allows user to have more room to
pack and shape the ice.
3. Designed to present. The motor and gears are completely enclosed.
4. Shares many similar parts with Fujimarca MC709SE and produces the same fine texture.
5. Durable brass plate and patented feature for easy cleaning.
6. Motor is CE certified.
7. Japan imported steel and manufactured in Taiwan.

5
(1) Gear and Pressure Assembly
(2) Main Shaft
(3) Ice Plate
(4) Power Switch
(5) Blade Adjustment Knob
(1)
(2)
(3)
(4)
(5)
Diagram

6
Operating Instructions:
1
Raise the main shaft by turning the handles on the gear assembly counter-
clockwise.
2
Place block ice onto the center of the shaving plate and lower the shaft by
turning the handles on the gear assembly clockwise.
3
Make sure ice is lock in place with spikes.
4
Turn on the power switch.
5
Using blade adjustment knob to adjust to texture preference. The higher the
blade setting then the thicker and faster the machine will shave. The lower
the blade setting then the thinner and slower the machine will shave.
Note: The lower the blade then the finer the ice texture.
Cleaning
Wipe machine down at the end of the day with a dry cloth to remove any excess water on the
machine. Apply grease only if necessary.
Caution
Be careful of the blade when loading and unloading ice into the machine. Always try to leave
blade in the lowest position to prevent injuries and accidents.
Ice
The recommended size to us is 6”. You can use a 6” cube block or a round block that is 6” high with 6”
circumference. Be sure to use only solid block ice for your machine. Solid block ice is ice that have been
frozen for a minimum of 15 hours. Allow ice to thaw after removing from freezer before shaving. Do not
use compressed block ice. Compressed block ice tends to trap air and will not shave evenly. They can
also shatter while shaving.
Warranty
Machine comes with 1-year mechanical warranty from HTK Hawaii Inc.