Fujin FUJ 2.6 P User manual

OLIRU Trading Pty Ltd
Web: www.oliru .com.au
Model：FUJ 2.6 P
User Manual of Air conditioner
Fujin
Air Conditioning

◆Warning
●All warranty repairs must be completed by a service agent or once out of
warranty, a Professional with the relevant trade qualification in case of power
line being damaged;
●The product should be installed and used according to the Wiring Regulations
of the country (240V~, 50Hz);
●The minimum distance between the product and the wall shall be 60cm when it
is used. The air outlet/inlet of the product should not be covered when running.
●Internal electric current fuse of the product is 240V/2A.
●Correctly insert the power plug before usage.
●When in use, the product shall be fitted with reliable earth grounding;
● Users shall not start or stop the product operation directly by inserting or

pulling out power cord.
●Don’t use damaged power extension leads.
●Ensure the length of power lead shall not be too long.
●Grasp the power plug and remove from the device instead of pulling on cord.
●Turn off the power when cleaning the filter screen or accessories;
●Don’t insert fingers, wet hand or other objects into the internal part of the
product during its operation;
●Turn off the power and pull out the plug immediately if there is a smell of
burning;
●The product must be maintained by the manufacturer’s service agent or a
professional with the relevant qualifications. Apart from t air filter, he User
shall not maintain the product internally.
●Don‘t use the product with corrosive or explosive gases around.
●Keep the product away from the TV or radio by at least 1 meter in order to
prevent electromagnetic interference;
●Don’t place the product in direct sunlight for fear the surface will discolour.
●During transportation, the incline of the product shall not exceed 30°.
●During usage, the product must be placed on a level surface.
●Please make sure you have emptied the condensate water before moving the
product.
●Remove the batteries from remote control if not using the product for extended
times.
◆Contents

◆Introduction……………………………… ……..… 1
◆Parts Description...………………………… …..……2
◆Accessories…..…………….………………… ..……3
◆Button Features Description & Operating Guides …4-6
◆Installation & Usage Instructions……… …..…7-12
◆Maintenance………… ……………………… …13
◆Service and maintenance………… …………… 14
◆Attention and Warranty 15-16

◆Introduction on technology and usage environment
The product is a newly designed air-conditioner which is dedicated to
adjusting the temperature in various confined spaces. The product has a
cooling and heating function. The energy efficiency is improved by a heat-
dissipating method of water cycle at high temperature within the unit that
allows condensate water over the coil. This will ensure an efficient cooling
capacity in high temperature environments to a maximum of 40 degrees C.
whilst the air conditioner can be used as a spot cooler, it is more efficient
if the unit is placed inside and the hot air ducted outside. This will allow
the cool air to be cycled internally. This air conditioner is not only
applicable for use inside camper trailers, caravans and tents, but also in
offices, outdoor temporary command centers, open-type workshops, field
work temporary rest rooms, transport vehicles without air conditioner,

machine room with high precision requirements, machine room for
instrument of equipment, boating and commercial kitchens etc.
◆Specifications & technical parameters:
Model
FUJ-2.6 P
Function
Cold-Heat
Heating output(W）
2600
Heating capacity (W）
2700
Rated voltage (V/Hz)
220-240v~50Hz
Refrigerating Rated Power
（W）/(A)
980/4.2
Rating power of heat
（W）/(A)
1020 /4.4
Wind rate (m3/hr)
320
Applicable environment
（℃）
5~40
Applicable space（M2）
10-18
Net weight（Kg）
27
Dimension of product
（mm）
（Length*Width*Height）
520*340*420
1
◆Parts of the air-conditioner
⑧
⑥
③

②
①
⑦ Temperature Sensor
①Power cord
④ Rear air outlet
⑧ Filter
⑤ Filter block
②Universal wheel
⑥ Control panel
③ Front air outlet
④
⑤

Front Side Rear
2
◆Accessory
Assembly unit
Name
Quantity
Note
Forward air outlet
round fitting
1
Flexible hose for
forward air outlet
fitting (small)
1
Flexible hose for rear
air outlet fitting (big)
1
Remote control
1
Bracket A for water tank
1
Optional
part
Bracket B for water tank
1
Optional
part
Water tank
1
Optional
part
⑦

Air outlet Connector
1
Optional
part
K Exhaust duct Connector
1
Optional
part
3
◆Button features Introduction & Operating Guides
1. ON/OFF
●Press the button once to turn on the air conditioner, press it again to turn it off.
●When the power is connected, the power indicating light is red.
2. Fan speed adjusting button
Indicator light
Display
Control buttons

●Press this button to choose high/low air speed. It will switch between high
speed and low speed by each press.
●Choose operation under high speed, the fan speed indicating light is green. And
will display on the remote control.
●Choose the operation under low fan speed and the fan speed indicating light
will be yellow. Dis appears on the remote control.
Note: Heating mode only has low fan speed operation.
3. Mode selection button
●Press this button, the mode will change to automatic mode, cooling mode and
heating mode.
●After choosing the automatic mode, the automatic indicating light will be green.
When the ambient temperature is ≧24℃, it will choose cooling mode
automatically, and will display on the remote control. When the ambient
temperature is ＜18℃, it will choose heating mode automatically,
And will display on the remote control.
●Choose cooling mode, when set temperature is ＜ambient temperature, (the
minimum set temperature is 18℃) the cooling indicating light is green.
Will display on the remote control.
●Selecting the heating mode, the symbol will appear. Set the temperature to
the required setting and the air conditioner will cycle at that temperature.
4
◆Button features Introduction & Operating Guides
4.Temperature adjusting button
●Press this button, the temperature will rise 1℃with each press (the value of