Fujitsu Siemens Computers SCENIC Edition X100 User manual

Professional PC
Operating Manual
English
SCENIC Edition X100 / X102
ESPRIMO Edition P

Are there ...
... any technical problems or other questions which you would like to be clarified?
Please contact:
●our Hotline/Help Desk
(see the included Help Desk list or go to: http://www.fujitsu-siemens.com/support/helpdesk.html)
●your sales partner
●your sales outlet
Further information can be found in the "Safety" and "Warranty" manuals.
The latest information on our products, tips, updates, etc., can be found on the internet under:
http://www.fujitsu-siemens.com

This manual was produced by Xerox Global Services.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Printed in the Federal Republic of Germany
AG 03/06
Ausgabe/Edition 1
Bestell-Nr./Order No.:
A26361-K678-Z121-1-7619

Introduction
Important notes
Preparing for use
Operation
Troubleshooting and tips
System expansions
Technical data
Index
SCENIC Edition X100 / X102
ESPRIMO Edition P
Operating manual
March 2006 edition

SCENIC and ESPRIMO are registered trademarks of Fujitsu Siemens Computers GmbH.
Microsoft, MS, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft
Corporation.
VESA and DPMS are trademarks of Video Electronics Standards Association.
PS/2 is a registered trademark of International Business Machines, Inc.
Pentium is a registered trademark of Intel Corporation, USA.
Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
Acrobat Reader is a trademark of Adobe Systems Incorporated.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
Copyright © Fujitsu Siemens Computers GmbH 2006
All rights, including rights of translation, reproduction by printing, copying or similar methods,
in part or in whole, are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.

Contents
Your SCENIC Edition X100 / SCENIC Edition X102 / ESPRIMO Edition P..................................... 1
Notational conventions ......................................................................................................................... 2
Important notes .................................................................................................................................. 3
Safety notes.......................................................................................................................................... 3
Energy saving, disposal and recycling ......................................................................................... 3
CE marking................................................................................................................................... 3
FCC Class B Compliance Statement ................................................................................................... 4
Transporting the PC ............................................................................................................................. 5
Cleaning the PC ................................................................................................................................... 5
Preparing for use................................................................................................................................ 7
Unpacking and checking the delivery................................................................................................... 7
Steps for initial setup ............................................................................................................................ 7
Setting up the PC ................................................................................................................................. 8
Connect the monitor, mouse and keyboard.......................................................................................... 8
Connecting the monitor ................................................................................................................ 9
Connecting the mouse ................................................................................................................. 9
Connecting a keyboard............................................................................................................... 10
Connecting the PC to the mains voltage ............................................................................................ 11
Initial switch-on: Software will be installed.......................................................................................... 12
Switching on monitor and PC .....................................................................................................13
Installing the software................................................................................................................. 14
Connecting external devices .............................................................................................................. 15
Ports ........................................................................................................................................... 16
Connecting external devices to the serial port ........................................................................... 17
Connecting external devices to the parallel port ........................................................................ 17
Connecting external devices to the USB ports........................................................................... 18
Operation........................................................................................................................................... 19
Switching on the PC ........................................................................................................................... 19
Switching off the PC ........................................................................................................................... 19
Indicators on the PC ........................................................................................................................... 20
Keyboard ............................................................................................................................................ 21
Important keys and key combinations ........................................................................................ 22
Working with floppy disks ................................................................................................................... 23
Settings in BIOS Setup....................................................................................................................... 24
Property and data protection .............................................................................................................. 24
Anti-theft protection .................................................................................................................... 24
BIOS setup security functions .................................................................................................... 25
Access authorisation via SmartCard .......................................................................................... 25
Access protection with SystemLock ........................................................................................... 25
Troubleshooting and tips................................................................................................................. 27
Installing new software ....................................................................................................................... 27
Power-on indicator remains unlit after you have switched on your device ......................................... 27
The screen stays blank....................................................................................................................... 28
No mouse pointer displayed on the screen ........................................................................................29
The floppy disk cannot be read or written........................................................................................... 29
Time and/or date is not correct........................................................................................................... 30
Error messages on the screen ........................................................................................................... 30
Restoring the hard disk contents ........................................................................................................ 30
Tips .................................................................................................................................................... 30
A26361-K678-Z121-1-7619, edition 1

Contents
System expansions...........................................................................................................................31
Information about boards ....................................................................................................................31
Opening the casing .............................................................................................................................32
Closing the casing...............................................................................................................................32
Installing and removing a board..........................................................................................................33
Installing a board.........................................................................................................................33
Removing a board.......................................................................................................................35
Low-Profile boards ..............................................................................................................................37
Mounting slot adapter .................................................................................................................37
Removing slot adapter ................................................................................................................37
Installing and removing drives ............................................................................................................38
Installing an accessible drive ......................................................................................................38
Removing an accessible drive ....................................................................................................40
Replacing the floppy disk drive ...................................................................................................41
Installing/removing hard disk drive with EasyChange rails.........................................................42
Installing/removing hard disk drive with screws ..........................................................................44
Installing/removing hard disk drive and drive cage with screws .................................................46
Extensions to the mainboard...............................................................................................................48
Removing the power supply........................................................................................................48
Upgrading main memory.............................................................................................................49
Replacing the processor .............................................................................................................49
Replacing lithium battery.............................................................................................................50
Installing the power supply..........................................................................................................51
Technical data...................................................................................................................................53
Index...................................................................................................................................................55
A26361-K678-Z121-1-7619, edition 1

Your SCENIC Edition X100 /
SCENIC Edition X102 / ESPRIMO
Edition P...
... is available with various configuration levels with different hardware and software. Please observe
the notes on your operating system.
You can incorporate operable drives (for example DVD drive) as well as other boards.
Depending on the configuration selected, the operating system is preinstalled on your hard disk (e.g.
Windows XP).
Your PC has a number of security features to ensure that no unauthorised persons can access your
data, for example, you can activate a screen saver with password protection. In addition, you can
also mechanically lock your PC. The security functions in the BIOS Setup also allow you to protect
your data by means of passwords.
DeskUpdate allows you under some operating systems to easily and quickly install the latest drivers
and operating system extensions with a few mouse clicks. DeskUpdate is contained on the
"Drivers & Utilities" CD.
Further information on this PC is provided:
●in the "Getting Started" manual
●in the "Safety" manual
●in the "Ergonomics" manual
●in the "Warranty" manual
●in the operating manual for the monitor
●in the technical manual for the mainboard
●in the "BIOS Setup" manual
●in your operating system documentation
●in the information files (e.g. *.TXT,T*.DOC, *.CHM, *.HLP, *.PDF, *.HTML)
i
You will find an electronic version of some of the listed manuals on the "User
Documentation" or "Drivers & Utilities" CD.
You can access and view the required information using the Acrobat Reader program,
which is also on the CD. If necessary, you can also make a print version of the manual.
A26361-K678-Z121-1-7619, edition 1 1

Your SCENIC Edition X100 / SCENIC Edition X102 / ESPRIMO Edition P...
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
indicates information which is important for your health or for preventing physical damage.
i
indicates important information which is required to use the system properly.
►Text which follows this symbol describes activities that must be performed in the order shown.
Text in this typeface indicates screen outputs.
This font indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
2 A26361-K678-Z121-1-7619, edition 1

Important notes
In this chapter you will find information regarding safety which is essential to take note of when
working with your PC.
Safety notes
Pay attention to the information provided in the "Safety" manual and in the following
security notes.
!During installation and before operating the device, please observe the instructions on
environmental conditions in the "Technical data" chapter as well as the instructions in the
"Preparing for use" chapter.
You may only operate the device, if the rated voltage for the device is set to the local
mains voltage. Check the rated voltage set for this device (see the "Preparing for use"
chapter).
The main switch and the ON/OFF switch do not disconnect the PC from the mains voltage.
To completely disconnect the mains voltage, remove the power plug from the grounded
mains outlet.
Replace the lithium battery on the mainboard in accordance with the instructions in the
"Extensions to the mainboard" - "Replacing lithium battery" section.
Caution, components in the system can get very hot.
Energy saving, disposal and recycling
Further information can be found on the "User Documentation" or "Drivers & Utilities" CD provided
with your computer.
CE marking
CE marking for devices without wireless LAN
The shipped version of this device complies with the requirements of the EEC
directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low
voltage directive".
A26361-K678-Z121-1-7619, edition 1 3

Important notes
FCC Class B Compliance Statement
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital device,
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-
Causing Equipment Standard ICES-003 for digital apparatus. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in strict
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between equipment and the receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused
by unauthorised modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The
correction of interferences caused by such unauthorised modification, substitution or attachment will
be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
4 A26361-K678-Z121-1-7619, edition 1

Important notes
Transporting the PC
!
Transport all parts separately in their original packaging or in a packaging which protects
them from knocks and jolts, to the new site. Do not unpack them until all transportation
manoeuvres are completed.
Never drop the monitor (risk of implosion)!
Cleaning the PC
Turn off all power and equipment switches and remove the power plug from the mains
supply.
!Do not clean any interior parts yourself. Leave this job to a certified service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the system.
Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild
domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and
the mouse.
A26361-K678-Z121-1-7619, edition 1 5

Important notes
6 A26361-K678-Z121-1-7619, edition 1

Preparing for use
!
Please take note of the safety information in the "Important notes" chapter.
Unpacking and checking the delivery
It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
►Unpack all the individual parts.
►Check the delivery for damage incurred during transportation.
►Check whether the delivery agrees with the details in the delivery note.
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.
Steps for initial setup
Only a few steps are necessary to put your new PC into operation for the first time:
– Select location for PC and set up PC
– Connect the monitor, mouse and keyboard
– Check the voltage at the mains outlet and connect the PC to an electrical outlet
– Switching on the PC
You will learn more about the individual steps in the following sections.
i
External devices
If you have received other devices in addition to your PC (e.g. a printer or a modem), do
not connect these until after the initial installation. The following sections contain a
description of how to connect these external devices: "Connecting external devices to the
serial port" and "Connecting external devices to the parallel port".
Drives and boards
If you have received drives or boards with your PC, please do not install them until after
first-time setup. How to install drives and boards is described in the "System expansions"
chapter.
A26361-K678-Z121-1-7619, edition 1 7

Preparing for use
Setting up the PC
!
When installing your PC, give consideration to the recommendations and safety notes in
the "Safety" manual.
Set up the PC only in its correct orientation. The points to observe are illustrated on the
following pages.
We recommend that you place your device on a surface with good anti-slip qualities. In
view of the multitude of different finishes and varnishes used on furniture, it is possible that
the rubber feet will mark the surface they stand on.
Do not expose the PC to extreme environmental conditions (see "Technical data"
chapter). Protect the PC from dust, humidity and heat.
When installing the PC, provide sufficient clearance around the PC, as indicated in the
"Technical data" chapter to ensure adequate ventilation. In order to avoid overheating, do
not cover the ventilation area of the monitor or the PC.
Do not place several PCs one above the other.
Depending on the location of your device, bothersome vibrations and noises may occur.
To prevent this, a distance of at least 3 mm should be maintained from other devices on
casing sides without ventilation surfaces. In addition, we recommend placing the device on
support feet, as these buffer vibrations.
Connect the monitor, mouse and keyboard
The ports for the monitor, mouse, and keyboard are on the rear and front of the PC.
PS/2 keyboard port / purple PS/2 mouse port / green
USB port / black
Monitor port / blue
8 A26361-K678-Z121-1-7619, edition 1

Preparing for use
Connecting the monitor
►Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►Plug the data cable into the monitor port of the PC.
2
1
2
►Depending on your device configuration level, plug the monitor power cable into either the
PC (1) or the grounded mains outlet (2).
!
The monitor power cable may only be connected to the PC monitor socket if the monitor
current consumption is smaller than 1,5 A with 230 V or 3 A with 115 V. The values for the
monitor current consumption can be found in the technical data on the monitor or in the
operating manual for the monitor.
Connecting the mouse
Depending on the equipment level selected, your PC will be supplied with a PS/2 mouse or a USB
mouse.
Connecting a PS/2 mouse
►Connect the PS/2 mouse to the PS/2 mouse port of the PC.
Connecting USB mouse
►Connect the USB mouse to the USB port of the PC.
i
If you do not attach a mouse at the PS/2 mouse port , you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
A26361-K678-Z121-1-7619, edition 1 9

Preparing for use
Connecting a keyboard
Depending on the equipment level selected, your PC will be supplied with a standard keyboard or a
USB keyboard.
Connecting standard keyboard
Use the supplied keyboard cable only.
►Plug the other end of the keyboard cable (square plug) into the socket on the underside of the
keyboard.
►Plug the round plug of the keyboard cable into the keyboard port of the PC.
Connecting USB keyboard
Use the supplied keyboard cable only.
►Plug the other end of the keyboard cable (square plug) into the socket on the underside of the
keyboard.
►Insert the rectangular USB plug of the keyboard cable into the USB port of the PC.
10 A26361-K678-Z121-1-7619, edition 1

Preparing for use
Connecting the PC to the mains voltage
100 V - 125 V
200 V - 240 V
a
a
100 V - 125 V
200 V - 240 V
a = Notch for inserting the screwdriver
►Check the voltage setting.
!
Devices with main power switch:
Some units with a main power switch have a wide-range power supply, depending on the
configuration level. This means that manual voltage setting is not necessary for these
devices. Therefore there is no switch available for the voltage setting.
The following refers to the other devices:
The value indicated with an arrow must be compatible with the local rated voltage:
115 = 100 V to 127 V 230 = 200 V bis 240 V
If the voltage setting is incorrect, then lift out the manual voltage adjuster with a
screwdriver (1), turn it to the required setting and reinsert it.
Devices without main power switch:
The visible value must agree with the local mains voltage:
115 = 100 V to 127 V 230 = 200 V bis 240 V
If an incorrect mains voltage is set, push the slide switch all the way into the other possible
position with a pointed object.
A26361-K678-Z121-1-7619, edition 1 11

Preparing for use
2
2
1
►Connect the power cable first to the PC (1) and then to the grounded mains outlet (2).
Initial switch-on: Software will be installed
If the PC is connected to a network, the network protocol is required as well as the user and server
details. Contact your network administrator if you have any questions about these settings.
When you switch on your PC for the first time, the supplied software is installed and configured. You
should plan some time for this, as this process must not be interrupted.
Once the installation has been started the PC must not be switched off!
!During installation the PC may only be rebooted when you are requested to do so!
Otherwise the installation will not be performed correctly. If a fault occurs during the
installation, the contents of the hard disk must be completely restored.
You may need the licence number for Windows during the installation. This number is located on a
sticker on your PC.
12 A26361-K678-Z121-1-7619, edition 1