Fujitsu LifeBook U772 User manual

System
Operating Manual
LIFEBOOK U772

Congratulations, you have decided to buy an
innovative Fujitsu product.
The latest information about our products, useful tips, updates etc. is available
from our website: "http://ts.fujitsu.com"
For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html")
• Your sales partner
• Your sales office
We hope you really enjoy using your new Fujitsu system.

Copyright
Fujitsu Technology Solutions 04/12
Published by
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8)
80807 Munich, Germany
Contact
http://ts.fujitsu.com/support
All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability.
No warranty is offered or liability accepted in regard of the completeness, correctness, or current applicability of any
data or illustrations. Brand names may be protected trademarks of the respective manufacturer and/or protected
by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’
rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html"
Order No. Fujitsu Technology Solutions GmbH: A26391-K364-Z320-1-7619, edition 1

LIFEBOOK U772
Operating Manual
Innovative technology 7
Ports and controls 9
Important notes 11
First-time setup of your device 14
Working with the notebook 17
Security functions 38
Connecting external devices 42
Removing and installing components
during servicing 46
Settings in BIOS Setup Utility 47
Troubleshooting and tips 49
Technical data 56
Manufacturer’s notes 57
Index 58

Microsoft, MS, Windows XP and Windows 7 are registered trademarks of the Microsoft Corporation.
Adobe Reader is a trademark of Adobe Systems Incorporated.
MultiMediaCard is a registered trademark of Infineon Technologies AG
Sony and Memory Stick are registered trademarks of Sony Electronics, Inc.
Manufactured under licence from DTS Licensing Limited. DTS and the symbol
are registered trademarks & DTS Boost is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All rights reserved.
All other trademarks referenced are trademarks or registered trademarks of their
respective owners, whose protected rights are acknowledged.
Copyright © Fujitsu Technology Solutions GmbH 2012
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, in part or in whole.
In the event of violations, perpetrators will be liable to prosecution for damages.
All rights reserved, including rights created by patent grant or registration of a utility model or design.
Subject to availability and technical modifications.

Contents
Contents
Innovativetechnology ................................................................. 7
Furtherinformation ...................................................................... 7
Notational conventions .................................................................. 8
Portsandcontrols ..................................................................... 9
Importantnotes ........................................................................ 11
Safetynotes ............................................................................ 11
Additional safety notes for devices with radio components . . . . . ............................. 11
Energysaving .......................................................................... 12
Energy saving under Windows ....................................................... 12
Travelling with yournotebook ............................................................ 12
Before youtravel ................................................................... 12
Notebook:transporting ............................................................... 13
Cleaning the notebook .................................................................. 13
First-time setup ofyourdevice ......................................................... 14
Unpacking and checking the device ...................................................... 14
Selectingalocat
ion ..................................................................... 15
Mains adapter connecting ............................................................... 15
Switchingonthedevice for the firsttime .................................................. 16
Working withthe notebook ............................................................ 17
Statusindicators ........................................................................ 17
Switching on the notebook . . . . ........................................................... 19
Notebook: switching off .................................................................. 19
Keyboard ............................................................................... 20
Virtualnumerickeypad .............................................................. 22
Keycombinations ................................................................... 22
Country and keyboard settings ....................................................... 24
Touchpadandtouchpad buttons .......................................................... 24
Moving thepointer .................................................................. 24
Selectinganitem .................................................................... 25
Executing commands . . . . . ........................................................... 25
Draggingitems ...................................................................... 25
LCD screen ............................................................................ 26
Webcam ............................................................................... 27
Rechargeable battery ................................................................... 27
Charging,caring for andmaintainingthe battery ....................................... 27
Usingthe power-managementfeatures ................................................... 28
Memorycards .......................................................................... 29
Supported formats .................................................................. 29
Insertingthememorycard ........................................................... 29
Removing the memory card .......................................................... 30
Loudspeakers and microphones . . . ....................................................... 30
SIM card ............................................................................... 31
InsertingtheSIMcard ............................................................... 31
Removing aSIM card ............................................................... 31
Wireless LAN/BlueTooth/UMTS(optional) ................................................ 32
Switching the wireless components on and off . ........................................ 32
SettingupWLANaccess ............................................................ 32
AccessviaUMTS ................................................................... 32
Fujitsu Technology Solutions 3

Contents
Ethernetand LAN ....................................................................... 33
YourPortReplicator ..................................................................... 34
Portson the PortReplicator .......................................................... 34
Connecting the notebook to the Port Replicator . . . . . .................................. 35
Connecting the mains adapter to the Port Replicator . .................................. 36
Switching on the notebook via the port replicator . . . . . .................................. 36
SwitchingoffnotebookviaPortReplicator ............................................. 36
Disconnecting the notebook from the Port Replicator .................................. 37
Securityfunctions ..................................................................... 38
Configuring the fingerprint sensor ........................................................ 38
UsingtheSecurityLock ................................................................. 38
ConfiguringpasswordprotectioninBIOSSetup Utility ...................................... 39
Protecting BIOS Setup Utility (supervisor and user password) . .......................... 39
Password protection for booting of the operating system . .............................. 40
Trusted Platform Module (TPM) (device-dependent) . . . . . .................................. 41
EnablingTPM ....................................................................... 41
DisablingTPM ...................................................................... 41
Connectingexternal devices ........................................................... 42
Connecting USB devices ................................................................ 43
USBport with charging function (AnytimeUSB charge) ................................. 44
How toremoveUSBdevices correctly ................................................ 44
Connecting external audio devices . . . . . . ................................................. 45
Headphone port . . . . . ................................................................ 45
Removing and installing components during servicing . . . .............................. 46
Settings in BIOS Setup Utility . . ........................................................ 47
StartingtheBIOS Setup Utility ........................................................... 47
OperatingBIOSSetupUtility ............................................................. 47
ExitingBIOS SetupUtility ................................................................ 48
Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . ................... 48
Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . ............... 48
Load Setup Defaults – Copy Standard Entries ......................................... 48
Discard Changes – Discard changes without exiting the BIOS Setup Utility ............... 48
Save Changes - save changes without exiting the BIOS Setup Utility . ................... 48
Save Changes and Power Off . . . . . . ................................................. 48
Troubleshooting and tips .............................................................. 49
Helpif problemsoccur ................................................................... 49
Usingthebattery switch-offbutton ........................................................ 50
Restoring the hard disk contents under Windows . ......................................... 50
The notebook’s date ortimeisincorrect ................................................... 51
When certain characters are entered on the keyboard, only numerals are written . . ........... 51
The notebook’s LCDscreen remainsblank ................................................ 51
The LCD screen is difficultto read ........................................................ 51
The externalmonitorremainsblank ...................................................... 52
The externalmonitorisblankortheimage isunstable ..................................... 52
The notebook cannot be started . . ........................................................ 53
The notebookstops working ............................................................. 53
The printer does not print ................................................................ 53
The radio connection to a network does not work . ......................................... 54
Error messages on the screen . . . ........................................................ 54
4 Fujitsu Technology Solutions

Contents
Technicaldata ......................................................................... 56
LIFEBOOK ............................................................................. 56
Rechargeable battery ................................................................... 56
Mains adapter .......................................................................... 56
Manufacturer’s notes .................................................................. 57
Disposal and recycling .................................................................. 57
DeclarationsofConformity ............................................................... 57
CEmarking ............................................................................ 57
Index .................................................................................. 58
Fujitsu Technology Solutions 5

Contents
6 Fujitsu Technology Solutions

Innovative technology
Innovative technology
... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularly
long operating time because of its high capacity battery.
With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better
protect your system against unauthorised access by using the powerful password properties.
Information on the connections and user components of your notebook
canbefoundin"Ports and controls", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site.
The factory installation of your device does not support any other operating
system. Fujitsu Technology Solutions accepts no liability whatsoever
if any other operating system is used.
Software oriented components of these instructions refer to Microsoft products,
if they come within the scope of the delivery.
If you install other software products, pay attention to the operating
instructions of the manufacturer.
Fujitsu Technology Solutions 7

Innovative technology
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://ts.fujitsu.com"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
8 Fujitsu Technology Solutions

Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives
an overview of the indicators and ports of the device. Please familiarise yourself with
these components before you start to work with the device.
Front
1
2
34
5
67
98
5
1 = WebCam (optional)
2 = Status indicators
3 = Application button
4 = ON/OFF switch
5 = Microphone
6 = Fingerprint sensor
7 = Status indicators
8 = Touchpad
9 = Touchpad buttons
Left side
1 2 3 4
1 = DC input connector (DC IN)
2=Kens
ington lock device
3 = USB port 2.0
4=Head
phone port
Fujitsu Technology Solutions 9

Ports and controls
Right side
1 2 3 4
1 = Memory card slot
2 = USB port 3.0 (left without charging
function, right with charging function
(Anytime USB charge))
3 = HDMI port
4 = LAN port
Bottom
2
4
3
11
1 = Loudspeakers
2=SIMcard
slot
3 = Port replicator port
4 = Battery shutdown key (countersunk)
10 Fujitsu Technology Solutions

Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data",
Page 56 and "First-time setup of your device", Page 14 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the notebook", Page 13.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installing
components during servicing", Page 46.
This notebook complies with the relevant safety regulations for data processing
equipment. If you have questions about using your notebook in a particular area,
please contact your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocom ponent:WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your notebook, you
must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
"Switching the wireless components on and off", Page 32.
Fujitsu Technology Solutions 11

Important notes
Energy saving
NotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected devices if you
are not using them. If you use the energy saving functions, the notebook uses less energy.
You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You save money while protecting the environment.
Energy saving under Windows
►Make use of the power management features (see ""Using the power-management features",
Page 28").
Travelling with yournotebook
Mobileope rationNotesTran sporta tionNotebook
Please observe the points listed below when travelling with your notebook.
Before you travel
►Back up important data stored on your hard disk.
NotebookTravel,noteboo k
►Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
►If you wish to use your notebook during a flight, first check with the flight
attendants if it is OK to do so.
When travelling in other countries
►If you are travelling abroad, check that the mains adapter can be operated with the
local mains voltage. If this is not the case, obtain the appropriate mains adapter for
your notebook. Do not use any other voltage converter!
►Check whether the local mains voltage and the power cable are compatible. If this is
not the case, buy a power cable that matches the local conditions.
►Enquire with the corresponding government office of the country you will be
travelling in as to whether you may operate the radio component integrated in
your notebook there (see also "CE marking", Page 57).
12 Fujitsu Technology Solutions

Important notes
Notebook: transporting
Protect the notebook from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
►If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.
Transportatio nNotebook
►Switch the notebook off.
►Unplug the mains adapter and all external devices from the power socket.
►Disconnect the mains adapter cable and the data cables for all external devices.
►Close the LCD screen.
►To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Cleaning the notebook
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
device, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the display
surface with a very soft, slightly damp cloth.
►Switch the notebook off.
CleaningNotesNotebookKeyboardTouchpadLCDscreenCrystal Viewdisplay
►To prevent accidental activation of the device, remove the power plug of
the mains adapter from the power socket.
The surface may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has
been dipped in water mixed with mild domestic detergent and then carefully wrung out.
To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Ensure that no liquid enters the device.
Fujitsu Technology Solutions 13

First-time setup of your device
First-time setup of your device
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 11.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the mains adapter, see "Mains adapter connecting", Page 15.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
►Unpack all the individual parts.
PackagingTransport
►Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
14 Fujitsu Technology Solutions

First-time setup of your device
Selecting a location
SelectingalocationDeviceM ainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingf oroperationMainsadapt er
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
►Connect the power cable (1) to the
mains adapter.
►Plug the mains cable (2) into a mains outlet.
►Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu Technology Solutions 15

First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst tim e
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
►Switch on your device.
►During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "http://ts.fujitsu.com/support".
16 Fujitsu Technology Solutions