Fujitsu fa-19w1s-h2a User manual

This LCD monitor has been already
approved by safety certification agencies in
right, and you should use it according to
the user manual, please.

1
Contents
PACKAGE CONTENTS…………………………………………………………………………………….2
PRODUCT……………………………………………………………………………………………………3
Contents....................................................................................................................................................................3
Features....................................................................................................................................................................3
Power saver ..............................................................................................................................................................3
Plug & play................................................................................................................................................................3
SAFETY ...........................................................................................................................................4
Electrical....................................................................................................................................................................4
Common....................................................................................................................................................................5
SET UP YOUR LCD MONITOR .......................................................................................................6
Installation .................................................................................................................................................................6
Screen Adjustments ..................................................................................................................................................6
OSD Control..............................................................................................................................................................7
Description ................................................................................................................................................................9
TROUBLE SHOOTING..................................................................................................................10
MAINTENANCE............................................................................................................................. 11
SPECIFICATIONS …………………………………………………………………………………………12

2
Package Contents
Main
The LCD monitor and the stand.
Accessory
All of accessories have been tested and qualified. Do not use any non-
qualified accessories
with this LCD monitor.
DC Adapter (POTRANS: UP06511190 or DELTA:ADP-65MB B).
Power Cord.
15-pin D-Sub Signal Cable.
Audio Cable.
User Manual (CD-ROM).
Quick Guide
Warranty card
Features
48.4cm (19” Wide Screen) TFT LCD Monitor.
Supports Resolutions up to 1440 x 900.
Safety Precautions
Caution
：
：：
： This LCD monitor must be operated with the original accessories.
 This set must be operated with the correct power supply.
 Do not let children use this LCD monitor alone.
 Viewing the User Manual for other safety precautions.
Quick Setup
The setup steps are described as following: (Step 2 to 4 are illustrated on the overleaf of the
cover.)
1. Shutdown your computer and unplug.
2. Please combine the LCD monitor with the stand tightly
3. Connect the 15-pin D-Sub (or DVI-D, optional) signal cable and Audio cable to the
computer and the LCD monitor.
4.Connect the LCD monitor power cord to AC power input socket firmly and completely.
5.Use the cable tie to bind up the power cord and the D-sub signal cable/ DVI-D cable.
6.After installation, please turn on the LCD monitor and the computer, respectively.
7.About function adjustment and troubleshooting, please refer to the content of the
CD-ROM.

3
PRODUCT
Note ： Save the original box and packing material for future shipping needs.
Contents
LCD monitor and Base. Please refer to Quick Setup.
Accessories for this LCD monitor Model. Please refer to Quick Setup.
Features
Bright image
Lightweight
Fast response time
Stereo speakers (If there is no speaker installed, please skip this item.)
Power saving features
Low electromagnetic radiation output
Kensington security lock
Safety certifications
Power saver
Power control system, also called (Power Saver), is installed inside the LCD monitor.
If the monitor has not been used for a certain period of time, the
system will turn the
monitor to low voltage mode to save power. Slight movement of the mouse
or any
pressing key on the keyboard will return the original image.
The VGA card inside the computer configures Power Saver. You can use your PC
to
set the function.
The LCD monitor is compatible with EPA ENERGY STAR and NÜTEK if used with a
VESA DPMS computer.
To save power, turn off the LCD monitor power when not in use.
Plug & play
The new VESA Plug and Play function is used, eliminating
the complicated and
time-consuming installation process.
Use the Plug and Play system without encountering the
usual installation problems.
Your computer system can easily identify and automatically adjust the monitor.
The LCD monitor uses Display Data Channel (DDC) to send E
xtended Display
Identification Data (EDID)
to the computer system, so the computer system can
auto adjust your monitor.

4
SAFETY
Note: Note the following safety precautions before using this monitor.
Electrical
Check the Voltage This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Electrical Shock This product is equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
To prevent electrical shock, do not insert any metal object into any opening in the
LCD
monitor casing.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
If the power cord is damaged, do not use the
LCD monitor. Do not place any object on
the power cord, and place the power cord away from crowded areas.
While pulling the LCD monitor plug away from the socket on the wall, hold the plug not
the power cord.
Do not expose the LCD monitor to rain and do not use in environments near water
(such as in the kitchen, or near a swimming pool).
If the LCD monitor becomes wet, unplug the power cord immediately
and contact a
Service Center.
Unusual conditions If the LCD monitor begins to perform abnormally, makes a noise, or emits smoke or
odors, unplug it immediately and contact a service center.

5
Common
Monitor
and Screen
Care
Avoid touching the screen with your fingers or any hard objects. Oil from the skin is
difficult to remove, and touching the screen with anything may damage the panel.
Clean the monitor using a soft, dry cloth after first turning it off.
The LCD monitor should not be used in dusty or humid environments.
The LCD monitor should be kept away from heat sources and radiation. Such as:
stoves, ovens, or direct sunlight.
To reduce glare, avoid placing the monitor in a place that receives direct sunlight.
Avoid letting small children play with monitor. Frequent touching of the panel will
leave
marks on the screen and lower the image quality.
Handle with care when unplugging and moving the monitor.
Do not place items on top of the LCD monitor.
If the LCD monitor is not in use for a long time, unplug
it and store it in the proper
package. The original carton and packaging should be used if possible.
The openings in the LCD monitor
casing are for ventilation. To prevent overheating,
the openings should not be blocked or covered. Do not place the LCD monitor on a
bed, sofa, blanket or other soft surfaces; as soft objects may block the vents in the
LCD monitor.
If you place the LCD monitor on a bookshelf or other enclosed space, it is essential to
leave an air-space of 4-inches (10cm) between the monitor and the enclosure.
Cleaning the screen Ensure that the area around the LCD monitor is clean and free of moisture. Please
refer to "Maintenance" for normal maintenance information.

6
SET UP YOUR LCD MONITOR
Installation
Note: Read the last section “Safety” before you install the LCD monitor.
Notes Note the instructions below prior to installing your LCD monitor.
Installation Position For the best image quality, choose a position away from any windows to minimize
reflection of light on the panel.
It is important to view the LCD monitor from at least 30 cm to minimize eyestrain.
Workstation Height Position the LCD monitor slightly above your horizontal vision.
Angle of Vision Tilt the LCD monitor either forward or backward for the most comfortable viewing
angle.
Quick Installation
 This LCD monitor supports connection to a personal computer or workstation. The
steps are described as Quick Setup.
After installation, refer to “Auto Adjust” for automatic adjustment procedures.
Screen
Adjustments
Auto Adjust Though your computer system can automatically identify the new LCD monitor system,
the
Auto Adjust function can enhance the display. To enter adjust mode, refer to “OSD Control”.
Turn the computer and LCD monitor on.
Press the ‘Auto’ button to start Auto Adjust.
The LCD monitor starts the Auto Adjust process. The process will continue for 10
seconds. You will notice the image change as the Auto Adjust is working.
Self Test Function
Check (STFC):
Your LCD monitor provides a STFC function
, through which you can check whether
the LCD monitor is working properly.
If your LCD
monitor is properly connected, but there is no image showing and the
indicator light remains orange, follow these steps to start STFC.
 Shutdown computer and LCD monitor.
 Unplug the signal connector from the back of computer.
 Turn the LCD monitor on.
If the image connector is disconnected or damaged, the following message
will
appear during normal operation.
 Turn off the LCD monitor and reconnect the signal cable. Turn the
computer and
LCD monitor on.
If the LED on the LCD monitor remains orange
after completing the steps above,
check your VGA c
ard, cable, and computer system. Your monitor should be
operating properly.

7
OSD Control
The user-friendly OSD (On Screen Display) design enables you to
adjust your monitor
using the keypad on the front panel.
Keypad Button
Definition
1 Speakers Audio output. ( If there is no speaker installed, please skip
this item.)
2 Turbo/
▲ •Switch between picture, text and economy modes.
•Move selection up when OSD is displayed.
3 Auto/
▼
•Automatically optimize positions, phase, and clock
when OSD is not displayed.
•Move selection down when OSD is displayed.
4 /
•Quick contrast adjustment and decrease
contrast/brightness.
•Move selection left when OSD is displayed.
5 /
•Quick brightness adjustment and increase
contrast/brightness.
•Move selection right when OSD is displayed.
6
Enter and exit the OSD menu.
7
Power On/Off button and indicator LED.
Green: Normal.
Orange: Power Saving.
Off: Power Off.

8
Operation Your LCD monitor has been adjusted to its optimal setting
s before shipment. You can also
adjust the image using the following illustrations and steps.
Press the “Menu” button to display the OSD.
Press the ▲ or ▼ button to select the function to be adjusted.
Press the  button to access the function to be adjusted.
Press the  or  buttons to change the current setting of the function.
To go back to the previous menu, press the button . Changes are saved
automatically.
To exit the OSD menu press "Menu" again.
-Position
50
Notes The OSD turns off several seconds after you stop pressing the buttons while
performing an adjustment.
Any changes are auto
matically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the menu.
Adjustments for clock, phase and positions are saved for each individual signal
timing. Except for these adjustments, all other adjustments have only one setting,
which applies to all signal timings.
To select function, click the blue cursor on the desired option.
Audio Menu (If there is
no speaker installed,
please skip this item.)
Misc. Menu
Image Menu
Info. Menu
Color Temp. Menu

9
Function Definition
Primary
Menu
Secondary
Menu
Description
Image Brightness Adjust the brightness of the screen.
Contrast Adjust the contrast of the image.
Sharpness Adjust the picture sharpness of low resolution pictures.
Clock Adjust the monitor clock. (Optional)
Phase Adjust the monitor phase. (Optional)
H. Position Move the image left or right on the screen. (Optional)
V. Position Move the image up or down on the screen. (Optional)
Audio
Volume
A djust the volume of the audio.
(If there is no
speaker
installed, please
skip this item.)
Mute
Disable the audio.
Color Color temp User/9300K/7500K/6500K/sRGB
Red Adjust red color.
Green Adjust green color.
Blue Adjust blue color.
Misc
Language English, Français, Deutsch, Español, Italiano,
日 本 語
,
Русский, 繁體中文 , 简体中文 , 한국어
OSD time-out Adjust OSD display time setting.
OSD position Move OSD display position
to any one of the following 5
positions within the overall screen.
Reset Restore LCD monitor to factory settings.
Input Select Analog / Digital
Auto setting Adjust clock, phase and positions automatically. (Optional)
CM Engine Color Management Engine. (Optional)
Info Resolution Displays resolution.
Horizontal
frequency Displays horizontal frequency.
Vertical
frequency Displays vertical frequency.
Version Displays firmware version.
Quick Adjustment You can skip the Menu pages and display an adjustment scale directly by using the
following button operations:
Brightness: Press the Brightness button when the Menu is not displayed.
Contrast: Press the Contrast button when the Menu is not displayed.
Auto Setting: Press the Auto button when the Menu is not displayed.
Turbo:
Press the Turbo button when the Menu is not displayed to switch between
picture modes.
 Picture Mode - High brightness
 Text Mode - Normal
 Economy Mode - Brightness of back-light is reduced
 Changing to a lower brightness mode can lessen eye fatigue.
 Change from Picture Mode to Text Mode when working with text.
 Change from Text Mode to Economy Modes when viewing the screen for long periods.
3
1
5
2
4