Fujitsu D3071-S User manual

TechNotes V2.0
Industrial Mainboards
D3071-S / D3076-S

a
g
e
2
Page
TechNotes D307x-S V2.0 Page 2 of 56 www.ts.fujitsu.com/mainboards
Content
1Safety Instructions 4
2Feature Overview D307x-S 5
2.1 Basic Layout 9
2.2 Block Diagram 10
2.3 External Connectors D3071-S 11
2.4 External Connectors D3076-S 12
2.5 Onboard components D3076-S 13
2.6 Onboard components D3071-S 14
2.7 I/O-Shield 15
3Interfaces & Connectors 17
3.1 Frontpanel Connector 17
3.2 Internal Parallel Port Connector 18
3.3 Internal COM2 Connector 18
3.4 Internal USB Connector (2 x 2 Ports) 19
3.5 Internal USB Flash Drive Connector (1 port) 19
3.6 Internal USB Stick Connector (1 port) 19
3.7 Fan Connector 20
3.8 Power Supply Fan Connector 20
3.9 High Definition Frontpanel Audio Connector (HD Audio) 21
3.10 AC97 Frontpanel Audio Connector (Legacy Audio) 21
3.11 Power Supply Connector 22
3.12 Additional Power Supply Connector 22
3.13 GPIO Connector 23
3.14 Chassis Intrusion 24
4System Monitoring 25
4.1 D307x-S: Temperature Sensors and Fan Connectors 26
4.2 D307x-S: SystemGuard 27
4.3 D307x-S: SystemGuard - Details 28

a
g
e
3
Page
TechNotes D307x-S V2.0 Page 3 of 56 www.ts.fujitsu.com/mainboards
4.4 SilentFanConfigManager –Customize System Monitoring Settings 29
4.5 Components for continous operation @ 60°C 32
4.6 Capacitor Endurance Time Comparison 33
4.7 Thermography D307x-S 34
4.8 Temperature Reference Points D307x-S 35
5Power Supply 36
5.1 ATX Power Supply 36
6Display Options 37
6.1 VGA Output 37
6.2 DVI Output 38
6.3 HDMI Output 39
6.4 DisplayPort Output 40
6.5 Dual DVI Output 41
6.6 Multi Monitor Output 42
7Operating System Support 43
7.1 Support for Windows XP / Windows 7 44
7.2 Linux Status 45
8Mainboard Tools 46
Common Mainboard Tools 46
8.1 BIOS Boot Logo Tool 46
8.2 EditCMOS 46
8.3 OEMIDENT 46
8.4 SystemGuard 47
Industrial Tools 48
8.5 SilentFanConfig-Manager 48
8.6 Windows System-Monitoring API (BMCAPI) 48
8.7 Linux System-Monitoring Driver (“LM-Sensors”) 48
9Known Issues & Important Notes 49
9.1 Windows XP Installation in AHCI mode –necessary adjustments 49
9.2 RAID / AHCI driver disk installation (Windows XP) from floppy disk 50
10 Miscellaneous 51
10.1 System Watchdog (WD) 51
10.2 BIOS Update / BIOS Recovery 54

a
g
e
4
Page
TechNotes D307x-S V2.0 Page 4 of 56 www.ts.fujitsu.com/mainboards
1 Safety Instructions
3 Copyright2011FUJITSU
TechNotesD307x-S V1.1
Safety Instructions
Do not connect or disconnect any cables or modules to or from any onboard connectors (except
for the rear I/O connectors) until the mainboard is completely powered down.
Any damage causedto the mainboard by misuse of the onboard connectors is excluded from the
standard warranty. Fujitsu Technology Solutions cannot be held liable for any damage that results
from incorrect use of any onboard connectors.
The system integrator is fully responsible for the usage of appropriate connectors and cables in
order to fulfill the technical requirements (electrical contact, durability, power/current levels,
signal integrity etc.)

a
g
e
5
Page
TechNotes D307x-S V2.0 Page 5 of 56 www.ts.fujitsu.com/mainboards
2 Feature Overview D307x-S
•Based on latest Intel Cougarpoint single-chip technology (iQ67)
•Support for full range of latest LGA1155 processors (up to 95W)
•Intel® Core™ i7 – 2xxx processor series
•Intel® Core™ i5 – 2xxx processor series
•Intel® Core™ i3 – 2xxx processor series
•Intel® Pentium® G8xx/G6xx processor series
•Intel® Celeron® Gxxx processor series
Note: Intel IvyBridge processors (22nm) are not supported!
•iAMT 7 / VPro 2011 Manageabilty Support
Note: Available feature set depends on installed processor
•Four memory sockets DDR3/1333 supporting up to 32GB
•15µ gold plating for improved durability and reliability
•Dual Intel Gbit LAN onboard
•Link Aggregation support (Teaming, Bonding)
•iAMT support

a
g
e
6
Page
TechNotes D307x-S V2.0 Page 6 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
•Trusted Platform Module TPM V1.2 (Infineon) onboard
•Latest Intel®HD Graphics (integrated in processor)
•Simultaneous use of integrated graphics and PCIe graphics possible
•PCI Express Gen2
•State-of-the-art performance provided by all PCIe extension slots
•5.1 multichannel audio onboard
•8-Bit GPIO onboard
•6-Layer PCB (Tin Plating)
•Improved electrical signal quality
•Improved durability

a
g
e
7
Page
TechNotes D307x-S V2.0 Page 7 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
Designed & approved for enhanced operating temperature
range from 0°C to 60°C
Designed & approved for 24/7 continuous operation
High Efficient core voltage regulator design (89% @ 65W, 86% @ 95W)
Extended lifecycle up to 5 years

a
g
e
8
Page
TechNotes D307x-S V2.0 Page 8 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
Internal socket for USB stick
Install your USB dongle inside
the chassis w/o danger of theft
Avoids possible EMI issue with
external USB stick
Internal socket for USB flashdrive
Easy integration of flashdrives for Embedded OS or memory
extension. Mainboard prepared for mechanical fastener
8 Bit GPIO Port
Easy extension e.g. for status LEDs
Easy SW integration via Windows API
Pin layout compatible with D2703-S, D2963-S, D3003-S
Hardware Watchdog
Incl. BIOS/Boot and OS supervision
Easy SW integration via Windows API & Linux Driver

a
g
e
9
Page
TechNotes D307x-S V2.0 Page 9 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
2.1 Basic Layout

Feature Overview D307x-S
2.2 Block Diagram
SM Bus
SPI Bus
PCIe x16
PCIe Link
FDI-Link
PCIe x16
Slot
Memory Bus Channel B
DMI Link
2 DIMM Sockets
DDR 3 with 1066/1333
PCI-Bus
LGA1155 CPU
IntelPCH
Clock
Synthesizer
HD Audio Link
LPC-Bus
2 DIMM Sockets
DDR 3 with 1066/1333
Audio
Conexant
20642
PCI Slots
32Bit / 33MHz
Super I/O
SMSC
SCH5636
2x Serial Port
Serial Ports
PS2 Ports
Intrusion
Serial ATA
6 Channels
14 USB Ports
PCIe x1 or
PCIe x8
(1 lane)
Slots
I/O Rear: Micro In
PCIe Link
I/O Rear: Line out
I/O Rear: Line in
I/O Front: Head out
I/O Front: Micro in
Internal: Speaker
TPM 1.2
Infineon
Ethernet1
Intel
82579DM
LAN RJ45
SPI Flash
BMC
Parallel Port
Memory Bus Channel A
Video
VGA,DVI,
DisplayPort-
Support
Ethernet2
Intel
82574L
LAN RJ45

Feature Overview D307x-S
2.3 External Connectors D3071-S
PS/2 Kbd-Mouse
4 x USB 2.0
DisplayPort
COM1; DVI-I
LAN2; 2 x USB 2.0
LAN1; 2 x USB 2.0
Audio

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 12 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
2.4 External Connectors D3076-S
PS/2 Kbd-Mouse
4 x USB 2.0
DisplayPort
COM1; DVI-I
LAN2; 2 x USB 2.0
LAN1; 2 x USB 2.0
Audio

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 13 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
2.5 Onboard components D3076-S
Intrusion
Frontpanel Audio
Fan 2 (PWM)
Fan 3 (PWM or 3-pin)
Buzzer
2 x USB
2 x USB
6 Layer PCB
4 x PCI
PCIe x8 (1 Lane, Gen2)
PCIe x16 (16 Lanes, Gen2)
PCIe x16 (4 Lanes, Gen2)
Fan 4 (PWM)
1 x USB (Flashdrive)
4 x SATA II
Socket for USB Stick
12V Supply (Processor)
Parallel Port
COM2 Port
Processor LGA1155
Processor Fan (PWM)
4 x DDR3 (15µ gold plating)
PS Fan Control
8 Bit GPIO
Frontpanel
2 x SATA III
SCSI LED
24 pin ATX PS

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 14 of 56 www.ts.fujitsu.com/mainboards
Feature Overview D307x-S
2.6 Onboard components D3071-S
Frontpanel
8 Bit GPIO
PS Fan Control
4 x DDR3 (15µ gold plating)
Processor Fan (4 pin)
Processor LGA1155
COM2 Port
Parallel Port
12V Supply (Processor)
Socket for USB Stick
PCIe x16 (16 Lanes, Gen2
PCIe x16 (4 Lanes, Gen2)
24 pin ATX PS
SCSI LED
2 x SATA III
4 x SATA II
1 x USB (Flashdrive)
2 x USB
2 x USB
Buzzer
Fan 4 (supports 3 & 4 pin)
Fan 3 (4 pin)
Fan 2 (4 pin)
Intrusion
Frontpanel Audio
6 Layer PCB
2 x PCI

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 15 of 56 www.ts.fujitsu.com/mainboards
Feature Overview
2.7 I/O-Shield
Spring Steel Sheet
Enforcement Sheet
Spring Steel Sheet
Gasket = Foam with
Aluminium
(front view)
(rear view)

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 16 of 56 www.ts.fujitsu.com/mainboards
Feature Overview
I/O-Shield
Apparatus to evaluate and specify
insertion force of FTS IO shield.
Nominal force: ~ 150 –200 N
for specified ATX IO “letterbox”
Note: ATX Chassis “letterbox” for I/O shield:
Nom. size = 158.75 x 44.45mm
Tolerance = +/- 0.2mm

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 17 of 56 www.ts.fujitsu.com/mainboards
3 Interfaces & Connectors
3.1 Frontpanel Connector
Power LED:
Anode: Pin 2 –80R Pullup to 5V_AUX
Cathode: Pin 4 –output (12mA)
Alert LED:
Anode: Pin 13 - 220R Pullup to 3,3V
Cathode: Pin14 –output (4mA)
HDD LED:
Anode: Pin 1 –365R Pullup to 5V
Cathode: Pin 3 –output (6mA ; ~ 0.7V low level)
Speaker Output:
Differential audio signal; max. 0.5W / 8Ohm

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 18 of 56 www.ts.fujitsu.com/mainboards
Interfaces & Connectors
3.2 Internal Parallel Port Connector
3.3 Internal COM2 Connector
optional Parallelport cable
with ATX bracket
optional COM2-cable
with ATX bracket

a
g
e
1
Page
TechNotes D307x-S V2.0 Page 19 of 56 www.ts.fujitsu.com/mainboards
Interfaces & Connectors
3.4 Internal USB Connector (2 x 2 Ports)
3.5 Internal USB Flash Drive Connector (1 port)
3.6 Internal USB Stick Connector (1 port)

a
g
e
2
Page
TechNotes D307x-S V2.0 Page 20 of 56 www.ts.fujitsu.com/mainboards
Interfaces & Connectors
3.7 Fan Connector
Note:
3pin mode (voltage controlled): Supported by Fan3 only (3pin/4pin mode selectable in BIOS Setup)!
If a 3-wire fan is connected, but BIOS Setup is set to “4-Pin” (= Default) the fan will operate at full speed (=12V).
In 3-wire mode, the default minimum operating voltage is set to ~ 6V.
3.8 Power Supply Fan Connector
Note: This feature is not supported by standard ATX power supplies!
Fan4 and PS Fan connector must not be used simultaneously!
Note:
Fans must never be attached or
removed while the system is
powered. Mainboard may be
damaged!