Fujitsu D1271 User manual

SYSTEM BOARD D1271 / D1291
SYSTEM BOARD D1271 / D1291SYSTEM BOARD D1271 / D1291
SYSTEM BOARD D1271 / D1291
TECHNICAL MANUAL
TECHNICAL MANUALTECHNICAL MANUAL
TECHNICAL MANUAL

Are there ...
... any technical problems or other questions which you would like to be clarified?
Please contact:
• your sales partner
• your sales outlet
You will find further information in the manual "Safety, Warranty and
Ergonomics".
The latest information on our products, tips, updates, etc., can be found on the
Internet under: http://www.fujitsu-siemens.com

Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1271-Z120-1-7619
A26361-D1271-Z120-1-7619A26361-D1271-Z120-1-7619
A26361-D1271-Z120-1-7619
Printed in the Federal Republic of Germany
AG 0101 01/01
A26361-D1271-Z120-1-7619
SYSTEM BOARD D1271 / D1291 TECHNICAL MANUAL

SYSTEM BOARD
D1271 / D1291
Technical Manual
Introduction
Features
Hardware Setup
BIOS Setup
January 2001 edition

Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
VESA and DPMS are trademarks of Video Electronics Standards Association.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
Copyright ãFujitsu Siemens Computers GmbH 2001
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de

D1271 / D1291 CUV-LSV / CUV-LV User's Manual 3
This manual describes server system board
D1271 - CUV-LSV
and
D1291 - CUV-LV.

D1271 / D1291 CUV-LSV /CUV-LVUser’s Manual
4
CONTENTS
1. INTRODUCTION ............................................................................. 7
1.1 How This Manual Is Organized ................................................... 7
1.2 Item Checklist .............................................................................. 7
2. FEATURES ........................................................................................ 8
2.1 CUV-LSV/LVMotherboard......................................................... 8
2.1.1 Specifications ..................................................................... 8
2.1.2 Special Features................................................................ 10
2.1.3 Performance Features ....................................................... 10
2.1.4 Intelligence ....................................................................... 11
2.2 Motherboard Components.......................................................... 12
2.2.1 Component Locations....................................................... 13
3. HARDWARE SETUP ...................................................................... 14
3.1 Motherboard Layout .................................................................. 14
3.2 Layout Contents ......................................................................... 15
3.3 Hardware Setup Procedure......................................................... 16
3.4 Motherboard Settings ................................................................. 16
3.5 System Memory ......................................................................... 23
3.5.1 General DIMM Notes....................................................... 23
3.5.2 Memory Installation ......................................................... 24
3.6 Central Processing Unit (CPU) .................................................. 25
3.6.1 CPU Installation ............................................................... 26
3.7 Expansion Cards ........................................................................ 27
3.7.1 Installing an Expansion Card ........................................... 27
3.7.2 Assigning IRQs for Expansion Cards .............................. 28
3.8 Connectors ................................................................................ 29
3.8.1 External Connectors ......................................................... 29
3.8.2 Internal Connectors .......................................................... 32
3.9 Starting Up the First Time.......................................................... 40

D1271/D1291 CUV-LSV/CUV-LV User’s Manual 5
CONTENTS
4. BIOS SETUP..................................................................................... 41
4.1 Managing and Updating Your BIOS .......................................... 41
4.1.1 Upon First Use of the Computer System.......................... 41
4.1.2 Updating BIOS Procedures .............................................. 43
4.2 BIOS Setup Program.................................................................. 45
4.2.1 BIOS Menu Bar................................................................ 46
4.2.2 Legend Bar ....................................................................... 46
4.3 Main Menu ................................................................................. 48
4.3.1 Primary & Secondary Master/Slave ................................. 49
4.3.2 Keyboard Features............................................................ 52
4.4 Advanced Menu ......................................................................... 54
4.4.1 Chip Configuration ........................................................... 56
4.4.2 I/O Device Configuration ................................................. 59
4.4.3 PCI Configuration ............................................................ 61
4.4.4 Shadow Configuration ...................................................... 64
4.5 Power Menu ............................................................................... 65
4.5.1 Power Up Control............................................................. 67
4.5.2 Hardware Monitor ............................................................ 68
4.6 Boot Menu ................................................................................. 69
4.7 Server Menu ............................................................................... 71
4.8 Exit Menu................................................................................... 73

D1271 / D1291 CUV-LSV / CUV-LV User’s Manual
6
FCC & DOC COMPLIANCE
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with manufacturer's instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING!Anychanges ormodificationsto this productnotexpressly approved
by the manufacturer could void any assurances of safety or performance and
could result in violation of Part 15 of the FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the
Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Cetappareil numérique delaclasseBestconforme à lanormeNMB-003duCanada.

D1271/D1291 CUV-LSV/CUV-LVUser’s Manual 7
1.1 How This Manual Is Organized
This manual is divided into the following sections:
1. INTRODUCTION Manual information and checklist
2. FEATURES Production information and specifications
3. HARDWARE SETUP Instructions on setting up the motherboard.
4. BIOS SETUP Instructions on setting up the BIOS
5. SOFTWARE SETUP Instructions on setting up the included software
6. SOFTWARE REFERENCE Reference material for the included software
7. APPENDIX Optional items and general reference
1.2 Item Checklist
Check that your package is complete. If you discover damaged or missing items,
contact your retailer.
1. INTRODUCTION
1. INTRODUCTION
Manual / Checklist
Package Contents
(1) Motherboard
(1) 40-pin 80-conductor ribbon
cable for internal UltraDMA/
66 or UltraDMA/33 IDE
drives
(1) Ribbon cable for two 3.5”
floppy disk drives
(1) Bag of spare jumper caps
(1) Support CD with
drivers and utilities
(1) User’s Manual
Optional Items
IrDA-compliant infrared
module
PCI-L101 Wake-On-LAN
10/100 Ethernet Card
2-port USB Connector Set

8D1271 / D1291 CUV-LSV / CUV-LV User’s Manual
2.1 CUV-LSV/LV Motherboard
The CUV-LSV motherboard is targeted diversely for home PCs and entry-
level workstations and servers. Powered by Intel
®
Pentium
®
III and Celeron™
processors, the CUV-LSV efficiently complies with today’s demand for a flexible
yet affordable system.
2.1.1 Specifications
•Latest Processor Support
Intel Pentium
®
III 133MHz FSB Coppermine core FC-PGA
Intel Pentium
®
III 100MHz FSB Coppermine core FC-PGA
Intel Celeron™66MHz FSB Mendocino core PPGA
•North Bridge System Chipset: Features theVIAVT82C694X system controller
that supports AGP 2X mode, 133/100/66MHz Front Side Bus (FSB), and
133/100/66MHz memory bus.
•South Bridge System Chipset: VIA VT82C686A PCIset with PCI Super I/O
integrated peripheralcontroller supportsUltraDMA/66 for burst modedata transfer
rates of up to 66.6MB/sec and four USB ports.
•PC133SDRAM/VC133VCM/ HSDRAM Support: Equipped with four Dual
InlineMemory Module(DIMM)sockets tosupportIntel PC133/PC100-compliant
(16,32, 64,128, 256, or 512MB), NEC’sVC133-compliantVirtualChannel (VC)
SDRAM, or Enhanced Memory System’s High-speed DRAMs (HSDRAMs) up
to 1GB. VC SDRAM and HSDRAM are new DRAM core architectures that
dramatically improves the memory system’s ability to service high multimedia
requirements.
•JumperFree™Mode: Allows processor settings and easy overclocking of
frequency and Vcore voltage all through BIOS setup when the JumperFree™
mode is enabled. Easy-to-use DIP switches instead of jumpers are included to
allow manual adjustment of the processor external/internal frequency.
•UltraSCSISupport:Equippedwiththe LSI 53C1010-33 Ultra160/Ultra3 64-bit
33MHz dual-channel SCSI controller that supports up to 30 SCSI devices. BIOS
configurable onboard SCSI settings.
•UltraDMA/66Support:Comes with an onboard PCI Bus Master IDE controller
with two connectors that support four IDE devices on two channels. Supports
UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4, and Enhanced IDE devices,
such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives.
•LAN Support: Features the Intel 82559 Fast-Ethernet LAN controller that fully
supports 10BASE-T/100BASE-TX.
•Wake-On-LAN Connector: Supports Wake-On-LAN activity through an
optional PCI-L101 10/100 Fast Ethernet PCI card.
2. FEATURES
Specifications
2. FEATURES

D1271/D1291 CUV-LSV/CUV-LV User’s Manual 9
2. FEATURES
2. FEATURES
Specifications
•Wake-On-Ring Connector: Supports Wake-On-Ring activity through a PCI
modem card through a WOR connector.
•PC Health Monitoring: Provides an easy way to examine and manage system
status information, such as CPU and system voltages, temperatures, and fan
status through the onboard hardware ASIC and the bundled PC
Probe.
•SMBus: Features the System Management Bus interface used to physically
transport commands and information between SMBus devices.
•PCI Expansion Slots: Provides four 32-bit PCI (Rev. 2.2) expansion slots that
support Bus Master PCI cards, such as SCSI or LAN cards, with 133MB/s
maximum throughput.
•Super Multi-I/O: Provides two high-speed UART compatible serial ports and
one parallel port with EPP and ECP capabilities. UART2 can also be directed
from COM2 to the Infrared Module for wireless connections.
•Smart BIOS: 4MB firmware provides Vcore and CPU/SDRAM frequency
adjustments,bootblock write protection, andHD/SCSI/MO/ZIP/CD/Floppyboot
selection.
•EnhancedACPIandAnti-BootVirus Protection:Programmable BIOS (Flash
EEPROM), offering enhanced ACPI for Windows 98 compatibility, built-in
firmware-based virus protection, and autodetection of most devices for a virtual
automatic setup.
•IrDA: Supports an optional infrared port module for wireless interface.
•Desktop Management Interface (DMI): Supports DMI through BIOS, which
allows hardware to communicate within a standard protocol creating a higher
level of compatibility. (Requires DMI-enabled components.)
•Onboard LED: Comes with a power LEDthat lights up if there is any standby
power on the motherboard. This LED acts as a reminder to turn off the system
power before plugging or unplugging devices to prevent damage to the
motherboard, peripherals, and other system components.

10 D1271 / D1291 CUV-LSV / CUV-LV User’s Manual
2. FEATURES
Features
2. FEATURES
2.1.2 Special Features
•ACPISupport:AdvancedConfigurationPowerInterface (ACPI) provides more
Energy Saving Features for operating systems that support OS Direct Power
Management (OSPM) functionality. With these features implemented in the OS,
PCs can be ready around the clock, yet satisfy all the energy saving standards.
To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows
98 must be used.
•Easy Installation: Incorporates BIOS that supports autodetection of hard disk
drives, PS/2 mouse, and Plug and Play devices to make the setup of hard disk
drives, expansion cards, and other devices virtually automatic.
•PC’99 Compliant: Both the BIOS and hardware levels of smart series
motherboards are PC’99 compliant. The new PC’99 requirements for systems
and components are based on the following high-level goals: Support for Plug-
n-Play compatibility and power management for configuring and managing all
system components, and 32-bit device drivers and installation procedures for
Windows 95/98/NT. Color-coded connectors and descriptive icons make
identification easy as required by PC’99.
2.1.3 Performance Features
•ConcurrentPCI:ConcurrentPCI allows multiple PCI transfers from PCImaster
busses to the memory and processor.
•High-Speed Data Transfer Interface: IDE transfers using UltraDMA/33 Bus
Master IDE can handle rates up to 33MB/s. This motherboard with its chipset
and support for UltraDMA/66 doubles the UltraDMA/33 burst transfer rate to
66.6MB/s. UltraDMA/66 is backward compatible with both DMA/33 and with
existing DMA devices so there is no need to upgrade current EIDE/IDE drives.
(UltraDMA/66 requires a 40-pin 80-conductor cable).
•VCM/SDRAM Optimized Performance: This motherboard supports the new
generation memory, NEC 64Mb Virtual Channel Memory (VCM) Synchronous
Dynamic RandomAccess Memory (SDRAM), that is compatible to the industry
standard SDRAM. The VCM’s core design provides up to 50% higher SDRAM
speed at reduced power consumption of about 30%. This motherboard also
supportsthe standard SDRAM for a the data transfer rate of up to 1.064GB/s using
PC133-compliant SDRAMs and up to 800MB/s using PC100-compliant
SDRAMs).

D1271/D1291 CUV-LSV/CUV-LV User’s Manual 11
2. FEATURES
2. FEATURES
Intelligence
2.1.4 Intelligence
•Auto Fan Off: The system fans powers off automatically even in sleep mode.
This function reduces both energy consumption and system noise, and is an
important feature in implementing silent PC systems.
•DualFunctionPowerButton:Pushing the power button for less than 4 seconds
when the system is in the working state places the system into one of two states:
sleep mode or soft-off mode, depending on the BIOS or OS setting (see PWR
Button < 4 Secs in 4.5 Power Menu). When the power button is pressed for
more than 4 seconds, the system enters the soft-off mode regardless of the BIOS
setting.
•Fan Status Monitoring and Alarm: To prevent system overheat and system
damage, the CPU and system fans can be monitored for RPM and failure. All
fans are set for its normal RPM range and alarm thresholds.
•PowerLED(requiresACPIOSsupport):The power LED indicates the system
status.
•Remote Ring On (requires modem): This allows a computer to be turned on
remotely through an internal or external modem. With this benefit on-hand, users
can access vital information from their computers anywhere.
•System Resources Alert: Today’s operating systems such as Windows 95/98/
NT and OS/2, require much more memory and hard drive space to present
enormoususerinterfaces and run largeapplications. The systemresourcemonitor
warns the user before the system resources are used up to prevent possible
application crashes. Suggestions provide the user some information on managing
their limited resources more efficiently.
•Temperature Monitoring and Alert: CPU temperature is monitored by the
ASIC through the CPU’s internal thermal diode (on Pentium III and
Celeron) to prevent system overheat and system damage.
•Voltage Monitoring and Alert: System voltage levels are monitored to ensure
stable voltage to critical motherboard components. Voltage specifications are
more critical for future processors, so monitoring is necessary to ensure proper
system configuration and management.

12 D1271 / D1291 CUV-LSV / CUV-LV User’s Manual
2. FEATURES
2. FEATURES
Motherboard Parts
Location
Processor Support Socket 370 for Pentium III/Celeron Processors ....................... 1
Feature Setting DIP Switches ................................................... 4
Chipsets VIAVT82C694X System Controller ........................................ 3
VIAVT82C686A PCIset......................................................... 12
ATI Rage XL Video Chipset................................................... 10
4Mbit Programmable Flash EEPROM ................................... 11
Main Memory Maximum 2GB support
4 DIMM Sockets ...................................................................... 5
PC133 SDRAM support
Expansion Slots 4 PCI Slots .............................................................................. 17
System I/O 1 Floppy Disk Drive Connector ............................................... 7
2 IDE Connectors (UltraDMA/66 Support) ............................. 6
1 Parallel Port ............................................................... (Top) 22
1 Serial Port (COM1) ............................................. (Bottom) 22
1 Serial Port (COM2) ............................................................. 18
1 VGA Port ............................................................. (Bottom) 22
USB Connectors (Port 0 & Port 1) ........................................ 23
USB Connectors (Port 2 & Port 3) ......................................... 14
1 PS/2 Mouse Connector .............................................. (Top) 24
1 PS/2 Keyboard Connector ................................... (Bottom) 24
Network Features Intel 82559 Fast Ethernet Controllers .................................... 20
2 RJ-45 Connectors ................................................................ 21
Wake-On-LAN Connector...................................................... 16
Wake-On-Ring Connector ...................................................... 13
Hardware Monitoring System Voltage Monitoring (integrated in ASIC) ................. 15
2 Fan Power and Speed Monitoring Connectors
Power ATX Power Supply Connector ................................................. 2
Special Features LSI 32-bit Ultra160 SCSI Controller (optional)....................... 9
Onboard SCSI Connectors (optional)....................................... 8
Onboard LED ......................................................................... 19
Form Factor ATX
2.2 Motherboard Components
See opposite page for locations.

D1271/D1291 CUV-LSV/CUV-LV User’s Manual 13
2. FEATURES
2. FEATURES
Motherboard Parts
2.2.1 Component Locations
17
24
22
21
23
2
19
5
101115
16
1
89
20
13
18
7643
1214

3 HARDWARE SETUP
3.1 Motherboard Layout
PS/2
T: Mouse
B: Keyboard
USB1
USB2
COM1
VGA
PARALLEL PORT
ATX_POWER PWRFAN
CPU_FAN
4Mbit
Firmware
Hub
(FWH)
WOR
ASIC
withHardware
Monitor
CR2032 3V
Lithium Cell
CMOS Power
68-Pin Ultra 160/ Ultra3-Wide SCSI
Connector
PANEL
WOL_CON
Primary IDE
34
68
1
35
68-Pin Ultra 160/Ultra3-Wide
SCSI Connector
Fast
Ethernet
Controller
PCI 1
FLOPPY
IDE1
LSI SCSI
Controller
896/1010-33
VIA
VT82C694X
Chipset
DIMM Socket 1 (64/72-bit, 168-pin module
01
DIMM Socket 2 (64/72-bit, 168-pin module
23
DIMM Socket 3 (64/72-bit, 168-pin module
45
4
321 ON
8
765
Fast
Ethernet
Controller
DIP Switches
LAN1_EN
LAN2_EN
IR
VIA
VT82C686A
Chipset
BUZZER
CHAFAN
ATI
RAGE XL
VGA
Controller
COM2
Secondary IDE
SMB
PCI 2
PCI 3
PCI 4
ASMC Slot
IDELED
BP_SMB
JTPWR
USBPORT
JEN
SCSI_EN
CHA
CHB
RJ-45
LED
CHASSIS
24.5cm (9.64in)
30.5cm (12.0in)
NOTE: The LSI SCSI controller chipset and SCSI channels (CHA and CHB) are
optional components.
14 D1271 / D1291 CUV-LSV / CUV-LV User’s Manual

D1271/D1291 CUV-LSV/CUV-LV User’s Manual 15
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN p.17 JumperFree Mode Setting (Disable/Enable)
2) DIP_SW 5–8 p.18 CPU External Frequency Selection
3) DIP_SW 1-4 p. 19 CPU Core:BUS Frequency Multiple Selection
4) R56 p. 21 Clear RTC RAM
5) LAN-EN p. 21 LAN Setting
6) SCSI_EN p. 22 SCSI Setting (optional)
Expansion Slots/Sockets
1) DIMM 1/2/3/4 p. 24 DIMM Support
2) Socket 370 p. 25 CPU Support
3) PCI 1/2/3/4 p. 27 32-bit PCI Bus Expansion Slots
Connectors
1) PS2KBMS p. 29 PS/2 Mouse Port (6 pin-female)
2) PS2KBMS p. 29 PS/2 Keyboard Port (6-pin female)
3) USB p. 30 Universal Serial Bus Ports1&2(Two4-pin female)
4) PRINTER p. 30 Parallel Port (25-pin female)
5) COM1/COM2 p. 30 Serial Ports (9-pin /10-1 pin male)
6) VGA p. 31 Monitor Output Port (15-pin female)
7) RJ-45 p. 31 Fast Ethernet LAN Connectors (Two RJ-45)
8) HDLED p. 32 IDE and SCSI Activity LED (2-pin)
9) FLOPPY p. 32 Floppy Disk Drive Port Connector (34 pins)
10) PRIMARY IDE p. 33 IDE Connectors (Two 40-1 pins)
SECONDARY IDE
11) CHA/CHB p. 34 Ultra160 Wide SCSI Connectors (Two 68-pin)
12) WOL_CON p. 35 Wake-On-LAN Connector (3-pin)
13) WOR p. 35 Wake-On-Ring Connector (2-pin)
14) PWR/CPU/CHA_FAN p. 36 Power, CPU, and Chassis Fan Connectors (Three 3-pin)
15) USBPORT p. 36 USB2 Header (10-1 pins)
16) IR p. 37 Infrared Module Connector (5-pin)
17) CHASSIS p. 37 Chassis Intrusion Lead (2-pin)
18) ATXPWR p. 38 ATX Power Supply Connector (20 pins)
19) SMB/BP_SMB p. 38 SMBus Connectors (Two 5-1 pins)
20)
PWR.LED ( PANEL ) p. 39 System Power LED Lead (3-pin)
21) SPEAKER (PANEL) p. 39 System Warning Speaker Connector (4-pin)
22) MSG.LED (PANEL) p. 39 System Message LED (2-pin)
23) SMI (PANEL) p. 39 System Management Interrupt Lead (2- pin)
24) PWR.SW (PANEL) p. 39 ATX / Soft-Off Switch Lead (2-pin)
25) RESET (PANEL) p. 39 Reset Switch Lead (2-pin)
Layout Contents
3. H/W SETUP

16 D1271 / D1291 CUV-LSV / CUV-LV User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3.3 Hardware Setup Procedure
Before using your computer, you must complete the following steps:
1. Check motherboard settings
2. Install memory modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect Ribbon Cables, Panel Wires, and Power Supply
6. Setup the BIOS Software
3.4 Motherboard Settings
This section explains how to change your motherboard function settings through the
switches and/or jumpers.
WARNING! Computer motherboards and expansion cards contain very delicate
IntegratedCircuit (IC) chips.Toprotect themagainst damage fromstaticelectricity,
you should follow some precautions whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or
remove the ATX power connector on the motherboard.
WARNING! Make sure that you unplug the power supply when adding or
removing system components. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components. When lit, the onboard LED
indicates that the system is in suspend or soft-off mode, not powered OFF.
CUV-LSV
CUV-LSV Onboard LED
ON OFF
Standby
Power Powered
Off
LED1