Fujitsu Eternus dx80 s2 User manual

ETERNUS CLI User's Guide

P2X0-1030-09ENZ0

FUJITSU Storage ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2,

ETERNUS DX8100 S2/DX8700 S2 Disk storage systems

This page is intentionally left blank.

ETERNUS CLI User’s Guide

Preface

This manual describes how to use the Command Line Interface (CLI) to configure and manage a RAID system

using the FUJITSU Storage ETERNUS DX80 S2/DX90 S2 Disk storage system, ETERNUS DX410 S2/DX440 S2 Disk

storage system, or ETERNUS DX8100 S2/DX8700 S2 Disk storage system.

This manual is written for standard-level users who are familiar with the basic functions of the FUJITSU Storage

ETERNUS DX80 S2/DX90 S2 Disk storage system, ETERNUS DX410 S2/DX440 S2 Disk storage system, or

ETERNUS DX8100 S2/DX8700 S2 Disk storage system.

This manual is written for controller firmware version V10L50 or later. Some of the functions herein may not

be supported for firmware version V10L4x or earlier.

Note that the FUJITSU Storage ETERNUS DX80 S2/DX90 S2 Disk storage system, ETERNUS DX410 S2/DX440 S2

Disk storage system, and ETERNUS DX8100 S2/DX8700 S2 Disk storage system are represented as ETERNUS DX

Disk storage system in this document.

Ninth Edition

August 2015

Content and Structure

This manual contains the following six chapters and appendices:

●Chapter 1 Overview

This chapter introduces the ETERNUS DX Disk storage system Command Line Interface (CLI).

●Chapter 2 Status Display

This chapter explains the commands used for displaying the status details for the ETERNUS DX Disk storage

system as a whole, as well as for various ETERNUS DX Disk storage system components.

●Chapter 3 Configuration Settings and Display

This chapter explains the commands used for Thin Provisioning management, RAID group management,

volume management, and host interface management, these being the basic settings for the ETERNUS DX

Disk storage system.

●Chapter 4 Function/System Settings and Display

This chapter explains the commands used for user account management, advanced copy management,

network management (Redundant IP/SNMP etc.), date and time/NTP, system configuration (Box ID,

Storage system name), power synchronization, and SSH/SSL security configuration.

●Chapter 5 Information Settings and Display

This chapter explains the commands used to provide performance data and a variety of other information.

Preface

ETERNUS CLI User’s Guide

●Chapter 6 CLI Original Function

This section explains the commands used by some original functions of the CLI environment.

The appendices describe "Error Messages", "List of Supported Commands", "Firmware Version Support for Com-

mands", "Basic Settings", and "Default Value List".

Latest Information

The information in this manual is subject to change without notice for functionality expansion and

improvement of the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2, and the ETERNUS DX8100

S2/DX8700 S2 Disk storage systems. The latest version of this manual and the latest information of the

ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/DX440 S2, and the ETERNUS DX8100 S2/DX8700 S2 Disk

storage systems are released in the following web-site.

Access the following address if needed.

http://www.fujitsu.com/global/services/computing/storage/eternus/documentation/

Related Manuals

The following manuals contain further relevant information on the ETERNUS DX80 S2/DX90 S2, the ETERNUS

DX410 S2/DX440 S2, and the ETERNUS DX8100 S2/DX8700 S2:

•ETERNUS DX80 S2/DX90 S2 Disk storage system Overview

•ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-

•ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-

•ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-

•ETERNUS DX410 S2/DX440 S2 Disk storage system Overview

•ETERNUS DX410 S2/DX440 S2 Disk storage system User's Guide -Site Planning-

•ETERNUS DX410 S2/DX440 S2 Disk storage system User's Guide -Installation & Operation-

•ETERNUS DX8100 S2/DX8700 S2 Disk storage system User's Guide

•ETERNUS Web GUI User's Guide ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS

DX8100 S2/DX8700 S2

•ETERNUS DX Disk storage systems User's Guide -Server Connection- (*1)

*1: Download the necessary manuals to match the environment (such as the server OS and the Fibre Channel card

type) from the specified Web site. For the URL of the download site, refer to the Documentation CD that is

supplied with the ETERNUS DX Disk storage system.

Preface

ETERNUS CLI User’s Guide

Trademarks

•Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

•Oracle and Java are registered trademarks of Oracle and/or its affiliates.

•AIX is a trademark of IBM Corp.

•Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.

•HP-UX is a trademark of Hewlett-Packard Company in the United States and other countries.

•VMware, VMware logos, Virtual SMP, and VMotion are either registered trademarks or trademarks of

VMware, Inc. in the U.S. and/or other countries.

•VERITAS Volume Manager is a trademark of Symantec Corp. and its affiliated companies.

•The company names, product names and service names mentioned in this document are registered

trademarks or trademarks of their respective companies.

Additional Information

■Naming conventions

•Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS.

•The following abbreviations are used for Microsoft® Windows Server®.

Official name Abbreviation

Microsoft® Windows Server® 2008 R2 Datacenter

Windows Server 2008 R2

Microsoft® Windows Server® 2008 R2 Enterprise

Microsoft® Windows Server® 2008 R2 Standard

Microsoft® Windows Server® 2008 R2 for Itanium-Based Systems

Microsoft® Windows Server® 2008 R2 HPC Edition

Microsoft® Windows Server® 2008 Datacenter

Windows Server 2008

Microsoft® Windows Server® 2008 Enterprise

Microsoft® Windows Server® 2008 Standard

Microsoft® Windows Server® 2008 for Itanium-Based Systems

Microsoft® Windows Server® 2008 HPC Edition

Microsoft® Windows Server® 2003, Datacenter Edition

Windows Server 2003Microsoft® Windows Server® 2003, Enterprise Edition

Microsoft® Windows Server® 2003, Standard Edition

Preface

ETERNUS CLI User’s Guide

■Typographic conventions

•Italics are used to show variables such as values and characters that appear in command parameters and

output examples.

■Symbol conventions

The following symbols are used throughout this manual:

Typeface Meaning Example

[ ] Brackets indicate that the enclosed parameter is optional. [

parameter

]

[ | ] A separator within brackets indicates that only one of the

separated parameters can be specified.

[

parameter

]

{ | } A separator within braces indicates that only one of the

separated parameters must be specified.

Note that some cases, two or more parameters can be

specified by separating them with a comma.

{

parameter

}

This symbol indicates restrictions and cautions for setting up and operating the

ETERNUS DX Disk storage system.

This symbol indicates supplementary information about functions and methods

that may be useful when setting up and operating the ETERNUS DX Disk storage

system.

ETERNUS CLI User’s Guide

Table of Contents

Chapter 1 Overview 18

1.1 Accessing CLI ..................................................................................................................... 18

1.2 The Command Syntax ....................................................................................................... 19

1.2.1 Command Format ..........................................................................................................................................19

1.2.2 Keywords and Parameters ............................................................................................................................. 19

1.2.3 Disk Syntax ....................................................................................................................................................19

1.2.4 Alias Name Syntax ......................................................................................................................................... 20

1.2.5 Thin Provisioning Pool Syntax ........................................................................................................................20

1.2.6 Flexible Tier Pool Syntax ................................................................................................................................21

1.2.7 Flexible Tier Sub Pool Syntax ......................................................................................................................... 21

1.2.8 RAID Group Syntax .........................................................................................................................................22

1.2.9 Volume Syntax ...............................................................................................................................................22

1.2.10 Host Syntax ...................................................................................................................................................23

1.2.11 Affinity Group Syntax .....................................................................................................................................24

1.2.12 Host Response Syntax .................................................................................................................................... 24

1.2.13 ECO Schedule Syntax .....................................................................................................................................25

1.2.14 Host Interface Port Syntax .............................................................................................................................25

1.2.15 Port Group Syntax ..........................................................................................................................................26

1.2.16 Host Group Syntax ......................................................................................................................................... 26

1.3 Size of Devices and Logical Units ...................................................................................... 27

1.4 Command Auto-complete and History Recall .................................................................... 27

1.5 Command Editing Hotkeys ................................................................................................ 28

1.6 Viewing Command Help .................................................................................................... 29

1.7 Error Message Format ....................................................................................................... 29

1.8 Multiple Sessions .............................................................................................................. 30

1.9 Slave Controller Logins ...................................................................................................... 30

1.10 CLI User Authority ............................................................................................................. 31

1.11 Note for Specifying FTP Server ........................................................................................... 31

1.12 Command Descriptions ..................................................................................................... 31

Table of Contents

ETERNUS CLI User’s Guide

Chapter 2 Status Display 32

2.1 Storage System Status ...................................................................................................... 32

show status .............................................................................................................................................. 33

show enclosure-status .............................................................................................................................. 34

show fru-ce ...............................................................................................................................................41

show fru-de .............................................................................................................................................. 62

show disks ................................................................................................................................................64

show hardware-information ..................................................................................................................... 67

Chapter 3 Configuration Settings and Display 69

3.1 Thin Provisioning Pool Management ................................................................................ 69

3.1.1 Thin Provisioning Pool ...................................................................................................................................69

set thin-pro-license ..................................................................................................................................71

delete thin-pro-license .............................................................................................................................72

show thin-pro-license ............................................................................................................................... 73

create thin-pro-pool .................................................................................................................................74

set thin-pro-pool ......................................................................................................................................77

delete thin-pro-pool ................................................................................................................................. 78

show thin-pro-pools ................................................................................................................................. 79

show thin-pro-pool-progress .................................................................................................................... 81

expand thin-pro-pool ...............................................................................................................................83

format thin-pro-pool ................................................................................................................................85

3.1.2 Thin Provisioning Pool ECO Management ......................................................................................................86

set eco-thin-pro-pool ............................................................................................................................... 87

release eco-thin-pro-pool .........................................................................................................................89

show eco-thin-pro-pool ............................................................................................................................ 90

3.2 Flexible Tier Management ................................................................................................ 91

3.2.1 Flexible Tier Pools ..........................................................................................................................................91

show flexible-tier-mode ........................................................................................................................... 92

delete flexible-tier-pool ........................................................................................................................... 93

show flexible-tier-pools ............................................................................................................................94

show flexible-tier-pool-progress ..............................................................................................................97

set flexible-tier-sub-pool .......................................................................................................................... 99

show flexible-tier-sub-pools ...................................................................................................................101

3.2.2 FTRPE Migration ..........................................................................................................................................104

show ftrpe-migration ............................................................................................................................. 105

3.2.3 FTV Balancing ..............................................................................................................................................106

start balancing-flexible-tier-pool ........................................................................................................... 107

stop balancing-flexible-tier-pool ............................................................................................................ 108

show balancing-flexible-tier-pools .........................................................................................................109

Table of Contents

ETERNUS CLI User’s Guide

3.3 RAID Group Management ............................................................................................... 111

3.3.1 RAID Group ..................................................................................................................................................111

create raid-group ...................................................................................................................................112

set raid-group ........................................................................................................................................114

delete raid-group ...................................................................................................................................117

show raid-groups ...................................................................................................................................118

show raid-group-progress ......................................................................................................................120

expand raid-group .................................................................................................................................122

3.3.2 Hot Spares ................................................................................................................................................... 123

set global-spare .....................................................................................................................................124

release global-spare ............................................................................................................................... 125

set dedicated-spare ................................................................................................................................ 126

release dedicated-spare .........................................................................................................................127

3.3.3 ECO Management ........................................................................................................................................128

set eco-mode .........................................................................................................................................129

show eco-mode ......................................................................................................................................130

create eco-schedule ...............................................................................................................................131

set eco-schedule ....................................................................................................................................134

delete eco-schedule ............................................................................................................................... 137

show eco-schedule .................................................................................................................................138

set eco-raid-group .................................................................................................................................. 140

release eco-raid-group ...........................................................................................................................142

show eco-raid-group ..............................................................................................................................143

3.4 Volume Management ..................................................................................................... 144

3.4.1 Volume ........................................................................................................................................................144

create volume ........................................................................................................................................ 145

set volume ............................................................................................................................................. 149

delete volume ........................................................................................................................................ 151

delete all-volumes ................................................................................................................................. 152

show volumes ........................................................................................................................................153

show volume-progress ...........................................................................................................................158

show volume-mapping .......................................................................................................................... 160

format volume ....................................................................................................................................... 162

expand volume ......................................................................................................................................163

start migration .......................................................................................................................................165

stop migration .......................................................................................................................................167

show migration ......................................................................................................................................168

start balancing-thin-pro-volume ............................................................................................................169

stop balancing-thin-pro-volume ............................................................................................................ 170

show balancing-thin-pro-volumes .........................................................................................................171

start zero-reclamation ............................................................................................................................173

stop zero-reclamation ............................................................................................................................174

3.4.2 Flexible Tier Volumes ...................................................................................................................................175

create flexible-tier-volume ..................................................................................................................... 176

set flexible-tier-volume ..........................................................................................................................178

format flexible-tier-volume .................................................................................................................... 180

Table of Contents

ETERNUS CLI User’s Guide

expand flexible-tier-volume ................................................................................................................... 181

delete flexible-tier-volume .....................................................................................................................182

delete all-flexible-tier-volumes ..............................................................................................................183

start flexible-tier-migration ...................................................................................................................184

3.4.3 ODX Buffer Volume ......................................................................................................................................186

set odx-mode .........................................................................................................................................187

show odx-mode .....................................................................................................................................188

create odx-buffer-volume ....................................................................................................................... 189

set odx-buffer-volume ............................................................................................................................ 191

delete odx-buffer-volume ...................................................................................................................... 192

3.5 Host Interface Management ........................................................................................... 193

3.5.1 Host Interface Port Parameters .................................................................................................................... 195

set fc-parameters ...................................................................................................................................196

show fc-parameters ................................................................................................................................ 200

set sas-parameters .................................................................................................................................204

show sas-parameters ............................................................................................................................. 206

set iscsi-parameters ...............................................................................................................................208

show iscsi-parameters ............................................................................................................................ 217

set fcoe-parameters ...............................................................................................................................220

show fcoe-parameters ............................................................................................................................ 223

3.5.2 Host Identifiers (Host Alias) ......................................................................................................................... 226

create host-wwn-name .......................................................................................................................... 227

set host-wwn-name ...............................................................................................................................229

delete host-wwn-name ..........................................................................................................................230

show host-wwn-names ..........................................................................................................................231

discover host-wwn-names ...................................................................................................................... 232

create host-sas-address .......................................................................................................................... 233

set host-sas-address ............................................................................................................................... 235

delete host-sas-address .........................................................................................................................237

show host-sas-addresses ........................................................................................................................238

discover host-sas-addresses ...................................................................................................................239

create host-iscsi-name ........................................................................................................................... 240

set host-iscsi-name ................................................................................................................................243

delete host-iscsi-name ...........................................................................................................................246

show host-iscsi-names ...........................................................................................................................247

discover host-iscsi-names .......................................................................................................................249

3.5.3 Affinity Groups .............................................................................................................................................251

create affinity-group ..............................................................................................................................252

set affinity-group ...................................................................................................................................254

copy affinity-group .................................................................................................................................256

delete affinity-group ..............................................................................................................................257

show affinity-groups ..............................................................................................................................258

3.5.4 LUN Groups ..................................................................................................................................................260

create lun-group ....................................................................................................................................261

set lun-group ......................................................................................................................................... 263

copy lun-group .......................................................................................................................................265

Table of Contents

ETERNUS CLI User’s Guide

delete lun-group .................................................................................................................................... 266

show lun-groups .................................................................................................................................... 267

set host-path-state .................................................................................................................................269

show host-path-state ............................................................................................................................. 270

3.5.5 Mapping (When Affinity Groups are Used) ..................................................................................................272

set host-affinity ......................................................................................................................................273

copy host-affinity ...................................................................................................................................276

release host-affinity ...............................................................................................................................277

show host-affinity ..................................................................................................................................279

3.5.6 Mapping (When Host Affinity Mode is Not Used) ........................................................................................283

set mapping ........................................................................................................................................... 284

copy mapping ........................................................................................................................................286

release mapping ....................................................................................................................................287

show mapping ....................................................................................................................................... 289

3.5.7 Host Response .............................................................................................................................................291

set host-response ...................................................................................................................................292

delete host-response .............................................................................................................................. 296

show host-response ............................................................................................................................... 297

3.5.8 Host Sense Conversion .................................................................................................................................299

set host-sense ........................................................................................................................................300

delete host-sense ................................................................................................................................... 302

show host-sense .....................................................................................................................................303

3.5.9 Reset Group for Host Interface Port ..............................................................................................................304

set ca-reset-group .................................................................................................................................. 305

show ca-reset-group ...............................................................................................................................306

3.5.10 Ping Command for iSCSI hosts .....................................................................................................................307

test iscsi-ping .........................................................................................................................................308

3.5.11 Port Groups ..................................................................................................................................................310

create port-group ...................................................................................................................................311

set port-group ........................................................................................................................................312

delete port-group ...................................................................................................................................314

show port-groups ................................................................................................................................... 315

3.5.12 Host Groups .................................................................................................................................................317

create host-group ...................................................................................................................................318

set host-group ........................................................................................................................................320

delete host-group ..................................................................................................................................322

show host-groups ...................................................................................................................................323

3.5.13 Host LU QoS .................................................................................................................................................326

set host-lu-qos-mode ............................................................................................................................. 327

show host-lu-qos-mode ......................................................................................................................... 328

set lu-qos-group .....................................................................................................................................329

show lu-qos-groups ................................................................................................................................ 331

delete lu-qos-group ................................................................................................................................333

set host-lu-qos .......................................................................................................................................334

show host-lu-qos .................................................................................................................................... 338

set lu-qos-schedule ................................................................................................................................343

Table of Contents

ETERNUS CLI User’s Guide

show lu-qos-schedule .............................................................................................................................346

start host-lu-qos-performance ...............................................................................................................347

stop host-lu-qos-performance ................................................................................................................ 348

show host-lu-qos-performance .............................................................................................................. 349

Chapter 4 Function/System Settings and Display 356

4.1 User Management .......................................................................................................... 356

4.1.1 Role ............................................................................................................................................................. 356

create role ..............................................................................................................................................358

set role ...................................................................................................................................................359

delete role .............................................................................................................................................. 360

show role ...............................................................................................................................................361

create user .............................................................................................................................................362

set user .................................................................................................................................................. 363

delete user ............................................................................................................................................. 364

show users ............................................................................................................................................. 365

show login-users ....................................................................................................................................366

set password ..........................................................................................................................................367

initialize all-users ...................................................................................................................................368

import ssh-public-key ............................................................................................................................. 369

delete ssh-public-key .............................................................................................................................371

4.1.2 RADIUS Server Settings ................................................................................................................................372

set radius ...............................................................................................................................................373

show radius ............................................................................................................................................376

4.2 Advanced Copy Management .......................................................................................... 378

4.2.1 SnapOPC+ Outline ........................................................................................................................................379

4.2.2 Preparations for the Advanced Copy Function .............................................................................................. 379

4.2.3 Copy Session Management .......................................................................................................................... 383

set advanced-copy-license .....................................................................................................................385

delete advanced-copy-license ................................................................................................................386

show advanced-copy-license .................................................................................................................. 387

set advanced-copy-policy ....................................................................................................................... 389

show advanced-copy-policy .................................................................................................................... 390

set advanced-copy-parameters .............................................................................................................. 391

show advanced-copy-parameters ........................................................................................................... 393

initialize snap-data-volume ...................................................................................................................394

show snap-data-volume .........................................................................................................................395

show snap-data-pool ............................................................................................................................. 396

delete snap-data-pool-volume ...............................................................................................................398

start advanced-copy ............................................................................................................................... 399

stop advanced-copy ...............................................................................................................................400

show advanced-copy-sessions ................................................................................................................ 401

4.2.4 Remote Equivalent Copy Management ........................................................................................................408

Table of Contents

ETERNUS CLI User’s Guide

4.2.5 Summaries of REC Environment Settings through CLI ..................................................................................409

set host-port-mode ................................................................................................................................ 419

show host-port-mode .............................................................................................................................421

import rec-path ......................................................................................................................................422

show rec-path ........................................................................................................................................ 424

export backup-rec-path ..........................................................................................................................427

show backup-rec-path-information ........................................................................................................429

convert rec-path .....................................................................................................................................430

measure rec-round-trip-time ..................................................................................................................432

set rec-round-trip-time ........................................................................................................................... 434

set rec-multiplicity .................................................................................................................................435

set rec-buffer ..........................................................................................................................................437

delete rec-buffer .................................................................................................................................... 441

show rec-buffer ......................................................................................................................................442

create rec-disk-buffer .............................................................................................................................443

set rec-disk-buffer ..................................................................................................................................445

delete rec-disk-buffer .............................................................................................................................446

show rec-disk-buffer ............................................................................................................................... 447

format rec-disk-buffer ............................................................................................................................449

release rec-disk-buffer ........................................................................................................................... 450

4.3 Network Management .................................................................................................... 451

4.3.1 Network Settings .........................................................................................................................................451

set network ............................................................................................................................................452

show network ......................................................................................................................................... 458

set firewall ............................................................................................................................................. 463

show firewall ..........................................................................................................................................466

4.3.2 SNMP ........................................................................................................................................................... 468

set snmp ................................................................................................................................................469

show snmp ............................................................................................................................................. 471

create snmp-manager ............................................................................................................................472

set snmp-manager .................................................................................................................................473

delete snmp-manager ............................................................................................................................ 474

show snmp-manager .............................................................................................................................475

create snmp-view ...................................................................................................................................476

set snmp-view ........................................................................................................................................478

delete snmp-view ...................................................................................................................................480

show snmp-view ....................................................................................................................................481

create snmp-user ...................................................................................................................................483

set snmp-user ........................................................................................................................................485

delete snmp-user ...................................................................................................................................487

show snmp-user .....................................................................................................................................489

create community-profile .......................................................................................................................491

set community-profile ............................................................................................................................ 493

delete community-profile .......................................................................................................................495

show community-profile ........................................................................................................................496

set snmp-trap .........................................................................................................................................498

Table of Contents

ETERNUS CLI User’s Guide

delete snmp-trap ...................................................................................................................................500

show snmp-trap .....................................................................................................................................501

test snmp-trap .......................................................................................................................................502

export enhanced-mib ............................................................................................................................. 503

4.3.3 E-mail Notification ...................................................................................................................................... 505

set email-notification .............................................................................................................................506

show email-notification ......................................................................................................................... 511

test email ...............................................................................................................................................513

4.3.4 Event Notification ........................................................................................................................................514

set event-notification ............................................................................................................................. 515

show event-notification .........................................................................................................................522

set lcd-suppress ......................................................................................................................................524

show lcd-suppress .................................................................................................................................. 526

4.3.5 SMI-S ........................................................................................................................................................... 527

set smi-s .................................................................................................................................................528

show smi-s ............................................................................................................................................. 529

4.3.6 SSH/SSL Security Configuration ....................................................................................................................530

create ssh-server-key ............................................................................................................................. 533

create ssl-certificate ............................................................................................................................... 534

export ssl-certificate-request ..................................................................................................................536

import ssl-certificate ..............................................................................................................................540

4.3.7 AIS Connect Settings ....................................................................................................................................541

set ais-connect .......................................................................................................................................542

show ais-connect ....................................................................................................................................547

set ais-connect-remote-session ..............................................................................................................549

test ais-connect ......................................................................................................................................550

send ais-connect-log ..............................................................................................................................551

test ais-connect-event-notification ........................................................................................................552

import ais-ssl-certificate .........................................................................................................................553

4.4 Miscellaneous ................................................................................................................. 554

4.4.1 Date, Time and NTP .....................................................................................................................................554

set date ..................................................................................................................................................555

show date .............................................................................................................................................. 558

set ntp .................................................................................................................................................... 559

show ntp ................................................................................................................................................560

4.4.2 ETERNUS DX Disk Storage System Name ......................................................................................................561

set storage-system-name .......................................................................................................................562

show storage-system-name ................................................................................................................... 563

4.4.3 Encryption Mode .......................................................................................................................................... 564

set encryption ........................................................................................................................................565

show encryption .....................................................................................................................................566

4.4.4 Box ID ..........................................................................................................................................................567

set boxid ................................................................................................................................................568

show boxid ............................................................................................................................................. 569

Table of Contents

ETERNUS CLI User’s Guide

4.4.5 Power Synchronization ................................................................................................................................ 570

set power-synchronization .....................................................................................................................571

show power-synchronization .................................................................................................................. 574

4.4.6 Self-Encrypted Disk (SED) Authentication Settings ...................................................................................... 576

set sed-authentication ........................................................................................................................... 577

show sed-authentication ........................................................................................................................578

4.4.7 Syslog Server Settings ..................................................................................................................................579

set syslog-notification ............................................................................................................................ 580

show syslog-notification ......................................................................................................................... 582

4.4.8 Audit Log Settings ....................................................................................................................................... 583

set audit .................................................................................................................................................584

show audit .............................................................................................................................................586

4.4.9 Key Management Server Linkage Function .................................................................................................. 587

set sed-key-machine-name .................................................................................................................... 589

show sed-key-machine-name ................................................................................................................590

set sed-key-server ..................................................................................................................................591

show sed-key-servers .............................................................................................................................592

import ssl-kmip-certificate .....................................................................................................................593

create sed-key-group ............................................................................................................................. 594

set sed-key-group ..................................................................................................................................596

delete sed-key-group ............................................................................................................................. 598

show sed-key-groups ............................................................................................................................. 599

change sed-key ...................................................................................................................................... 601

recover sed-key-group ............................................................................................................................ 602

4.4.10 Shutdown/Restart System ............................................................................................................................ 603

shutdown ............................................................................................................................................... 604

Chapter 5 Information Settings and Display 605

5.1 Performance ................................................................................................................... 605

5.1.1 Performance Information ............................................................................................................................ 605

start performance ................................................................................................................................... 606

stop performance ................................................................................................................................... 607

show performance .................................................................................................................................. 608

5.1.2 Performance Tuning Parameters ................................................................................................................. 616

set raid-tuning .......................................................................................................................................617

show raid-tuning ....................................................................................................................................619

set cache-parameters .............................................................................................................................620

show cache-parameters ......................................................................................................................... 622

5.2 Event Log Information .................................................................................................... 623

show events ...........................................................................................................................................624

delete events .........................................................................................................................................626

Table of Contents

ETERNUS CLI User’s Guide

5.3 Maintenance ................................................................................................................... 627

5.3.1 Hardware Maintenance ...............................................................................................................................627

hot expansion ........................................................................................................................................ 628

show btu-date ........................................................................................................................................630

5.3.2 Remote Directory .........................................................................................................................................631

show remote-dir .....................................................................................................................................632

5.3.3 Controller Firmware .....................................................................................................................................634

show firmware-version ...........................................................................................................................635

5.3.4 Log ..............................................................................................................................................................636

export log ...............................................................................................................................................637

5.3.5 Panic Dump .................................................................................................................................................640

export panic-dump .................................................................................................................................641

show panic-dump ................................................................................................................................... 644

5.3.6 Configuration Information ........................................................................................................................... 645

export config-information ......................................................................................................................646

show config-information ........................................................................................................................648

5.3.7 Error Information ......................................................................................................................................... 649

show disk-error ...................................................................................................................................... 650

clear disk-error ....................................................................................................................................... 651

show port-error ......................................................................................................................................652

5.3.8 Bad Data Information in Volumes ................................................................................................................ 655

show bad-data-info ................................................................................................................................ 656

5.4 Utility .............................................................................................................................. 658

5.4.1 Diagnosis Utilities ........................................................................................................................................658

show diagnosis ....................................................................................................................................... 659

5.4.2 LED .............................................................................................................................................................. 665

set led ....................................................................................................................................................666

show led .................................................................................................................................................667

5.4.3 Other Notification ........................................................................................................................................ 668

set event-parameters .............................................................................................................................669

show event-parameters .........................................................................................................................670

5.4.4 Sub-system Parameters ............................................................................................................................... 671

set subsystem-parameters .....................................................................................................................672

show subsystem-parameters .................................................................................................................. 674

5.4.5 Reservations ................................................................................................................................................ 675

release reservation ................................................................................................................................. 676

show reservation ....................................................................................................................................677

5.4.6 Cache Utilities ..............................................................................................................................................679

show pinned-data ..................................................................................................................................680

Table of Contents

ETERNUS CLI User’s Guide

Chapter 6 CLI Original Function 682

6.1 CLI Environment .............................................................................................................. 682

set clienv-force-unlock ........................................................................................................................... 683

set clienv-idle-timeout ...........................................................................................................................684

logoff/logout/exit ...................................................................................................................................685

help ........................................................................................................................................................686

Appendix A Error Messages 688

Appendix B List of Supported Commands 703

B.1 List of Supported Commands ........................................................................................... 703

B.2 List of Supported Commands (Policies)............................................................................ 712

B.3 List of Supported Commands (Default Roles)................................................................... 722

Appendix C Firmware Version Support for Commands 731

Appendix D Basic Setting Examples 739

D.1 Settings When Using Volumes ......................................................................................... 739

D.1.1 RAID Configuration Setting Procedure ......................................................................................................... 740

D.1.2 Host Access Setting Procedure..................................................................................................................... 741

D.2 Settings for Various Host Accesses ................................................................................... 742

D.2.1 Specifying a Host and Performing Mapping (Host Affinity Mode)................................................................ 743

D.2.2 Specifying a Port Group and Performing LUN Mapping................................................................................ 744

D.2.3 Specifying a Port and Setting LUN Mapping ................................................................................................ 745

D.3 Setting Cancellation.........................................................................................................746

D.3.1 Canceling Mapping...................................................................................................................................... 747

D.3.2 Deleting Affinity Groups .............................................................................................................................. 747

D.3.3 Deleting LUN Groups ................................................................................................................................... 748

D.3.4 Deleting Port Groups ................................................................................................................................... 748

D.3.5 Deleting Host Groups................................................................................................................................... 748

D.3.6 Deleting Registered Hosts ........................................................................................................................... 749

D.3.7 Deleting Volumes ........................................................................................................................................ 749

D.3.8 Deleting RAID Groups .................................................................................................................................. 749

Appendix E Default Value List 750

ETERNUS CLI User’s Guide

Chapter 1

Overview

ETERNUS DX Disk storage system command line interface (hereinafter referred to as "CLI") is installed in

controllers of the ETERNUS DX Disk storage system. CLI is used for performing settings and maintenance via

commands and command scripts.

This chapter describes the outlines for the CLI.

1.1 Accessing CLI

The CLI software embedded in each ETERNUS DX Disk storage system controller module enables storage

systems to be configured, monitored, and managed. This may be done via LAN connection to the controller

module's Ethernet port, using telnet, an SSH application, or a terminal emulator on a remote administrator

client. For telnet connection, a user name and password are required. For SSH, in addition to a user name and

password, SSH public key authentication is also supported. For details, refer to the "import ssh-public-key"

command.

Default IP address, user name, and password are as follows:

CLI will display the following pre-login message on the terminal:

The date and time are the local values. However, this message may not be displayed when logged in with

SSH. This is due to the fact it depends on terminal software.

IP address: 192.168.1.1

user name: root

password: root

ETERNUS login is required. [2010-01-01 05:38:00]

Chapter 1 Overview

1.2 The Command Syntax

ETERNUS CLI User’s Guide

1.2 The Command Syntax

This section explains command syntax.

1.2.1 Command Format

The command format is as follows:

•Basically, a command name consists of a verb section and an object section (Example: "create volume").

However, there are also some commands that consist of one word (Example: "logoff" and "shutdown").

•A parameter consists of a parameter name section and an operand section. A parameter name is

appended with a hyphen (-) before it (Example: "-name").

•An operand is always required after a parameter name (Example: "-name abcdef").

1.2.2 Keywords and Parameters

Command and parameter names are not case-sensitive and can be entered in either or both uppercase and

lowercase. Operands, however, are case-sensitive. Any of the printable ASCII codes 0x20 – 0x7e (hexadecimal

notation) are allowed as input characters. Note that the following additional restrictions apply:

•Question marks (?) cannot be used.

•When spaces ( ) are used as characters, they must be enclosed by double quotation marks (") (Example:

"ABC DEF","ABC DEF,GHIJKL").

•When double quotation marks (") and single quotation marks (') are used as characters, they must be

backslash(\) escaped. Example: "\"

1.2.3 Disk Syntax

The format that can used for disk drive numbers is either "xxyy" or "xyy". "xx" or "x" indicates the enclosure

number. "xx" indicates a 2-digit number for the enclosure number and "x" indicates a one digit number for the

enclosure number. When a 2-digit enclosure number is specified, the format "xxyy" must be used. When a 1-

digit enclosure number is specified, either format can be specified. For example, "1yy" can be specified for a 1-

digit number. However, if the format "xx" is used, 0 must be specified before the enclosure number. For

example, when an enclosure number is 1, "01yy" must be specified. For ETERNUS DX80 S2/DX90 S2, 00 or 0

indicates the controller enclosure. The "yy" is the disk drive number (a 2-digit decimal). For a 3.5" disk drive,

between 00 and 11 (a 2-digit decimal) can be specified for "yy". For a 2.5" disk drive, between 00 and 23 can

be specified for "yy".

Command name Parameter Parameter . . . Parameter

command-name: Verb section + Object section (Ex: create volume)

parameter: Hyphen(-) + Parameter name section + Operand section (Ex: -n 80)

Chapter 1 Overview

1.2 The Command Syntax

ETERNUS CLI User’s Guide

Disk numbers can be combined as follows:

•A single disk number: 1003

•A list of disk numbers: 1003,004

•A hyphenated range of disk numbers from a to z: 0210-0211

•A list of disk numbers, disk ranges, or both, separated by commas. Spaces are not permitted before or after

commas: 0003,0006,010-011

1.2.4 Alias Name Syntax

The format of an alias is a character string that has a maximum of 16 ASCII characters. Usable characters are

those given in "1.2.2 Keywords and Parameters" (page 19) of the document overview. Commas (,) cannot be

used.

1.2.5 Thin Provisioning Pool Syntax

There are two methods for specifying Thin provisioning pool identifiers; Thin provisioning pool numbers or

Thin provisioning pool names.

•Thin provisioning pool number

A Thin provisioning pool number is automatically created by the system when a Thin provisioning pool is

created. This is a decimal number. Thin provisioning pool numbers can be displayed by using the "show

thin-pro-pools" command.

Thin provisioning pool numbers can be combined as follows:

-A single Thin provisioning pool number: 1

-A list of Thin provisioning pool numbers: 1,8,12

-A hyphenated range of Thin provisioning pool numbers from a to z: 2-5

-A list of Thin provisioning pool numbers, Thin provisioning pool ranges, or both, separated by commas.

Spaces are not permitted before or after commas: 1,3,10-12

•Thin provisioning pool name

A Thin provisioning pool name must be specified when creating a Thin provisioning pool. For details about

the syntax, refer to "1.2.4 Alias Name Syntax" (page 20). Some commands accept a comma-separated list

of Thin provisioning pool names. A Thin provisioning pool name and a Thin provisioning pool number

cannot both be specified in the same command. Do not include spaces before or after commas.

•Two or more parameters might not be able to be specified for several commands. For details, refer to the

command descriptions.

•Since Thin provisioning pools and Flexible Tier Sub Pools use the same resource, the same number and

name cannot be used for both a Thin provisioning pool and a Flexible Tier Sub Pool. If the Thin

Provisioning pool number or the Thin Provisioning Pool name that is specified for a command is already

used for an FTSP, the command is not executed.

Other manuals for Eternus DX80 S2

This manual suits for next models

Table of contents

Other Fujitsu Network Storage Server manuals

Fujitsu

Fujitsu ETERNUS CS800 S6 Troubleshooting guide

Fujitsu

Fujitsu Eternus DX80 S2 Manual

Fujitsu

Fujitsu Q802 User manual

Fujitsu

Fujitsu ETERNUS DX60 Guide

Fujitsu

Fujitsu Eternus DX80 S2 Manual

Fujitsu

Fujitsu ETERNUS2000 model 100 Instruction Manual

Popular Network Storage Server manuals by other brands

NEC

NEC NEC Express5800 Series user guide

LaCie

LaCie 301257U - 1 TB 2big Network Attached Storage Hard... user manual

Acorn

Acorn FileStore E01 Service manual

Dell

Dell XC720xd owner's manual

Infortrend

Infortrend EonStor GSe Pro 208 Hardware manual

Monoprice

Monoprice 12186 user manual

QNAP

QNAP Turbo NAS user manual

American Megatrends

American Megatrends StorTrends 2104 user guide

Western Digital

Western Digital Sentinel RX4100 Maintenance Guide

Adaptec

Adaptec 5325301570 - Snap Server 1100 NAS datasheet

Hitachi

Hitachi 2000 Series Hardware reference

Supermicro

Supermicro SSG-927R-E2CJB user manual

NETGEAR

NETGEAR ReadyNAS Pro Pioneer user guide

napp-it

napp-it ZFS Storage user guide

Western Digital

Western Digital My Book Pro user manual

Compaq

Compaq StorageWorks TM RAID Array 3000 Pedestal Storage... user guide

D-Link

D-Link ShareCenter DNS-343 Quick install guide

Buffalo

Buffalo TeraStation 3010 user manual

Fujitsu Eternus DX80 S2 User manual

Popular Network Storage Server manuals by other brands